Slant Six Forum
https://slantsix.org/forum/

distributor springs
https://slantsix.org/forum/viewtopic.php?f=8&t=52750		 Page 4 of 5
Author:  Polara1974 [ Mon Feb 23, 2015 5:23 pm ]
Post subject: 
Hi Bigslantsixfan. Will you ship to Argentina? I need two sets .. or maybe three ..
Can you get me a quote on shipping? Regards Martin
Author:  bigslant6fan [ Sun Mar 01, 2015 7:08 pm ]
Post subject:  springs
I've had several people ask me questions this week so I'll try to answer them:
1.My kit will not convert "lean burn" distributors to conventional types with mechanical advance. If your car has lean burn, you need a different distributor, carburetor, and the ignition system needs a major conversion.

2. My chart includes advance rates for one spring in case you want to keep the OEM long looped spring. In this case, the advance rate will follow the profile of the lighter spring, until the slack in long looped spring is used up.
Author:  DonPal [ Wed May 20, 2015 8:12 am ]
Post subject:  Sign Me Up Again
PayPal sent for another kit.

Thanks...Don
Author:  octagon5 [ Sat Jun 20, 2015 12:59 pm ]
Post subject: 
i would like to buy a kit.
Thanks.
Author:  octagon5 [ Sun Jun 21, 2015 9:04 pm ]
Post subject: 
Tried to send funds to your e-mail,but it asked name address?
Author:  bigslant6fan [ Sun Jun 28, 2015 9:04 pm ]
Post subject:  .
Heads up folks, there seems to be a scammer with an e-mail and PP account similar to mine. My addy is ; bigslant6fan@yahoo.com Please note that it is the number "6" and NOT the word "six"
Author:  octagon5 [ Sat Aug 08, 2015 4:05 pm ]
Post subject:  Distributor spring kit
paypal sent for distributor spring kit. will pm shipping addy. Thanks
Ken
Author:  Saint 6 [ Mon Aug 10, 2015 8:51 pm ]
Post subject: 
Have sent $55 for two sets via Paypal. If need be, PM me or call the phone# in the paypal notes. Thanks & Regards...
Author:  curmudgeon [ Thu Sep 08, 2016 5:21 am ]
Post subject: 
PM sent
Author:  bigslant6fan [ Sat Sep 10, 2016 10:58 am ]
Post subject:  Update on shipping charges Sept. 10 2016
Shipping in the continental US. is $4.75. Shipping outside the US will cost $9.50 (Ouch!) to most Countries by USPS. Additional shipping for multiple kits will be 50 cents in the 48 state US.
Author:  ValiantBoyWonder [ Wed Nov 15, 2017 5:02 am ]
Post subject:  Re: distributor springs
payment sent! thank you sir.
Author:  71dodgedart [ Mon Feb 05, 2018 9:34 am ]
Post subject:  Re: distributor springs
Hi BigSlant6Fan,

I had sent a payment for the Slant 6 distributor spring kit, (Jan 4th 2018) but since I forgot to add my address (my bad) you refunded me the payment on Jan 11th 2018.

I re-sent another payment with extra tip added that same day (of $35 total) with my home address this time, and added the info in the PayPal note area (like I was supposed to do the first time).

I am in no huge rush, I just wanted to make sure I didn't get overlooked or forgotten about. :)

Also thank you for all your help & knowledge you have shared on the forums.

- Tony
Author:  71dodgedart [ Wed Feb 21, 2018 7:58 pm ]
Post subject:  Re: distributor springs
71dodgedart wrote:
Hi BigSlant6Fan,

I had sent a payment for the Slant 6 distributor spring kit, (Jan 4th 2018) but since I forgot to add my address (my bad) you refunded me the payment on Jan 11th 2018.

I re-sent another payment with extra tip added that same day (of $35 total) with my home address this time, and added the info in the PayPal note area (like I was supposed to do the first time).

I am in no huge rush, I just wanted to make sure I didn't get overlooked or forgotten about. :)

Also thank you for all your help & knowledge you have shared on the forums.

- Tony


I received my distributor springs just wanted to say thanks!
Author:  shadango [ Fri Mar 02, 2018 6:11 am ]
Post subject:  Re: distributor springs
In the original ad it says these fit "most mopar distributors..." --- should fit our slant AND my 318 Cuda?

How hard is it to change out springs etc?
Author:  DusterIdiot [ Fri Mar 02, 2018 7:02 pm ]
Post subject:  Re: distributor springs
Quote:
should fit our slant AND my 318 Cuda?


If they are uniform springs and not the large loop style on the EI distributors they will fit the standard G,A, and B engine distributors....

The complication occurs when you use a long loop spring from a V-8 distributor that had an L17 governor slot, and the new governor is L9 to 15... (so no spring tension on the heavy spring on the advance which will act like no spring at all)...

If I remember right these are non long looped springs and will work for your applications.

Article to tear down distributor to refurbish or change springs is HERE
Page 4 of 5 All times are UTC-07:00
Powered by phpBB® Forum Software © phpBB Limited
https://www.phpbb.com/