Slant *        6        Forum
Home Home Home
The Place to Go for Slant Six Info!
Click here to help support the Slant Six Forum upgrade!
It is currently Thu Oct 18, 2018 3:21 pm

All times are UTC-07:00




Post new topic  Reply to topic  [ 5 posts ] 
Author Message
 Post subject: Dual fuel injection
PostPosted: Fri Oct 05, 2018 12:35 pm 
Offline
1 BBL (New)

Joined: Mon Sep 24, 2018 3:07 pm
Posts: 2
Car Model*: Monaco
Has anyone seen or done a dual carb fuel injection? I currently have a dual two barrel setup(not on car yet) was wondering what option u had for fuel delivery


Top
   
 Post subject: Re: Dual fuel injection
PostPosted: Sun Oct 07, 2018 1:28 am 
Offline
TBI Slant 6
User avatar

Joined: Tue Aug 19, 2003 3:52 am
Posts: 153
Location: Helsinki Finland
Car Model*: 1966 2D Dart
The one I have built for /6 is close to "true dual". I have 6 injectors in one group, 2 barrel throttle body and all the feedback for ECU (MAP, O2) has taken from cylinders 1-2-3. 4-5-6 will work like "slave".

So just get 2 identical throttle bodies, sync them and do the control either from front of rear group of cylinders with control system you like to use. I had my own design but the same will work with almost all control systems.

_________________
LL21A6_/6 running with fuel made from biowaste (ethanol).


Top
   
 Post subject: Re: Dual fuel injection
PostPosted: Sun Oct 07, 2018 3:07 am 
Offline
Board Sponsor & Moderator
User avatar

Joined: Mon Oct 21, 2002 11:08 am
Posts: 12596
Location: Blacksburg, VA
Car Model*:
I am not sure what you mean by "dual carb"? Are you talking about throttle bodies or?

Lou

_________________
"You mean you still have a Slant 6 in that thing?"


Top
   
 Post subject: Re: Dual fuel injection
PostPosted: Sun Oct 07, 2018 7:30 am 
Offline
TBI Slant 6
User avatar

Joined: Tue Aug 19, 2003 3:52 am
Posts: 153
Location: Helsinki Finland
Car Model*: 1966 2D Dart
https://www.shop.cliffordperformance.ne ... 01M225.htm Like this I quess.

_________________
LL21A6_/6 running with fuel made from biowaste (ethanol).


Top
   
 Post subject: Re: Dual fuel injection
PostPosted: Sun Oct 07, 2018 10:41 am 
Offline
4 BBL ''Hyper-Pak''
User avatar

Joined: Sat Jan 27, 2018 4:26 pm
Posts: 29
Location: Utah-Idaho border
Car Model*: 1964 Dart 270
I have seen an International Harvester engine with dual tbi. Think the company that did it was Hamilton Fuel Injection.

http://www.binderplanet.com/forums/index.php?threads/dual-1bbls-on-a-stovebolt.120966/

That one is two one barrels, I think its 670 cfm between the two but I'm not positive. You could do two of the 2bbl units but would be overkill for sure.

Brandon

_________________
____________________________

https://www.flickr.com/photos/162600228@N03/


Top
   
Display posts from previous:  Sort by  
Post new topic  Reply to topic  [ 5 posts ] 

All times are UTC-07:00


Who is online

Users browsing this forum: No registered users and 1 guest


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
Powered by phpBB® Forum Software © phpBB Limited