Hey guys I need to get a harmonic balancer bolt for my 66 / with a 170cid. Anyone know what the head size is on that puppy?

I want to limit all the different tools I have to hump in to the boneyard this week

_________________
-76 Cordoba, 360 4bbl
-68 Valiant, 273 2bbl
-67 Dart /6 4bbl, Leaning Tower of Power!!!

You can buy one at the hardware store. 3/4" fine thread 1-1/4" long.

Head size should be 1-1/8".

_________________
Official Cookie and Mater Tormentor.

As you'll find, Slants usually didn't come with a bolt to hold the ballancer. in place. It is a press fit. One can be added, I'm sure someone else will give the specs on size, thread pitch and length. I don't remember off hand.

_________________
There are 3 things that will live forever, cockroaches, Keith Richards, and Slant Six Dusters !!!

http://s4.photobucket.com/albums/y128/slantasaurus/

take a look around

Ahhh, Haaaa! That may explain the absence of the bolt on my car

Thank you,

good thing I hav a 1-1/8 socket too. I guess I'll go ahead and put one on anyhow if it wasn't any big dea.

_________________
-76 Cordoba, 360 4bbl
-68 Valiant, 273 2bbl
-67 Dart /6 4bbl, Leaning Tower of Power!!!

Nice looking Valiant there! Owned it long? Like the 'Doba in the background. Nice cars.

-James

_________________

\


Thank you James. Just PMed ya.

Chris

_________________
-76 Cordoba, 360 4bbl
-68 Valiant, 273 2bbl
-67 Dart /6 4bbl, Leaning Tower of Power!!!