Slant *        6        Forum
Home Home Home
The Place to Go for Slant Six Info!
Click here to help support the Slant Six Forum!
It is currently Thu Mar 28, 2024 1:24 am

All times are UTC-07:00




Post new topic  Reply to topic  [ 1220 posts ]  Go to page Previous 169 70 71 72 7382 Next
Author Message
PostPosted: Mon May 07, 2018 6:18 pm 
Offline
Board Sponsor & SL6 Racer

Joined: Wed Oct 23, 2002 7:57 pm
Posts: 8283
Location: Waynesboro, Pa.
Car Model: 65 Valiant 2Dr Post
Great news Greg! You have done a lot of work in the last few weeks!

Rick :D :D

_________________
2 Mopars come with Spark plug tubes. One is a world class, racing machine. The other is a 426 CI. boat anchor!
Image
12.70 @ 104.6
Image


Top
   
PostPosted: Mon May 07, 2018 7:51 pm 
Offline
Supercharged
User avatar

Joined: Sat Nov 27, 2004 8:03 pm
Posts: 8977
Location: IRWIN PA
Car Model:
Rick Covalt wrote:
Great news Greg! You have done a lot of work in the last few weeks!

Rick :D :D



Thanks, We'll see if it fires and if it has any leaks..

Greg

_________________
http://www.youtube.com/hyperpack
Image


Top
   
PostPosted: Thu May 17, 2018 4:30 am 
Offline
Supercharged
User avatar

Joined: Sat Nov 27, 2004 8:03 pm
Posts: 8977
Location: IRWIN PA
Car Model:
5/17/18

This has to be the worst Build I have ever done - I must be getting senile as I tried to fire the thing up over a week ago.. Lots of crankity crankity crankity but it would only pop and wheeze..

I got to thinking about the problem and realized that I centerlined the Cam on #1 Exhaust rather than intake.

Well that will cause your engine not to fire.

Other things that went wrong..

-Massive Oil leak on Pan rail / Scraper
-Water Pump Leak
- Smith Brothers sent 11 out of 12 screws with threads
- Discovered 36-1 trigger wheel was cracked and wiggily; tried to weld it - Turned it into scrap, so I bought a Holley 60-2 Wheel and futz'd with some settings in tuner studio.. got that working.

Old DIYAutotune 36-1 6 3/4" Wheel - They start with 1/2" center hole - enlarged it to 1" with a notch for keyway. - it cracked along the egde where it was clamped by spacers. Tried to weld it which made it garbage.
Image

Comparison of New and old wheel - Holley 60-2 already had a 1" center hole - perfect for my Moroso SBC Mandrel drive which uses 1" Mandrel with keyway.
Image


Image


Image

It's nice to have access to the Cam Gear and chain when you cant time the cam correclty on the engine stand :-o
Image


Image

We'll See if engine build #3 with new Head, Block, Crank will be any better then Engine #1 or #2.

Greg
Greg

_________________
http://www.youtube.com/hyperpack
Image


Top
   
PostPosted: Thu May 17, 2018 6:34 am 
Offline
Board Sponsor & SL6 Racer
User avatar

Joined: Fri Nov 08, 2002 4:48 pm
Posts: 5835
Location: Burton BC canada
Car Model:
<flog> will bring results....


Top
   
PostPosted: Thu May 17, 2018 7:15 am 
Offline
Board Sponsor & Moderator
User avatar

Joined: Mon Oct 21, 2002 11:08 am
Posts: 16447
Location: Blacksburg, VA
Car Model:
We all go through cycles of doofyness. You got it goin', which is the important part! Persistence solves almost everything.

Lou

_________________
Home of Slant6-powered fun machines


Top
   
PostPosted: Thu May 17, 2018 3:44 pm 
Offline
Board Sponsor & SL6 Racer

Joined: Wed Oct 23, 2002 7:57 pm
Posts: 8283
Location: Waynesboro, Pa.
Car Model: 65 Valiant 2Dr Post
Quote:
realized that I centerlined the Cam on #1 Exhaust rather than intake.


Sounds like we may be brothers!!! :D :D

_________________
2 Mopars come with Spark plug tubes. One is a world class, racing machine. The other is a 426 CI. boat anchor!
Image
12.70 @ 104.6
Image


Top
   
PostPosted: Fri May 18, 2018 8:09 am 
Offline
Supercharged
User avatar

Joined: Sat Nov 27, 2004 8:03 pm
Posts: 8977
Location: IRWIN PA
Car Model:
Rick Covalt wrote:
Sounds like we may be brothers!!! :D :D


I thought you already had one of those?

Maybe More Like Ryan's Brother?

Does that mean I am an Honorary Covalt Clan Member?
I have camped at many Covalt facilities, drove a Covalt Rent a racer, and rented storage for vehicles. o I even Invited you to a party at my House once.

