Slant Six Forum https://slantsix.org/forum/ |
|
Ignition Switch Pigtail https://slantsix.org/forum/viewtopic.php?f=28&t=62351 |
Page 1 of 1 |
Author: | '67 Dart 270 [ Wed May 16, 2018 1:23 pm ] |
Post subject: | Ignition Switch Pigtail |
I have a '67 Dart, need the pigtail connector for the ignition switch. I can't seem to source this. I believe my switch is a standard US 50 six blade switch, like this https://www.ebay.com/p/Standard-US50-Re ... 086&chn=ps. I called the vendor that makes wiring harnesses for Year One, they won't share their source for the pigtail (hinted that they make it). Anyone know a source for this pigtail? Anyone have one I can buy (PM me)? Brian |
Author: | emsvitil [ Wed May 16, 2018 6:10 pm ] |
Post subject: | Re: Ignition Switch Pigtail |
You could just use 6 female spade connectors...……………. |
Author: | Charrlie_S [ Thu May 17, 2018 3:27 am ] |
Post subject: | Re: Ignition Switch Pigtail |
Didn't Dan just post about that connector, not that long ago? Can't seem to find it with the search. Found the post. It was for the headlight sw connector, not the ign sw. |
Author: | '67 Dart 270 [ Thu May 17, 2018 8:09 am ] |
Post subject: | Re: Ignition Switch Pigtail |
Right, I'm now looking for the ignition pigtail. I'm surprised nobody sells it. Yes, I have currently have female connectors on there. The old connector was melted so badly at one point the previous owner had cut it apart, there was only a piece of it left when I bought the car. If anyone can source one, let me know. thanks all. Brian |
Author: | '67 Dart 270 [ Thu May 17, 2018 8:49 am ] |
Post subject: | Re: Ignition Switch Pigtail |
This appears to be a source, fyi. https://www.ebay.com/itm/REPAIR-IGNITIO ... SwDKtY1yZK b |
Page 1 of 1 | All times are UTC-07:00 |
Powered by phpBB® Forum Software © phpBB Limited https://www.phpbb.com/ |