Slant *        6        Forum
Home Home Home
The Place to Go for Slant Six Info!
Click here to help support the Slant Six Forum!
It is currently Fri Mar 29, 2024 2:39 am

All times are UTC-07:00




Post new topic  Reply to topic  [ 17 posts ]  Go to page 1 2 Next
Author Message
PostPosted: Tue Mar 10, 2009 5:04 am 
Offline
4 BBL ''Hyper-Pak''
User avatar

Joined: Wed Feb 14, 2007 1:51 pm
Posts: 25
Location: Australia, Lakes Entrance
Car Model:
G'day & greetings to all from down under, for those that know us @ GPRS or have bought some of our Slanty gaskets will know we like to look after our fellow mopar owners & bring you the best products we can obtain / make as such our latest release of made in house fibreglass kick panel's is for the Chrysler / Valiant / Dodge A bodies

These kick panels should fit all 1970 thru 1976 Mopar A bodies, Dart, Duster, Demon, Valiant, Scamp, etc, and may fit others Mopar A Body 2-4 door vehicles,

They are directly taken off the factory abs plastic originals numbered 1-2663128-RT & 2-2663129-LT So Please Check your vehicle for application but if it has these part numbers on your originals these will fit it!

69-70 VF-VG Valiant Hardtop Coupe

67-69 Plymouth Barracuda

67-76 Dodge Dart

73-76 Dodge Dart Sport

71-72 Dodge Demon

70-76 Plymouth Duster

72-76 Plymouth Scamp

69-76 Dodge Swinger

67-76 Plymouth Valiant

These are Speaker Pod Kickpanels

No cutting, No hassles & Your Choice of nearly any 6 - 6.5" Speaker, unlike others that dictate you being stuck with an (expensive to upgrade) 4x6" speaker!


Great Sound with minimal effort for your Classic Mopar, and at a Great Price!

Image

Image

Image

Image

Image

These are ready to go for 6" but most 6.5" speakers will fit (please check) as we designed them to fit a universal type 6"- 6.5" speaker between these pods & Quality speakers anyone can have decent sound (from the front where it's supposed to be!) Without cutting ANY metal of your Pride & Joy(s) THESE FIT in using the original mounting holes on both sides.

Installation can be done in as little as 20mins! Each speaker pod has a Precision cut 5" / 127mm hole.. These are Pre cut to save YOU both Hassles & time! (If you need / desire a set without the holes pre cut please let us know!)

These pods are hand laid & are approx 4mm thick they're stronger, & better looking than the originals But just like the originals have been designed with some flex to let them take to odd unforeseen punt!


You can easily color match these to your interior / exterior colour. If black ain't your thing as we can also supply them in White Gelcoat instead of the black.

Cost is $70 USD a pair + $22usd postage / handling to anywhere in the USA / Canada / World (they will be sent wrapped very securely to ensure that they arrive safe & sound for you!) & the usual Air Mail delivery time is 6-10 business days (the longest we've had was 12 to Ontario)

Payments from outside Australia unfortunately can only currently be made via paypal, but with using their E-check system allows you to pay them via US / Canadian postal money order / check etc...

Email: sales@gprsmopars.com

BTW Thanks Doug & Dan & Chuck for the use of the site for the plug..

Cheers Nev & Kevin

Image

_________________
www.gprsmopars.com


Last edited by GPRS_MOPARS on Tue Mar 10, 2009 6:07 pm, edited 1 time in total.

Top
   
 Post subject:
PostPosted: Tue Mar 10, 2009 5:36 am 
Offline
Turbo EFI
User avatar

Joined: Fri Feb 28, 2003 6:55 pm
Posts: 1046
Location: Strasburg, VA
Car Model:
Wish something like this was available or could be constructed to fit the 63-66 A Bodies.


