Slant *        6        Forum
Home Home Home
The Place to Go for Slant Six Info!
Click here to help support the Slant Six Forum!
It is currently Thu May 02, 2024 9:58 am

All times are UTC-07:00




Post new topic  Reply to topic  [ 4 posts ] 
Author Message
 Post subject: Pics of My Demon
PostPosted: Thu May 27, 2004 12:09 am 
Offline
2 BBL ''SuperSix''
User avatar

Joined: Tue May 25, 2004 11:14 pm
Posts: 19
Location: Salem, Oregon
Car Model:
Well, apparently Tripod won't let me link to my pics..so I can give a URL to visit. New to the board and having a great time!! Thanks!


http://sleddogg0.tripod.com


Top
   
 Post subject:
PostPosted: Thu May 27, 2004 1:17 pm 
Offline
TBI Slant 6

Joined: Mon Oct 06, 2003 6:05 am
Posts: 115
Location: Wichita, KS
Car Model:
Nice looking car!!!

_________________
'71 Dart Swinger


Top
   
 Post subject:
PostPosted: Thu May 27, 2004 5:41 pm 
Offline
3 Deuce Weber
User avatar

Joined: Sun Dec 01, 2002 7:34 pm
Posts: 67
Location: Bridgeville, PA
Car Model:
Welcome to the site. The car looks great. Let us know how it is running. What kind of engine work have you done to it internally?




Joe


Top
   
 Post subject:
PostPosted: Sat May 29, 2004 4:28 pm 
Offline
2 BBL ''SuperSix''
User avatar

Joined: Tue May 25, 2004 11:14 pm
Posts: 19
Location: Salem, Oregon
Car Model:
The motor had been built when I bought the car, it had a complete rebuild done about 3000 miles ago. It got a new crank, "perf. Cam" ( I don't know the specs, I have to do some checking), new pistons, the rods were resized, head was rebuilt with new valves ( not sure if any milling or oversized valves) all of this was on an invoice I recieved with the car, unfortunately they did not give part numbers or specify what was done as far as machine work :( All the peripherals were replaced (water pump, fuel pump etc) and it got electronic ignition. Since I have gotten the car, I have fixed the header exhaust leak, repaired the notorious fuel/temp guage problem, repaired the fuel sending unit, painted the motor and replaced the master cylinder. Right now I have the seats at the upholstery shop and am saving $$ for new carpets. I have a slight leakage at the rear of the head (gasket I am sure), I am going to try and tighten up the head bolts, but if that doesn;t work looks like the head's coming off, I will take it in and have some more work done to it then.


Jesse


Top
   
Display posts from previous:  Sort by  
Post new topic  Reply to topic  [ 4 posts ] 

All times are UTC-07:00


Who is online

Users browsing this forum: No registered users and 5 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
Powered by phpBB® Forum Software © phpBB Limited