Slant *        6        Forum
Home Home Home
The Place to Go for Slant Six Info!
Click here to help support the Slant Six Forum!
It is currently Fri Mar 29, 2024 12:08 am

All times are UTC-07:00




Forum locked  This topic is locked, you cannot edit posts or make further replies.  [ 3 posts ] 
Author Message
PostPosted: Sat Apr 27, 2002 10:04 pm 
Just that, Im still looking for a head gasket, if anyone knows the whereabouts of a new head gasket for my alum. slant six, it would be greatly appreciated, I missed one step when I installed mine, and got what I deserved. ANYONE? (doug dutra has one left, thats not an option :))

do0dlebug19@aol.com


Top
   
PostPosted: Sun Apr 28, 2002 11:06 am 
(User Above) wrote:
: Just that, Im still looking for a head gasket,
: if anyone knows the whereabouts of a new
: head gasket for my alum. slant six, it would
: be greatly appreciated, I missed one step
: when I installed mine, and got what I
: deserved. ANYONE? (doug dutra has one left,
: thats not an option :)


I have some calls into gasket suppliers, looks like I have a lead on some in Canada, need to make some more calls next week.
Grab a Hemmings and call anyone who may carry new old stock gaskets, if they do not have one, ask them if they know who may, follow the leads.

You are one of 3 people currently looking for these and last time I chased these, I found 8 and bought 6, (the other two were overpriced so I passed)

Here are some part numbers for the Alm. Blk SL6 special Head Gasket:

> Mopar # 2128279 - # 2240628 (Full Set)
> McCord - (MC)6530M
> Fel Pro - # 8000sb
> Victor - # 1184
> Fitzgerald - # 0827

I do not have a p/n for Detroit Gasket but they may have done one. Happy Hunting!!
DD


Top
   
PostPosted: Sun Apr 28, 2002 7:47 pm 
Doug, for you being the middle man, I will over pay you for the gasket if you buy it, just let me know a price, and ill fill your pocket too,I just need a gasket, cars dont run good taken apart :) hehehehe I went to the speed shop, and sat there and searched through hemmings, I dont know why, I didnt see any gasket suppliers, I couldnt believe it. If I have bad luck with this gasket, for sure I know the problem lies with to much compression. I have decided to stud the head, should be a little stronger. Ive been talking with a few speed shops around sacramento, not much happening with slant six alum. head gaskets, ive called a few misc. places, they dont even know there was a factory alum. slant six.
(User Above) wrote:
: I have some calls into gasket suppliers, looks
: like I have a lead on some in Canada, need
: to make some more calls next week.
: Grab a Hemmings and call anyone who may carry
: new old stock gaskets, if they do not have
: one, ask them if they know who may, follow
: the leads.
:
: You are one of 3 people currently looking for
: these and last time I chased these, I found
: 8 and bought 6, (the other two were
: overpriced so I passed)
:
: Here are some part numbers for the Alm. Blk SL6
: special Head Gasket: > Mopar # 2128279 -
: # 2240628 (Full Set)
: > McCord - (MC)6530M
: > Fel Pro - # 8000sb
: > Victor - # 1184
: > Fitzgerald - # 0827
:
: I do not have a p/n for Detroit Gasket but they
: may have done one. Happy Hunting!!
: DD



do0dlebug19@aol.com


Top
   
Display posts from previous:  Sort by  
Forum locked  This topic is locked, you cannot edit posts or make further replies.  [ 3 posts ] 

All times are UTC-07:00


Who is online

Users browsing this forum: No registered users and 8 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
Powered by phpBB® Forum Software © phpBB Limited