| Slant Six Forum https://slantsix.org/forum/ |
|
| Standing on the brakes https://slantsix.org/forum/viewtopic.php?f=13&t=61356 |
Page 2 of 2 |
| Author: | Reed [ Sun Jul 16, 2017 3:11 pm ] |
| Post subject: | |
valiant_200 wrote: Upgrade rear ends with 4 1/2" bolt circles are hard to find and impossible to find cheap. ...any rear end I might find would have to come from some other state, incurring horrible shipping fees for a rear end I would have to buy on blind faith. So scratch that.
Have you considered the relatively cheap and easy Ford Explorer rear axle swap? That gives you a 5x4.5 bolt pattern. |
|
| Author: | Joshie225 [ Sun Jul 16, 2017 4:19 pm ] |
| Post subject: | |
10" drums are not a waste of time. If you have them and can bolt them on I don't understand why you would not. Having had several 9" drum cars I was pleasantly surprised when I found my '66 Barracuda had 10" drums. I have one data point on how scarce A body stuff is in Mississippi. In 1994 I couldn't find a door for a Duster anywhere near Biloxi. |
|
| Author: | valiant_200 [ Sun Jul 16, 2017 8:11 pm ] |
| Post subject: | |
SpaceFrank wrote: If you need the swedge-cutting tool, Charlie posted a link to the company that sells them a little while back:
http://slantsix.org/forum/viewtopic.php?t=61171 Thanks. I ordered the tool. With it I can at least get the drum problem resolved. |
|
| Page 2 of 2 | All times are UTC-07:00 |
| Powered by phpBB® Forum Software © phpBB Limited https://www.phpbb.com/ |
|