Slant *        6        Forum
Home Home Home
The Place to Go for Slant Six Info!
Click here to help support the Slant Six Forum upgrade!
It is currently Sun Jul 22, 2018 8:57 pm

All times are UTC-07:00




Post new topic  Reply to topic  [ 7 posts ] 
Author Message
 Post subject: HX35 Turbo Placement
PostPosted: Thu Apr 28, 2016 8:21 pm 
Offline
3 Deuce Webber

Joined: Mon Apr 19, 2004 8:45 pm
Posts: 87
Location: Gaston, OR
Car Model*:
I now have an HX35, so where do you put it? I saw Pro Cycle cut down the stock manifold and welded a flange to it and put the turbo right next to the block. That seems like a decent place for it. Can I keep the stock oil dip stick with it there? Are there any other clearance issues with it located there?

For those that are using the HX35, what did you do for your downpipe? Did you cut off the stock elbow and weld on a v band flange?


Top
   
 Post subject:
PostPosted: Thu Apr 28, 2016 8:45 pm 
Offline
3 Deuce Webber

Joined: Mon Apr 19, 2004 8:45 pm
Posts: 87
Location: Gaston, OR
Car Model*:
I have the 7 blade HX35W. How does one reduce the boost down to the 8-15psi range? I am going to be running the MS3-Pro so I have boost control available but I'm not sure what's needed on the hardware side.


Top
   
 Post subject:
PostPosted: Fri Apr 29, 2016 7:37 pm 
Offline
Turbo Slant 6
User avatar

Joined: Fri Apr 27, 2007 5:50 pm
Posts: 745
Car Model*:
<img src="http://i125.photobucket.com/albums/p79/weesers1/Mobile%20Uploads/20141221_113629_zpso1igjljt.jpg" border="0" alt=" photo 20141221_113629_zpso1igjljt.jpg"/>

watch out if you use an internal wastegate. mine barely clears the intake.

<img src="http://i125.photobucket.com/albums/p79/weesers1/IMG_20140814_134314_098_zps2c67548a.jpg" border="0" alt=" photo IMG_20140814_134314_098_zps2c67548a.jpg"/>

used 3" flex pipe.

no idea what you would need to control boost using ms3.


Top
   
 Post subject:
PostPosted: Sat Apr 30, 2016 12:04 am 
Offline
3 Deuce Webber

Joined: Mon Apr 19, 2004 8:45 pm
Posts: 87
Location: Gaston, OR
Car Model*:
What blow off valve are you using?


Top
   
 Post subject:
PostPosted: Sat Apr 30, 2016 5:13 pm 
Offline
Turbo Slant 6
User avatar

Joined: Fri Apr 27, 2007 5:50 pm
Posts: 745
Car Model*:
that is a snyapse. i was running an ebay bov. that worked fine. made the fast and furious whistle noises. lol. the synapse is a much better unit though.


Top
   
 Post subject:
PostPosted: Thu May 19, 2016 10:14 am 
Offline
3 Deuce Webber
User avatar

Joined: Tue Oct 14, 2008 8:39 pm
Posts: 56
Location: littlestown pa
Car Model*:
I made my own manifold

_________________
Image


Top
   
 Post subject:
PostPosted: Tue Jan 24, 2017 8:08 am 
Offline
4 BBL ''Hyper-Pak''

Joined: Mon Nov 24, 2014 6:13 am
Posts: 37
Location: Pine bush newyork
Car Model*: 72 valiant
Hi
I too am going to run a Holset hx35. How did you resolve the wastegate issue? How are you limiting to under 15 psi?
Reading, collecting parts, waiting.
Russ


Top
   
Display posts from previous:  Sort by  
Post new topic  Reply to topic  [ 7 posts ] 

All times are UTC-07:00


Who is online

Users browsing this forum: No registered users and 3 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
Powered by phpBB® Forum Software © phpBB Limited