Slant Six Forum https://slantsix.org/forum/ |
|
U-bolts https://slantsix.org/forum/viewtopic.php?f=20&t=66908 |
Page 1 of 1 |
Author: | valleyguy [ Tue Nov 22, 2022 11:15 am ] |
Post subject: | U-bolts |
Any know of a source for U-bolts that will work on my rear leaf springs/axle, 1963 "Valiant ?? |
Author: | Dart270 [ Tue Nov 22, 2022 11:48 am ] |
Post subject: | Re: U-bolts |
7.25" rear axle? If so, you want 2.5" U-bolts from Summitracing, or any spring supply place like Espo Springs n Things. Firmfeel.com should have them too. Probably parts stores have them or can get them too. If you have an 8.75" or 8.25" axle (only retrofitted later in a 63 car), you need 3" u-bolts. Hope this helps! Lou |
Author: | Greg Ondayko [ Wed Nov 23, 2022 4:09 am ] |
Post subject: | Re: U-bolts |
I put 3" Lowering Blocks on a '62 Valiant that I have. It has the Stock 7 1/4 Axle - I Got some super ridiculous and long u bolts for it from speedway. https://www.speedwaymotors.com/Search?q ... ccessories As Lou said they are fairly ubiquitous... Try any local spring or trailer shop too. they have a machine and can make them to order for you usually while you wait. Safe travels! Greg |
Author: | valleyguy [ Wed Nov 23, 2022 10:37 am ] |
Post subject: | Re: U-bolts |
how can I identify the type axle I have? It is a 9 bolt rear. |
Author: | Dart270 [ Wed Nov 23, 2022 11:02 am ] |
Post subject: | Re: U-bolts |
9 bolts with a sheetmetal cover on the very back of the axle housing would be a 7.25" axle. The axle tubes will be 2.5" in diameter. Lou |
Page 1 of 1 | All times are UTC-07:00 |
Powered by phpBB® Forum Software © phpBB Limited https://www.phpbb.com/ |