Slant *        6        Forum
Home Home Home
The Place to Go for Slant Six Info!
Click here to help support the Slant Six Forum!
It is currently Sat Oct 05, 2024 12:15 am

All times are UTC-07:00




Post new topic  Reply to topic  [ 13 posts ] 
Author Message
PostPosted: Mon Dec 24, 2007 4:33 am 
Offline
Supercharged
User avatar

Joined: Sat Nov 27, 2004 8:03 pm
Posts: 9421
Location: IRWIN PA
Car Model:
http://www.pentastarparts.com.au/sunsho ... ail&p=2347


I dont own one of these yet. But Thought I would do Some pluging for the parts.



Check it out.

Greg

_________________
http://www.youtube.com/hyperpack
Image


Top
   
 Post subject:
PostPosted: Mon Dec 24, 2007 6:59 am 
Offline
EFI Slant 6
User avatar

Joined: Sun Feb 08, 2004 4:30 pm
Posts: 370
Location: West Mifflin PA
Car Model: 1967 Dodge Dart 270
I put that on my Christmas wish list. :D

_________________
Image
Image


Top
   
 Post subject:
PostPosted: Mon Dec 24, 2007 11:49 am 
Offline
Supercharged
User avatar

Joined: Sat Nov 27, 2004 8:03 pm
Posts: 9421
Location: IRWIN PA
Car Model:
Being that Christmas is tomorrow You should have no problem getting that in time from OZ!


Greg

_________________
http://www.youtube.com/hyperpack
Image


Top
   
 Post subject:
PostPosted: Fri Jan 01, 2016 4:37 pm 
Offline
EFI Slant 6
User avatar

Joined: Wed Feb 02, 2011 12:00 pm
Posts: 345
Location: Tustin, CA
Car Model: 1965 Barracuda 'S' auto
didnt some old industrial slants have a gear drive?

_________________
I didn' t buy it, I built it.....


Top
   
 Post subject:
PostPosted: Fri Jan 01, 2016 7:54 pm 
Offline
Board Sponsor & Contributor

Joined: Thu Oct 31, 2002 5:39 pm
Posts: 24387
Location: North America
Car Model:
Quote:
didnt some old industrial slants have a gear drive?
No. Every Slant-6 engine ever built came with a timing chain.

The five or six most ultra-hardcore Slant-6 racers in the world might legitimately need a gear drive like this. Anyone not in that category is just buying it to make noise and/or to brag about it (but I repeat myself).

_________________
一期一会
Too many people who were born on third base actually believe they've hit a triple.

Image


Top
   
 Post subject:
PostPosted: Fri Jan 01, 2016 8:16 pm 
Offline
Supercharged
User avatar

Joined: Sun Nov 03, 2002 9:20 pm
Posts: 13030
Location: Fircrest, WA
Car Model: 76 D100
I don't like noisy gear drives that might mask other bad engine noises. But that's just me.


Top
   
PostPosted: Fri Jan 01, 2016 11:49 pm 
Offline
Supercharged
User avatar

Joined: Sun Nov 03, 2002 9:20 pm
Posts: 13030
Location: Fircrest, WA
Car Model: 76 D100
Quote:
http://www.pentastarparts.com.au/sunshop/index.php?l=product_detail&p=2347
FYI- I clicked on that link, got a page that said:
Quote:
[an error occurred while processing this directive]


Top
   
PostPosted: Sat Jan 02, 2016 4:29 am 
Offline
Supercharged

Joined: Thu May 12, 2005 11:50 pm
Posts: 6291
Location: So California
Car Model: 64 Plymouth Valiant
Quote:
Quote:
http://www.pentastarparts.com.au/sunshop/index.php?l=product_detail&p=2347
FYI- I clicked on that link, got a page that said:
Quote:
[an error occurred while processing this directive]
Probably because the link is 8 years old........


:roll:

_________________
Ed
64 Valiant 225 / 904 / 42:1 manual steering / 9" drum brakes

8)


Top
   
 Post subject: Yep...
PostPosted: Sat Jan 02, 2016 9:55 am 
Offline
Board Sponsor
User avatar

Joined: Tue Oct 29, 2002 8:27 pm
Posts: 9760
Location: Salem, OR
Car Model:
Quote:
Probably because the link is 8 years old........