Top
   
 Post subject:
PostPosted: Tue Mar 10, 2009 9:42 am 
Offline
Turbo EFI
User avatar

Joined: Sun Dec 05, 2004 7:20 pm
Posts: 1315
Location: Redwood City, CA
Car Model: 1962 Lancer 770
I am with you on this one Dartman! :D


Top
   
 Post subject:
PostPosted: Tue Mar 10, 2009 9:57 am 
Offline
Board Sponsor & Contributor

Joined: Thu Oct 31, 2002 5:39 pm
Posts: 24233
Location: North America
Car Model:
Yep, a '63-'66 (AP5-VC, in Australia) set would be great — me, I'd like to see a '60-'62 (R & S) set as well!

_________________
一期一会
Too many people who were born on third base actually believe they've hit a triple.

Image


Top
   
 Post subject:
PostPosted: Tue Mar 10, 2009 10:38 am 
Offline
Turbo Slant 6
User avatar

Joined: Wed Apr 30, 2008 8:28 pm
Posts: 645
Location: SFCAUSA
Car Model:
SlantSixDan wrote:
 me, I'd like to see a '60-'62 (R & S) set as well!



DITTO!

_________________
<img src="http://farm4.static.flickr.com/3173/2992308402_5481afb26e_t.jpg">


Top
   
 Post subject:
PostPosted: Tue Mar 10, 2009 3:44 pm 
Offline
4 BBL ''Hyper-Pak''
User avatar

Joined: Wed Feb 14, 2007 1:51 pm
Posts: 25
Location: Australia, Lakes Entrance
Car Model:
stonethk wrote:
SlantSixDan wrote:
 me, I'd like to see a '60-'62 (R & S) set as well!



DITTO!


Guys they are both currently in construction & should be launched by the end of this month we've also got reproduction fibreglass headlight rings for the AP5-6 (63-65) coming out too in the next week..

We basically got tired of seeing butchered door trims & pillars cut up so after seeing there was nothing on the market we've taken the initiative & gone & done / doing them..

So yeah they're coming!! :D

_________________
www.gprsmopars.com


Top
   
 Post subject:
PostPosted: Tue Mar 10, 2009 4:31 pm 
Offline
Supercharged

Joined: Thu May 12, 2005 11:50 pm
Posts: 6291
Location: So California
Car Model: 64 Plymouth Valiant
You may want to make the hole size optional.........

None of the 6.5" speakers I have would fit in a 5" hole flush.

I have 142mm, 137mm and 130 mm(don't have this one, but have the specs because the owners manual has specs for various models)


In the US, common speaker sizes are 5.25, then 6.5; generally don't have 6"

_________________
Ed
64 Valiant 225 / 904 / 42:1 manual steering / 9" drum brakes

8)


Top
   
 Post subject:
PostPosted: Tue Mar 10, 2009 5:00 pm 
Offline
4 BBL ''Hyper-Pak''
User avatar

Joined: Wed Feb 14, 2007 1:51 pm
Posts: 25
Location: Australia, Lakes Entrance
Car Model:
emsvitil wrote:
You may want to make the hole size optional.........

None of the 6.5" speakers I have would fit in a 5" hole flush.

I have 142mm, 137mm and 130 mm(don't have this one, but have the specs because the owners manual has specs for various models)


In the US, common speaker sizes are 5.25, then 6.5; generally don't have 6"


Yeah we thought about this when we did them & figured it's easier for someone to just trim a few mm via jigsaw than to try & cut the hole themselves initially, the problem with cutting holes to suit everyone without it taking a heap of time or having it stuff up with the customer then (rightly so) after our blood..

But I hear ya so we'll look into getting a few more size's re hole saws as the next one up is 5.5" which is smack on 140mm so if we give them the option at least its only a few mm out either way..
Cheers for that.
Nev

_________________
www.gprsmopars.com


Top
   
 Post subject:
PostPosted: Wed Mar 11, 2009 1:27 am 
Offline
Turbo EFI
User avatar

Joined: Sun Dec 05, 2004 7:20 pm
Posts: 1315
Location: Redwood City, CA
Car Model: 1962 Lancer 770
very pleased to hear the 60-62 set will be happening. Finally, I may get some speakers!

