Slant *        6        Forum
Home Home Home
The Place to Go for Slant Six Info!
Click here to help support the Slant Six Forum upgrade!
It is currently Mon Oct 15, 2018 3:48 am

All times are UTC-07:00




Post new topic  Reply to topic  [ 8 posts ] 
Author Message
PostPosted: Mon Nov 27, 2017 7:39 am 
Offline
4 BBL ''Hyper-Pak''

Joined: Wed Feb 15, 2017 6:57 am
Posts: 27
Car Model*:
Hello. I am installing A/C on my 65 Dart GT. I am looking for recommendations and hopefully pictures as to where I should drill through the firewall. I bought the aftermarket kit that has the box that mounts under the center of the dash.

Thank you for your time.


Top
   
PostPosted: Mon Nov 27, 2017 9:48 am 
Offline
Board Sponsor & Contributor

Joined: Thu Oct 31, 2002 5:39 pm
Posts: 23002
Location: North America
Car Model*:
What kind of A/C setup are you putting in?

_________________
一期一会
Too many people who were born on third base actually believe they've hit a triple.

Image


Top
   
PostPosted: Mon Nov 27, 2017 10:17 am 
Offline
4 BBL ''Hyper-Pak''

Joined: Wed Feb 15, 2017 6:57 am
Posts: 27
Car Model*:
Hello Dan. I purchased the Nostalgic Air Saden Kit. I'm using their supplied bracket.


Top
   
PostPosted: Wed Jan 17, 2018 12:30 pm 
Offline
4 BBL ''Hyper-Pak''

Joined: Wed Feb 15, 2017 6:57 am
Posts: 27
Car Model*:
Hello. Just checking to see if anyone has pictures or best location as to where to punch through the firewall for A/C line installation.


Top
   
PostPosted: Wed Jan 17, 2018 4:42 pm 
Offline
Contributor
User avatar

Joined: Sun Nov 03, 2002 9:29 am
Posts: 1002
Location: Texas
Car Model*: 1964 Valiant convertible 225 automatic
Schmoe wrote:
Hello. Just checking to see if anyone has pictures or best location as to where to punch through the firewall for A/C line installation.


My installation uses Vintage Air parts and behind the dash location, but maybe this article about my '64 Valiant installation will help a little.
http://www.slantsix.org/articles/vintag ... ge_Air.htm


Top
   
PostPosted: Fri Jan 19, 2018 12:26 pm 
Offline
4 BBL ''Hyper-Pak''

Joined: Wed Feb 15, 2017 6:57 am
Posts: 27
Car Model*:
Thank you. Yes, this is helpful. I am keeping the factory heater core, so mine will be a bit different. Perhaps I cut through in the location where this person has re-routed the heater hoses.

I have a Clifford valve cover and the engine is out getting built, so it seems like I can't go any further until I get the engine in. The last thing I want to do is drill holes and then find that the valve cover is in the way of my line fittings.


Top
   
PostPosted: Fri Jan 19, 2018 5:59 pm 
Offline
SL6 Racer & Moderator
User avatar

Joined: Sat Oct 19, 2002 12:06 pm
Posts: 6910
Location: Silver Springs, Fl.
Car Model*:
Here is a link to an install I did some years ago
http://www.forabodiesonly.com/mopar/thr ... tem.51820/

_________________
Charrlie_S
65 Valiant 100 2dr post 170 turbo
66 Valiant Signet 225 nitrous
64 Valiant Signet
64 Valiant 4dr 170


Top
   
PostPosted: Wed Jan 31, 2018 12:15 pm 
Offline
4 BBL ''Hyper-Pak''

Joined: Wed Feb 15, 2017 6:57 am
Posts: 27
Car Model*:
Thank you very much, Charlie. This is extremely helpful. I will be following this setup when I install mine.


Top
   
Display posts from previous:  Sort by  
Post new topic  Reply to topic  [ 8 posts ] 

All times are UTC-07:00


Who is online

Users browsing this forum: No registered users and 4 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
Powered by phpBB® Forum Software © phpBB Limited