Yep.


There just isn't a real need for a gear drive like Dan said except may the top guys with the fastest cars...even then it is a "push" at that...

Most of the "other" brand guys in my local use them on the V-8's... since I work with some that are hard core racers, I asked one day what the parasitic loss was on their engines.... the answers I got back were about the same... quite a few have dyno'd their engines over the years, and they loose about 10% of their power over all on a mild engine (NA under 600 HP)... they loose a lot less if it's a big block torque monster in the 800+ HP range.... the reason they install it, is so that they don't get timing chain stretch repeatedly hammering the engine the amount that they do...so ultimately it's about keeping the timing and cam to crank phasing rock solid over the course of the engine's race duration...

Since we have to crape for every penny and nickel of power in our engine, I would never want to build up a street engine at 250 hp, then give back 25....that just doesn't pencil out economically in the build...
Even if I justified it with solid phasing and say a crank trigger to keep the timing from eventually walking, it's still a high price to pay for most of our applications..


Top
   
 Post subject:
PostPosted: Sat Jan 02, 2016 2:53 pm 
Offline
Board Sponsor & Contributor

Joined: Thu Oct 31, 2002 5:39 pm
Posts: 24387
Location: North America
Car Model:
…now if someone were to design a simple silent gear drive with two helical gears, the type used by Volvo and others for many years, that might be a more worthwhile item. Of course, it would require a reverse-rotation camshaft, and that in turn would require a custom cam billet so the oil pump and distributor would spin the right direction, so it would be cost-prohibitive, and that's even assuming there's enough room under the timing cover for gears of the right diameter.

Oh well…guess it's boring ol', regular ol', normal ol', functional ol' timing chains for the foreseeable future.

_________________
一期一会
Too many people who were born on third base actually believe they've hit a triple.

Image


Top
   
 Post subject:
PostPosted: Sat Jan 02, 2016 3:55 pm 
Offline
Supercharged
User avatar

Joined: Sun Nov 03, 2002 9:20 pm
Posts: 13030
Location: Fircrest, WA
Car Model: 76 D100
Quote:
Oh well…guess it's boring ol', regular ol', normal ol', functional ol' timing chains for the foreseeable future.

BAH! Who needs cheap, simple and reliable? I want expensive, complicated, and problematic! I should start getting into Italian sports cars, like maybe a Lancia.


Top
   
 Post subject:
PostPosted: Sat Jan 02, 2016 4:34 pm 
Offline
Board Sponsor & SL6 Racer
User avatar

Joined: Fri Nov 08, 2002 4:48 pm
Posts: 5835
Location: Burton BC canada
Car Model:
or a 2016 Dodge Dart?

_________________
Yeah....Im the one who destroyed this rare, vintage automobile.....

Image


Top
   
 Post subject:
PostPosted: Sat Jan 02, 2016 6:54 pm 
Offline
Supercharged

Joined: Thu May 12, 2005 11:50 pm
Posts: 6291
Location: So California
Car Model: 64 Plymouth Valiant
Quote:
…now if someone were to design a simple silent gear drive with two helical gears, the type used by Volvo and others for many years, that might be a more worthwhile item. Of course, it would require a reverse-rotation camshaft, and that in turn would require a custom cam billet so the oil pump and distributor would spin the right direction, so it would be cost-prohibitive, and that's even assuming there's enough room under the timing cover for gears of the right diameter.

Oh well…guess it's boring ol', regular ol', normal ol', functional ol' timing chains for the foreseeable future.

Reverse rotation engine so cam, oil pump and distributor spin normal

Manual transmission, so rotation direction doesn't matter.

Flip the differential over so you'll go forward.......


:wink:

_________________
Ed
64 Valiant 225 / 904 / 42:1 manual steering / 9" drum brakes

8)


Top
   
Display posts from previous:  Sort by  
Post new topic  Reply to topic  [ 13 posts ] 

All times are UTC-07:00


Who is online

Users browsing this forum: No registered users and 1 guest


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
Powered by phpBB® Forum Software © phpBB Limited