THX

MJ


Top
   
 Post subject:
PostPosted: Wed Mar 11, 2009 2:27 am 
Offline
4 BBL ''Hyper-Pak''
User avatar

Joined: Wed Feb 14, 2007 1:51 pm
Posts: 25
Location: Australia, Lakes Entrance
Car Model:
NewLancerMan wrote:
very pleased to hear the 60-62 set will be happening. Finally, I may get some speakers!

THX

MJ


Yes they'll be done & launched asap & may I suggest for both sets of the early ones some slim basket type speakers as there's not alot of room for any real sized magnets but we found out last week Pioneer make a few sets of 42 & 44mm mounting depth (the pods are 38mm) 6.5's & at $50 & $80 usd rrp they're pretty much perfect for these earlier applications where the factory cut out space is at a premium.

http://www.pioneerelectronics.com/PUSA/ ... /TS-G1642R

http://www.pioneerelectronics.com/PUSA/ ... 672R?tab=B

_________________
www.gprsmopars.com


Top
   
 Post subject:
PostPosted: Wed Mar 11, 2009 7:43 am 
Offline
Turbo EFI
User avatar

Joined: Fri Feb 28, 2003 6:55 pm
Posts: 1046
Location: Strasburg, VA
Car Model:
GPRS_MOPARS wrote:
Guys they are both currently in construction & should be launched by the end of this month we've also got reproduction fibreglass headlight rings for the AP5-6 (63-65) coming out too in the next week..

We basically got tired of seeing butchered door trims & pillars cut up so after seeing there was nothing on the market we've taken the initiative & gone & done / doing them..

So yeah they're coming!! :D


Please let us know when they're ready to order!


Top
   
 Post subject:
PostPosted: Mon Nov 02, 2009 8:55 pm 
Offline
Turbo EFI
User avatar

Joined: Sun Dec 05, 2004 7:20 pm
Posts: 1315
Location: Redwood City, CA
Car Model: 1962 Lancer 770
anyone ever find out if these ever came to market in the 60-62 R/S variety?

MJ


Top
   
PostPosted: Thu May 27, 2010 1:18 pm 
Offline
TBI Slant 6
User avatar

Joined: Thu Mar 29, 2007 9:10 pm
Posts: 154
Location: Seaside, Oregon
Car Model: 1962 Dodge Lancer GT Black/Red
I would like to place my vote for the '63 to '66 variety A-body kick panel speaker set. Thx, Ray


Top
   
 Post subject: Lol...
PostPosted: Fri May 28, 2010 6:34 pm 
Offline
Board Sponsor
User avatar

Joined: Tue Oct 29, 2002 8:27 pm
Posts: 9760
Location: Salem, OR
Car Model:
I want to see one with a speaker put in a 1976 A-body, on the drivers
side... :wink:

8)

-D.Idiot


Top
   
 Post subject:
PostPosted: Fri May 28, 2010 7:41 pm 
Offline
Supercharged
User avatar

Joined: Mon Sep 26, 2005 5:09 pm
Posts: 2946
Location: Gilbert, Arizona
Car Model: 1962 Plymouth Valiant Signet
NewLancerMan wrote:
anyone ever find out if these ever came to market in the 60-62 R/S variety?

MJ


I can't find them listed on their website but even if they do have them you will possibly have a problem making them work. The Aussie cars are right hand drive with a center lever E-brake while US cars are left hand drive with a foot pedal operated E-brake. There is very limited space between the kick panel surface and the pedal.

I've toyed with trying to adapt the hand-pull type of later models or installing a lever on the driveline tunnel.

_________________
David Kight
'62 Valiant Signet, White
'98 Dodge Dakota
'06 Jeep Liberty

Growing older is unavoidable but growing up is strictly optional.


Top
   
Display posts from previous:  Sort by  
Post new topic  Reply to topic  [ 17 posts ]  Go to page 1 2 Next

All times are UTC-07:00


Who is online

Users browsing this forum: No registered users and 1 guest


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
Powered by phpBB® Forum Software © phpBB Limited