Hi,

The glass on my 1967 Barracuda driver side front window wobbles back and forth and falls out of track. There is a small round hole on the top right corner of the glass (if viewing from inside) by the beam for the pivoting vent window.

I assume there is some sort of pin that goes in there to keep the glass from separating from that beam. Also, I think there is some sort of metal cover for the edge of the glass to go inside the beam. Any clue where I could find one? Thanks!

_________________
1967 Barracuda Notch - Autocross 440 project
2000 Subaru Forester