Slant *        6        Forum
Home Home Home
The Place to Go for Slant Six Info!
Click here to help support the Slant Six Forum!
It is currently Sat Nov 28, 2020 11:36 pm

All times are UTC-08:00




Post new topic  Reply to topic  [ 10 posts ] 
Author Message
 Post subject: New stock exhaust man's
PostPosted: Thu Mar 01, 2007 3:57 pm 
Offline
TBI Slant 6
User avatar

Joined: Thu Feb 22, 2007 10:45 pm
Posts: 135
Location: Vancouver, WA
Car Model:
http://www.1aauto.com/1A/ExhaustManifol ... 083/475947
Above is a link to A1 auto parts.
I just recieved a NEW exhaust man for my 73 Scamp \6 from them
and looking at it in my hands, it really looks great!
Came with a new heat riser, triangles and copper rounds
for the head bolts,
intake/exhaust stud for mating the two.
All this for $109 plus shipping of $35 to my door,
for that price it's a "give me" ....

But......

Has anyone used one of these? or am I the frist???
feedback welcome.....

_________________
http://imageevent.com/jeffc
62 D100 225 3sp lwb
64 D100 A318 727pb custom lwb
66 D100 A318 4sp lwb
68 D100 B383 727 swb
65 Belveder A318 727 4d
65 Dart GT LA273 2bbl 904
73 Scamp 225 2bbl 4spOD
Old iron or no iron


Top
   
 Post subject:
PostPosted: Thu Mar 01, 2007 4:50 pm 
Offline
Board Sponsor & Contributor

Joined: Thu Oct 31, 2002 5:39 pm
Posts: 23548
Location: North America
Car Model:
Yep, these new Chinese-made exhaust manifolds are available from various vendors, and 1AAuto seem to have a good reputation as a careful and responsive vendor. Check the fit of the manifold carefully; make sure it doesn't bind on any of the mounting studs, otherwise you'll break studs sooner than later.

And note that it is very much worth your while to wait the few extra days for the good gaskets for the manifolds-to-head and the intake-to-exhaust (heat riser/hotbox) junctions.

_________________
一期一会
Too many people who were born on third base actually believe they've hit a triple.

Image


Top
   
 Post subject:
PostPosted: Thu Mar 01, 2007 8:28 pm 
Offline
TBI Slant 6
User avatar

Joined: Thu Feb 22, 2007 10:45 pm
Posts: 135
Location: Vancouver, WA
Car Model:
Made in China seems the pretty much the norm on a lot stuff today,
lot's of FedMog stuff made there too, hard to get away from it
comming from around the world..... I'll have to check that
box, didn't look China made (cardboard was too good)....
Gaskets from down under are on the way......
China castiron, Aussy gaskets, US built engine/car........ :oops:
or was it built on your side of the boarder :P

8) thanks Dan for the feedback :!:

_________________
http://imageevent.com/jeffc

62 D100 225 3sp lwb

64 D100 A318 727pb custom lwb

66 D100 A318 4sp lwb

68 D100 B383 727 swb

65 Belveder A318 727 4d

65 Dart GT LA273 2bbl 904

73 Scamp 225 2bbl 4spOD

Old iron or no iron


Top
   
 Post subject:
PostPosted: Fri Mar 02, 2007 1:29 am 
Offline
SL6 Racer & Moderator
User avatar

Joined: Sat Oct 19, 2002 12:06 pm
Posts: 7491
Location: Silver Springs, Fl.
Car Model:
Jeffc wrote:
Made in China seems the pretty much the norm on a lot stuff today,


Yeah, I was really dissapointed, when I ordered a brand new Wagner master cylinder, for a Cougar, and the box said "made in China".

_________________
Charrlie_S
65 Valiant 100 2dr post 170 turbo
66 Valiant Signet 225 nitrous
64 Valiant Signet
64 Valiant 4dr 170


Top
   
 Post subject:
PostPosted: Fri Mar 02, 2007 7:50 am 
Offline
Board Sponsor & Contributor

Joined: Thu Oct 31, 2002 5:39 pm
Posts: 23548
Location: North America
Car Model:
Jeffc wrote:
Made in China,
lot's of FedMog stuff made there too


Speaking as someone who works for one of Federal-Mogul's suppliers, I try increasingly hard to avoid their stuff on my cars.

_________________
一期一会
Too many people who were born on third base actually believe they've hit a triple.

Image


Top
   
 Post subject:
PostPosted: Sat Mar 17, 2007 9:08 am 
Offline
TBI Slant 6
User avatar

Joined: Thu Feb 22, 2007 10:45 pm
Posts: 135
Location: Vancouver, WA
Car Model:
Well got everything bolted up. Only clearance issue was at the
water/therm housing, had to grind a little off the exhman. there, otherwise
good to go......
Aussie gaskets went in just fine and sealed like a charm,
again some miner trimming in the same area as the exh man.....

_________________
http://imageevent.com/jeffc

62 D100 225 3sp lwb

64 D100 A318 727pb custom lwb

66 D100 A318 4sp lwb

68 D100 B383 727 swb

65 Belveder A318 727 4d

65 Dart GT LA273 2bbl 904

73 Scamp 225 2bbl 4spOD

Old iron or no iron


Top
   
 Post subject: Exh manifold
PostPosted: Sun Nov 04, 2007 4:51 am 
Offline
1 BBL (New)

Joined: Sun Nov 04, 2007 2:10 am
Posts: 8
Location: Pickerington, Ohio
Car Model:
I ordered one for my latest 62 slant 6 Valiant project. I got one for a 70 and it is going to work just great. I did have to drill out the back bold hole on the intake manifold just a bit but and, the holes on the exh flanges are taped and on the orig one they are drilled for pass thru bolts. I like the new heat riser on the 70 manifold, it is a wheel and is going to work real good.


Top
   
 Post subject:
PostPosted: Sat Apr 15, 2017 4:17 pm 
Offline
3 Deuce Webber

Joined: Tue Oct 06, 2015 10:56 am
Posts: 66
Car Model:
Looks like its over 300 now


Top
   
 Post subject:
PostPosted: Tue Apr 18, 2017 4:38 pm 
Offline
Supercharged
User avatar

Joined: Sat Nov 27, 2004 8:03 pm
Posts: 6381
Location: IRWIN PA
Car Model:
Got a new whirlpool microwave..

Made in china.😲

Greg

_________________
Greg Ondayko
http://www.youtube.com/hyperpack
Image


Top
   
 Post subject:
PostPosted: Tue Apr 18, 2017 6:46 pm 
Offline
Board Sponsor & Contributor

Joined: Thu Oct 31, 2002 5:39 pm
Posts: 23548
Location: North America
Car Model:
See here.

_________________
一期一会
Too many people who were born on third base actually believe they've hit a triple.

Image


Top
   
Display posts from previous:  Sort by  
Post new topic  Reply to topic  [ 10 posts ] 

All times are UTC-08:00


Who is online

Users browsing this forum: No registered users and 2 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
Powered by phpBB® Forum Software © phpBB Limited