just got the new cam and lifters for the blower motor, the comp lifters are the straight style not the dumbbell style. are there any oiling flow problems with this style lifter?

Not that I have ever seen. Slants have been getting small block lifters for years. Not even sure you can get dumbbells anymore.

_________________
Official Cookie and Mater Tormentor.

Rockauto has them.

MELLING JB2084
ENGINETECH MT2084
SEALED POWER AT2084

_________________
Ed
64 Valiant 225 / 904 / 42:1 manual steering / 9" drum brakes

thanks, I have order a few cams over the years but it has been awhile since my last one. this is the first time I haven`t use the dumbbell style. the cam is 274degs@ 0.050" with .590" lift and 114degs lobe separation. hoping this will work better with the blown engine.