Hello Sages,

are there sources for the the DCOE to Slant 6 intakes out there other than finding the random one on ebay?


Thanks fort your help!


Greg

_________________
http://www.youtube.com/hyperpack

Call Larry at Clifford. I think I spoke to him several months ago, about it, and they were available.

EDIT: sorry I spoke to him about the dual carb manifold.

_________________
Charrlie_S
65 Valiant 100 2dr post 170 turbo
66 Valiant Signet 225 nitrous
64 Valiant Signet
64 Valiant 4dr 170

Complete setup on thhe Bay now for $2K.

_________________
Official Cookie and Mater Tormentor.

Redline makes one. That is what mine is. The Clifford one is shorter, the Redline is longer by an inch or two. The rear Clifford header on my car will not clear either one. I will need to modify the rear 2 tubes at least. The front 3 are Ok with my Redline.

https://www.redlineauto.com.au/s-221-in ... ?pagenum=6

_________________
2 Mopars come with Spark plug tubes. One is a world class, racing machine. The other is a 426 CI. boat anchor!

12.70 @ 104.6

Sounds Good.

Thanks guys.

Rick - Is that going on your blue car?


Greg

_________________
http://www.youtube.com/hyperpack

There was a Lemons racer in California selling a triple Weber intake of some kind a couple years ago, after his team stopped racing a slant. The thread is long gone and he probably sold it already, but you may want to shoot a PM to the user "mackwagon" on this forum just in case.

_________________
Somehow I ended up owning three 1964 slant six A-bodies. I race one of them.
Escape Velocity Racing

Cool Thank Frank


That info is out of this world!


Greg

_________________
http://www.youtube.com/hyperpack

Note that the Redline intake also has smaller runner cross section than the Clifford. The Redline is more like an Offy 4V runner and the Clifford is, well, about like a Clifford 4V or even a bit bigger.

Lou

_________________
Home of Slant6-powered fun machines

Yes on the Blue car. I'll try and get a picture of the two together.

_________________
2 Mopars come with Spark plug tubes. One is a world class, racing machine. The other is a 426 CI. boat anchor!

12.70 @ 104.6

Hmmm okay, then I suppose that redline is out of the question - I will check with clifford on this.

Thanks for the good Info!

Greg

_________________
http://www.youtube.com/hyperpack

This is, of course, unless Redline or Clifford changed their patterns since I acquired the manifolds I have...

Lou

_________________
Home of Slant6-powered fun machines

True. Thanks Lou.


Greg

_________________
http://www.youtube.com/hyperpack

Does Clifford still build them? They are not on their site.

_________________
2 Mopars come with Spark plug tubes. One is a world class, racing machine. The other is a 426 CI. boat anchor!

12.70 @ 104.6

Not sure - Charrlie Edited his response above as he was speaking about dual carb intake.


Greg

_________________
http://www.youtube.com/hyperpack

saw this stuff at the PRI show,

http://www.rothsport.com/Products/Engin ... ystems.htm

started me thinking how cool it would be to adapt six throttle plates / injectors to a slant.

imagine six individual slide valve injector bodies on a slant.....

the parts shown are targeted for the Porsche market so prices are sky high,

perhaps there is something out there from the Nissan 240 Z or BMW market that would be priced

more reasonable...

_________________
Doo Ron Ron and the Duke of Earl are friends of mine.....
https://www.youtube.com/watch?v=uX8Nj8ABEI8