Slant Six Forum
http://slantsix.org/forum/

Bunch of odds & ends for sale.
http://slantsix.org/forum/viewtopic.php?f=8&t=63306
Page 1 of 2

Author:  Old6rodder [ Wed Feb 13, 2019 7:44 pm ]
Post subject:  Bunch of odds & ends for sale.

Howdy, Gentlemen, I'm clearing out some space under my house in order to do some work on the underside of the floor. To that end I have a bunch of (mostly stock **) parts I've relegated to that space over the years. They're now relocated 20' from the curb, and'll take that "final walk" to the curb for the metal scroungers in a couple weeks if they're still here.

** The axle on the left's been re-lugged to 4.5" by me, the tank's from an unknown tractor, the sideways BBD manifold's iron & by someone else (bolted & epoxied), the cranks'll need re-ground, the 904s all are said to be operable by their POs, and the heads come with rockers if you want'em.

Here they are, I'll be happy to answer any questions here on the thread.

Image

Image

Image

Image

Image

Image

Image

Image

Image

Image

Image

Image

Image

Author:  Rick Covalt [ Thu Feb 14, 2019 3:10 am ]
Post subject:  Re: Bunch of odds & ends for sale.

How much for the Clifford Valve cover?

Author:  Charrlie_S [ Thu Feb 14, 2019 3:17 am ]
Post subject:  Re: Bunch of odds & ends for sale.

Yeah, how much?
Any of the oil pans for 66 or older "A" bodies?

Author:  Rob Simmons [ Thu Feb 14, 2019 4:39 am ]
Post subject:  Re: Bunch of odds & ends for sale.

Dang. Didn’t see the Clifford. :(

Author:  Dart270 [ Thu Feb 14, 2019 6:01 am ]
Post subject:  Re: Bunch of odds & ends for sale.

Man, lots of nice stuff there. Hope you get some takers.

Looks like the right 3 oilpans are 63-66 A-body.

Rob will buy a Slant 6 pickup or B van in LA and load the whole lot and drive back to KY... I might join him!

Lou

Author:  and739 [ Thu Feb 14, 2019 6:12 am ]
Post subject:  Re: Bunch of odds & ends for sale.

Dart270 wrote:
Man, lots of nice stuff there. Hope you get some takers.

Looks like the right 3 oilpans are 63-66 A-body.

Rob will buy a Slant 6 pickup or B van in LA and load the whole lot and drive back to KY... I might join him!

Lou


If that happens I'd like to get in on the action. I could use a transmission for the Sandman project. Of course you guys are welcome to stay at the and739 B&B on your way through.

Author:  Dart270 [ Thu Feb 14, 2019 8:19 am ]
Post subject:  Re: Bunch of odds & ends for sale.

I was joking with Rob and the board. Crazier things have happened, however...

Lou

Author:  and739 [ Thu Feb 14, 2019 8:28 am ]
Post subject:  Re: Bunch of odds & ends for sale.

Yeah, that's what I figured. I get the feeling Rob can't pass up a deal. :lol:
But like you say "Crazier things have happened, however..."

Author:  Rob Simmons [ Thu Feb 14, 2019 8:48 am ]
Post subject:  Re: Bunch of odds & ends for sale.

Hey! I resemble that remark! :lol:

I like road trips... :D

viewtopic.php?f=12&t=48776&hilit=Kalifornia

Author:  Old6rodder [ Thu Feb 14, 2019 9:28 am ]
Post subject:  Re: Bunch of odds & ends for sale.

Wow, that was quick. Guys, the Clifford now has a waiting list on my PMs. I'll keep you abreast of its status.

Charlie, I'll look up the pans, and let you know. I'd think Florida would have something like that a lot closer though.

Gentlemen, here's something more in line with my typical butchery as well, rather than the stock things I usually just stash. I have a pair of 7.25" axles & drums that I turned plates for, re-lugged & drilled for early Ford 5 on 5.5" stepped hub pattern. I ran a pair of 16" Kelsey wires on the 'Brick back when I first built'er as the Barn Job. These axles don't fit the 8" Ford in her now, so are on the block for anyone else as weird as I am. :lol:

Slanted T bucket anyone? :twisted:

Image

Author:  rheisten [ Fri Feb 15, 2019 11:06 am ]
Post subject:  Re: Bunch of odds & ends for sale.

we can make a list rob will go by the lot and we can pick on his way back

Author:  lecawinger [ Sat Feb 16, 2019 12:07 am ]
Post subject:  Re: Bunch of odds & ends for sale.

I'd be interested in finding out what you want for the 2 BBL intake manifold next to all the oil pans?

Author:  Rob Simmons [ Sat Feb 16, 2019 10:17 am ]
Post subject:  Re: Bunch of odds & ends for sale.

I believe he also has a Super Six set up as well. Closest to the transmissions and exhaust manifolds. Even has a carb on it.

Author:  Old6rodder [ Sat Feb 16, 2019 10:40 am ]
Post subject:  Re: Bunch of odds & ends for sale.

Gentlemen, the Clifford was requested nearly immediately. I'll keep a list in order pending sale, and keep you all updated.

Charlie, I don't know what oil pans go on what cars, so ......
Per this photo I have 1-#6, 1-#5, 1-#3, 1-#1, and 2-#1s with the drain plug offset toward the distributor (alias "short") side.
Image

Lecawinger, that one's iron, studded for a sideways BBD, and looks to be good. May want its JB Weld redone at some point in the future. I'd like $50.00 for it. Where are you?

Yes, the one in the corner's a factory Super Six on an iron manifold. Has no linkages.

Author:  Old6rodder [ Sat Feb 16, 2019 11:05 am ]
Post subject:  Re: Bunch of odds & ends for sale.

Good grief. In my "archeologic" endeavors I just (re)discovered a pair of two door Toad doors I'd squirreled away for a project that I had to relinquish some time ago. They're in great shape, minus their interior panels.

No telling what this "dig"ll turn up next. :lol:

Page 1 of 2 All times are UTC-07:00
Powered by phpBB® Forum Software © phpBB Limited
https://www.phpbb.com/