Slant Six Forum
https://slantsix.org/forum/

Source for Longer Wheel Studs for Kelsey-Hayes Disc Brakes
https://slantsix.org/forum/viewtopic.php?f=13&t=64911
Page 1 of 1

Author:  Walter Lee Jackson [ Wed May 20, 2020 4:57 pm ]
Post subject:  Source for Longer Wheel Studs for Kelsey-Hayes Disc Brakes

Is there a source for these?

I need a 1" longer stud.

tia

--Walt Jackson

Author:  Walter Lee Jackson [ Thu May 21, 2020 8:54 am ]
Post subject:  Re: Source for Longer Wheel Studs for Kelsey-Hayes Disc Brakes

Found them:

Hemi Performance, the Australian company, has them.
http://www.hemiperformance.com.au

They are described as "overlength 7 16 wheel studs".

--Walt Jackson

Author:  DusterIdiot [ Thu May 21, 2020 4:44 pm ]
Post subject:  Re: Source for Longer Wheel Studs for Kelsey-Hayes Disc Brakes

If you have the length and thread pitch, you can also get from summit...or if you have a local "real" autoparts store with
the orange Dorman bins, a quick search through Dorman's catalog may find a bin with what you need.

That being said, you may need a stud cutter/swedge if you are removing the original studs out of an axle or disc....
Also they may not carry the reverse hand thread Pre-1968 studs and if so you will need studs for the drivers side of the
car for the rear axle and a dozen normal lugnuts...if your car is of that era and so equipped.

Page 1 of 1 All times are UTC-08:00
Powered by phpBB® Forum Software © phpBB Limited
https://www.phpbb.com/