Slant *        6        Forum
Home Home Home
The Place to Go for Slant Six Info!
Click here to help support the Slant Six Forum!
It is currently Thu Mar 28, 2024 1:12 am

All times are UTC-07:00




Post new topic  Reply to topic  [ 10 posts ] 
Author Message
PostPosted: Fri Apr 28, 2017 2:30 pm 
Offline
Site Admin
User avatar

Joined: Sat Oct 12, 2002 12:57 am
Posts: 1359
Location: Grass Valley, Ca.
Car Model: '63 Dodge Dart GT Convertible
Is anyone interested in making a laser-printed glove box for these models? All you can buy is the '63 box, which is folded, not molded. You have to drill out the dash to install it.

_________________
Chuck Rivers, Webmaster
Image Image Image Image


Top
   
 Post subject:
PostPosted: Fri Apr 28, 2017 3:30 pm 
Offline
3 Deuce Weber
User avatar

Joined: Mon Jan 16, 2006 7:45 pm
Posts: 81
Location: Washington
Car Model:
Yes, definitely; and I would take two.
Thanks.
Fred


Top
   
 Post subject:
PostPosted: Fri Apr 28, 2017 8:17 pm 
Offline
Board Sponsor & Contributor

Joined: Thu Oct 31, 2002 5:39 pm
Posts: 24233
Location: North America
Car Model:
The thread you're after is here.

_________________
一期一会
Too many people who were born on third base actually believe they've hit a triple.

Image


Top
   
 Post subject:
PostPosted: Sat Apr 29, 2017 5:18 am 
Offline
Supercharged
User avatar

Joined: Sat Nov 27, 2004 8:03 pm
Posts: 8977
Location: IRWIN PA
Car Model:
Looks like some quality work there Dan


Chuck, follow the link and contact the fellow.

Greg

_________________
http://www.youtube.com/hyperpack
Image


Top
   
PostPosted: Sat Aug 26, 2017 1:38 pm 
Offline
4 BBL ''Hyper-Pak''

Joined: Sat Aug 20, 2011 8:32 pm
Posts: 27
Car Model:
Chuck wrote:
Is anyone interested in making a laser-printed glove box for these models? All you can buy is the '63 box, which is folded, not molded. You have to drill out the dash to install it.


I'm the one in the link as "66dvert" over on the other forum

they are not laser printer or even 3d printed(though I have thought about it for 3dprinting) Casting a good part was near impossible due to the surface tension and sticking to the inner and outer silicone mold even after multiple coats of mold release agent.

I am in the process of making them right now out of ABS. These simple boxes "should" be easy, but they are not! I can make a lot of other parts like kick panels, top convertible rear side panel pieces a lot easier than this "simple box" The vacu-forming process there are a few issued to deal with that I am having a bit of trouble fixing to my satisfaction. Can I make the boxes? Yes for sure is it as good as I would like? NO! I'm currently working on the webbing issue and having to go to a thicker ABS sheet to get a good draw. I will post on both sites after I am sure I can do a run of good (to my satisfaction) glove boxes.

https://www.facebook.com/media/set/?set=a.1542003356121262.1073741827.1537274853260779&type=1&l=b17e2f8c3e


Top
   
 Post subject:
PostPosted: Sat Aug 26, 2017 2:43 pm 
Offline
Board Sponsor & Contributor

Joined: Thu Oct 31, 2002 5:39 pm
Posts: 24233
Location: North America
Car Model:
Not all of us are on Fecebook; will you please consider hosting your pics somewhere that doesn't require membership/log-in?

(matter of fact, I have fecebook.com blocked at my network router and with 127.0.0.1 redirects in my /hosts file; I don't want their grubby little mits anywhere near my ѕhit.)

_________________
一期一会
Too many people who were born on third base actually believe they've hit a triple.

Image


Top
   
 Post subject:
PostPosted: Sat Aug 26, 2017 8:00 pm 
Offline
4 BBL ''Hyper-Pak''

Joined: Sat Aug 20, 2011 8:32 pm
Posts: 27
Car Model:
SlantSixDan wrote:
Not all of us are on Fecebook; will you please consider hosting your pics somewhere that doesn't require membership/log-in?

(matter of fact, I have fecebook.com blocked at my network router and with 127.0.0.1 redirects in my /hosts file; I don't want their grubby little mits anywhere near my ѕhit.)


sure .ummm what place is pretty good and free? I haven't looked at any places but it'll be easy to upload em to a new place.


Top
   
 Post subject:
PostPosted: Sat Aug 26, 2017 8:33 pm 
Offline
Board Sponsor & Contributor

Joined: Thu Oct 31, 2002 5:39 pm
Posts: 24233
Location: North America
Car Model:
Flickr works, for one. So does Dropbox.

_________________
一期一会
Too many people who were born on third base actually believe they've hit a triple.

Image


Top
   
PostPosted: Sat Aug 26, 2017 9:41 pm 
Offline
4 BBL ''Hyper-Pak''

Joined: Sat Aug 20, 2011 8:32 pm
Posts: 27
Car Model:
here is a link to flickr
https://www.flickr.com/gp/66dvert/8Y0VcW
let me know if it works


Top
   
 Post subject:
PostPosted: Sun Aug 27, 2017 8:14 am 
Offline
Turbo EFI
User avatar

Joined: Fri Feb 28, 2003 6:55 pm
Posts: 1046
Location: Strasburg, VA
Car Model:
It works!

_________________
65 Dart station wagon slant 6 - now under construction
47 Dodge Custom 4 Door sedan
87 D100 Short Bed slant 6

Retired USAF 1966-1986
Retired US Postal Service 2004-2014


Top
   
Display posts from previous:  Sort by  
Post new topic  Reply to topic  [ 10 posts ] 

All times are UTC-07:00


Who is online

Users browsing this forum: No registered users and 3 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
Powered by phpBB® Forum Software © phpBB Limited