Slant *        6        Forum
Home Home Home
The Place to Go for Slant Six Info!
Click here to help support the Slant Six Forum upgrade!
It is currently Wed Sep 19, 2018 3:26 pm

All times are UTC-07:00




Post new topic  Reply to topic  [ 5 posts ] 
Author Message
PostPosted: Sat Aug 04, 2018 3:40 am 
Offline
EFI Slant 6

Joined: Wed Jan 14, 2004 9:36 pm
Posts: 293
Car Model*:
I have a 61' Valiant with a later type Carter dual barrel carbie fitted to the slant 6.

The car is driven infrequently, about once a fortnight, and is hard to start as the fuel has drained/evaporated from the carbie. (If I pour a little fuel into the carbie it starts easily).

What can I do do prevent the evaporation from happening?


Top
   
PostPosted: Sat Aug 04, 2018 4:14 am 
Offline
Supercharged

Joined: Thu May 12, 2005 11:50 pm
Posts: 5894
Location: So California
Car Model*: 64 Plymouth Valiant
I put a facet style electric pump next to the tank so I can prime the system. You can keep it off after priming.

_________________
Ed
64 Valiant 225 / 904 / 42:1 manual steering / 9" drum brakes
Image


Top
   
PostPosted: Sat Aug 04, 2018 7:10 am 
Offline
Turbo Slant 6

Joined: Fri Apr 16, 2004 10:50 am
Posts: 640
Location: Stevensville, ON
Car Model*:
If you pour gasoline into an open container and leave for a fortnight, I expect very little of it will remain and remainder probably won't vaporize easily. With a working charcoal canister vapor recovery system, at least some of the vaporized fuel could be recovered but that won't help your starting issue.

You could set up an electric pump to run only on ignition start using relays (get them from Daniel Stern Lighting). I have list of suitable priming pumps here: Vapor Lock. If you add relays, that would be a good time to do the HEI Ignition Upgrade.

_________________
1965 Plymouth Barracuda,
225 engine, Quadrajet, HEI, Dutra Duals, 904 Torqueflite, 2.76:1 axle, Addco front bar
Rods & Relics - Fort Erie, ON / Collector Car Tech


Top
   
PostPosted: Sat Aug 04, 2018 12:31 pm 
Offline
Supercharged
User avatar

Joined: Sun Nov 03, 2002 9:20 pm
Posts: 12102
Location: Fircrest, WA
Car Model*:
Do what the factory did- install a charcoal cannister and a closed air cleaner. This will help contain the petrol vapors a bit, but I don't think any device will retain the vapors for a fortnight (two weeks to us Yanks). Just about any carburetor will evaporate dry if left untouched for that long. The electric fuel pump priming is about the only way to get rid of that problem.


Top
   
PostPosted: Thu Aug 30, 2018 4:46 am 
Offline
EFI Slant 6

Joined: Wed Jan 14, 2004 9:36 pm
Posts: 293
Car Model*:
I now remove the air cleaner and pour a small volume of fuel into the carby vent tube which fills the bowl. My car starts easily now.


Top
   
Display posts from previous:  Sort by  
Post new topic  Reply to topic  [ 5 posts ] 

All times are UTC-07:00


Who is online

Users browsing this forum: No registered users and 2 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
Powered by phpBB® Forum Software © phpBB Limited