Slant Six Forum
https://slantsix.org/forum/

60/61 Valiant - lower control arm bushes
https://slantsix.org/forum/viewtopic.php?f=13&t=65050
Page 1 of 1

Author:  blue62val [ Sun Jun 28, 2020 2:19 am ]
Post subject:  60/61 Valiant - lower control arm bushes

OK....

so - how come nobody does a reproduction lower bush for the 60/61 Valiants ?

Surely they're not that hard to make?
I've only managed to see maybe a couple on Ebay for like $80 U.S each (by the time I do a currency conversion and postage, it's like $300 AUS for 2 bushes).
So it begs the question, why can't they make them ?

Or am I looking in the wrong place ?

Peter

Author:  Dart270 [ Sun Jun 28, 2020 3:19 am ]
Post subject:  Re: 60/61 Valiant - lower control arm bushes

There was just a thread on this. Try searching user "HyperValiant," who just bought some from a company in CA (IIRC). I think it was about $100 for the pair?

Lou

Author:  blue62val [ Sun Jun 28, 2020 4:07 am ]
Post subject:  Re: 60/61 Valiant - lower control arm bushes

Dart270 wrote:
There was just a thread on this. Try searching user "HyperValiant," who just bought some from a company in CA (IIRC). I think it was about $100 for the pair?

Lou


I will Lou, thanks.

Author:  Greg Ondayko [ Mon Jun 29, 2020 7:23 pm ]
Post subject:  Re: 60/61 Valiant - lower control arm bushes

This is the thread Lou is referring to.
viewtopic.php?f=13&t=64747

Read a few posts down after I say that I don't know who michael is.


Greg

Author:  blue62val [ Fri Jul 03, 2020 3:27 am ]
Post subject:  Re: 60/61 Valiant - lower control arm bushes

Greg Ondayko wrote:
This is the thread Lou is referring to.
viewtopic.php?f=13&t=64747

Read a few posts down after I say that I don't know who michael is.


Greg


Thanks mate.
I messaged him a week or so back.....mustn't have read my message yet. Never mind.

I have found there's a guy here in Australia who says he can rebush original casings if not damaged.
Mopar Mall has them for about $58 U.S, but after conversion and postage, I have to wait a while because it's a bit price.
A club down here seems to have some NOS in stock but their parts guy is on 3 months holiday (of course).

I don't want to go the later setup.....so will wait till I can get some bushes - somehow.

Peter

Author:  Greg Ondayko [ Fri Jul 03, 2020 8:22 am ]
Post subject:  Re: 60/61 Valiant - lower control arm bushes

Cheers,

Good luck with your project!

Greg

Page 1 of 1 All times are UTC-07:00
Powered by phpBB® Forum Software © phpBB Limited
https://www.phpbb.com/