:-D

Greg

_________________
http://www.youtube.com/hyperpack
Image


Top
   
PostPosted: Thu Aug 09, 2018 12:00 am 
Offline
EFI Slant 6

Joined: Fri Feb 15, 2008 8:17 am
Posts: 329
Location: Seymour, TN
Car Model: 1965 Dart 270 w/ 66 Valiant front clip
I may have missed it but...What radiator are you using and did you weigh it?

_________________
Michael Glass. Mopar stuff and some rusty Mopar stuff!
1965 Dodge Dart with 66 Valiant front clip. Other stuff...


Top
   
PostPosted: Thu Aug 09, 2018 3:55 am 
Offline
Supercharged
User avatar

Joined: Sat Nov 27, 2004 8:03 pm
Posts: 8977
Location: IRWIN PA
Car Model:
NCDemon1971 wrote:
I may have missed it but...What radiator are you using and did you weigh it?



I can get that Info to you.

I dont believe it Have the weight,but if I do It might be in the first 9 or so pages of the post.

I was going to order another one of these rad's for the 64 Dart.


Greg

_________________
http://www.youtube.com/hyperpack
Image


Top
   
PostPosted: Thu Aug 09, 2018 12:23 pm 
Offline
Supercharged
User avatar

Joined: Sat Nov 27, 2004 8:03 pm
Posts: 8977
Location: IRWIN PA
Car Model:
Ruster Radiator is summit racing Part# 380645 - Universal, AL, nice and small, Works well, No Built in Drain or petcock however.

Not sure on Weight - Maybe call summit customer service and ask about the weight.


Greg

_________________
http://www.youtube.com/hyperpack
Image


Top
   
PostPosted: Thu Aug 09, 2018 5:18 pm 
Offline
EFI Slant 6

Joined: Fri Feb 15, 2008 8:17 am
Posts: 329
Location: Seymour, TN
Car Model: 1965 Dart 270 w/ 66 Valiant front clip
Thanks Greg, I will see what they tell me.

_________________
Michael Glass. Mopar stuff and some rusty Mopar stuff!
1965 Dodge Dart with 66 Valiant front clip. Other stuff...


Top
   
PostPosted: Fri Aug 24, 2018 7:22 pm 
Offline
Supercharged
User avatar

Joined: Sat Nov 27, 2004 8:03 pm
Posts: 8977
Location: IRWIN PA
Car Model:
Looks like I finally got the car sorted out for this year.
Megasquirt did not play nice with 60-2 trigger wheel no matter what tuning tricks that I tried..
I finally gave up and got a 36-1 trigger wheel from holley that had a 1" hole in the middle as it is skookum and easily mounts to the moroso mandrel on the front of the balancer.

Once that was sorted I started to have oil pressure problems... pressure going down with rising RPM's. That turned out to be a crushed down -10AN supply line from block to oil pump.

Got that fixed with a new section of braided hose as well as an inner spring to help keep the hose getting sucked in on the inside from the oil pump.

Car runs but .2 to .4 slower than old motor so far..
Maybe it needs to break in and get more passes before it's fast?

Its good to have a working race car again... one that dosent have a gallon of water mixed in the oil sump.

See you guys at Clay City.

_________________
http://www.youtube.com/hyperpack
Image


Top
   
PostPosted: Sat Aug 25, 2018 2:26 am 
Offline
Board Sponsor & Moderator
User avatar

Joined: Mon Oct 21, 2002 11:08 am
Posts: 16447
Location: Blacksburg, VA
Car Model:
Super! Glad to hear it, Greg. The Slant Six World Forever Nationals would not be the same without you and Ruster in attendance.

2 weeks to go...

Lou

_________________
Home of Slant6-powered fun machines


Top
   
PostPosted: Mon Aug 27, 2018 1:03 pm 
Offline
SL6 Racer & Moderator
User avatar

Joined: Wed Jan 29, 2003 4:42 am
Posts: 8700
Location: Cox’s Creek, KY
Car Model: More cars than sense...
Very good to hear Greg! Ruster ROCKS!! :D

_________________
Rob

I’m Mater
The Kentucky Poser

Image


Top
   
PostPosted: Wed Aug 29, 2018 7:31 pm 
Offline
Board Sponsor & Moderator
User avatar

Joined: Thu Oct 17, 2002 7:27 pm
Posts: 14117
Location: Park Forest, Illinoisy
Car Model: 68 Valiant
Congrats Greg! :D

_________________
Official Cookie and Mater Tormentor.


Top
   
Display posts from previous:  Sort by  
Post new topic  Reply to topic  [ 1220 posts ]  Go to page Previous 169 70 71 72 7382 Next

All times are UTC-07:00


Who is online

Users browsing this forum: No registered users and 11 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
cron
Powered by phpBB® Forum Software © phpBB Limited