Slant Six Forum
https://slantsix.org/forum/

Clay City, KY Official Roll Call 6-8 SEP
https://slantsix.org/forum/viewtopic.php?f=10&t=63965		 Page 4 of 7
Author:  slantzilla [ Tue Sep 03, 2019 3:45 pm ]
Post subject:  Re: Clay City, KY Official Roll Call 6-8 SEP
A Fox body does have a really decent stock suspension under it.
Author:  Rob Simmons [ Tue Sep 03, 2019 5:55 pm ]
Post subject:  Re: Clay City, KY Official Roll Call 6-8 SEP
And factory 4 wheel disc brakes, great aftermarket support...
Author:  Rick Covalt [ Tue Sep 03, 2019 6:07 pm ]
Post subject:  Re: Clay City, KY Official Roll Call 6-8 SEP
You can have "Slant Stang" We can call his the "Mo Stang"
Author:  drgonzo [ Wed Sep 04, 2019 4:53 am ]
Post subject:  Re: Clay City, KY Official Roll Call 6-8 SEP
Mustslant?
Author:  Charrlie_S [ Thu Sep 05, 2019 1:09 am ]
Post subject:  Re: Clay City, KY Official Roll Call 6-8 SEP
Steve Adams and I are going to leave this morning. We got lucky and had no damage from the hurricane, and no power outage. However it did disrupt prep time. I had another truck arranged, but that fell through, when we thought we wouldn't make it. I am using my 88 D-150, which had an overheating problem last time I towed with it. Did some work on it, but haven't tested it with towing. Also about 9 MPG, and almost 800 miles to Clay City. Should be on the road about 7:00 am, and will meet Steve at the first rest stop in Ga. Weather report looks good.
Author:  Rob Simmons [ Thu Sep 05, 2019 5:09 am ]
Post subject:  Re: Clay City, KY Official Roll Call 6-8 SEP
You are hard core Charlie!! Have a safe trip!
Author:  Rob Simmons [ Thu Sep 05, 2019 6:05 am ]
Post subject:  Re: Clay City, KY Official Roll Call 6-8 SEP
Bobby Rogers just posted that all cars must be Mopar bodied and Mopar powered.

Glad we didn’t plan on bringin’ them Slantstangs to this! :shock:
Author:  Greg Ondayko [ Thu Sep 05, 2019 8:49 am ]
Post subject:  Re: Clay City, KY Official Roll Call 6-8 SEP
E30 slant project.

Daimler benz used to own Chrysler for a while.


Greg
Author:  69val6 [ Thu Sep 05, 2019 10:38 am ]
Post subject:  Re: Clay City, KY Official Roll Call 6-8 SEP
You can change my maybe to a yes. I'll be there as long as my tow vehicle gets me there.

Joel Harris
Author:  Rob Simmons [ Thu Sep 05, 2019 10:45 am ]
Post subject:  Re: Clay City, KY Official Roll Call 6-8 SEP
Schweeeet!! :D
Author:  Rob Simmons [ Thu Sep 05, 2019 1:00 pm ]
Post subject:  Re: Clay City, KY Official Roll Call 6-8 SEP
Does anyone coming to Clay City have a good voltage regulator and perhaps the wire connector to it?

Norm is installing a charging system on his Dart. I looked in my junk, but came up short.
Author:  Rick Covalt [ Thu Sep 05, 2019 3:05 pm ]
Post subject:  Re: Clay City, KY Official Roll Call 6-8 SEP
I have a new alternator that has a internal regulator that I'm bringing along.(My spare) Has to have one wire run to it besides the battery wire. They are about $50 from DB electric. If it will help him he is welcome to it. I will look for a Mopar one before I leave too.


I am leaving about 6:30 in the morning.
Author:  69val6 [ Thu Sep 05, 2019 5:28 pm ]
Post subject:  Re: Clay City, KY Official Roll Call 6-8 SEP
Rob are you referring to the 70 and up style regulator?
Author:  Rick Covalt [ Thu Sep 05, 2019 6:09 pm ]
Post subject:  Re: Clay City, KY Official Roll Call 6-8 SEP
Sorry I don't have the factory style plug or VR. Advance auto usually has the newer style in stock.
Author:  Rob Simmons [ Fri Sep 06, 2019 4:45 am ]
Post subject:  Re: Clay City, KY Official Roll Call 6-8 SEP
He is trying to use another type, but not sure it will work. The one I am currently using in the Duster is the later style I believe. I thought I had a spare connector and regulator, but I couldn’t find them.

I plan to upgrade to the kind of alternator Rick uses at some point. Just not there yet. So I can’t give my stuff to Norm yet.
Page 4 of 7 All times are UTC-07:00
Powered by phpBB® Forum Software © phpBB Limited
https://www.phpbb.com/