Hello All,
I am in the process of bringing my 1981 dodge d-150 back to life . It has a 225 with a NP 2500 5 speed transmission.

It seems I am missing the bell house starter seal .

Does anyone have one they would part with ?

Where could I find one ?

Could you make a cardboard template of one you would not sell ?

Thanks for the help,this fine old truck deserves to ride again!

Unclebear [Barry Lundgren ]

This one ought to do the job for you.

_________________
一期一会
Too many people who were born on third base actually believe they've hit a triple.

They are mostly the same from say '62 possibly earlier to '93 in most passenger cars and light trucks, regardless of engine family R/G, A/ LA , or B/RB.
I am sure you can find one at a local car recycler too.

_________________
http://www.youtube.com/hyperpack

Thank You . It seems I am also missing the clutch housing or bell housing dust seal .
I believe it is a triangular piece of sheet steel on the bottom of the engine.
It was almost 40 years ago when I pulled and rebuilt the engine so the memory is a little hazy .
I paid someone to pull the engine to repair a bad syncro ring and their work left something to be desired...
This is a standard transmission so I hope it is not a super rare part .

I have one, send me a private message and we can work out the details.

_________________
Hyper_pak

Here are the two types of starter shields I have.
One with the pen pointing to it has more steel on the right side and a dimple to clear some item.
One on the left is a standard passenger car.

_________________
Hyper_pak

Well ,one out of two is not a bad start .
Thanks slantsix dan for the link ,looks like a really nice resource .
Thanks Hyper pak ,I will pm you now