Hello again all! My throttle cable snapped at the pedal for my 1966 Plymouth Belvedere II 4 door with the 225 slant. Before I start digging into it, does anyone know a size/part#/or location to buy just the factory replacement or equivalent. Not really looking to do any serious modifications with a universal cable unless I am forced to.

Thanks again....

I would look into a cable from a '72-'78 Dodge d or w series truck. I am not sure if they are available aftermarket new or not. For sure used on ebay and in the Junkyards/Swap meets etc.

Measure the length of yours and see if the truck cables are the same or similar length.. I bet they can be modified to work.

Plenty on somewhat universal options as well out there from Lokar.


Greg

_________________
http://www.youtube.com/hyperpack

If the housing is OK and it's just the inner cable that's broken, check with your local bicycle shop to see if they can make a replacement.

_________________
Matt Cramer
1966 Dodge Dart turbo / EFI project

Ooh.. good call Matt!

_________________
http://www.youtube.com/hyperpack

Pioneer Industries makes many cables so see if they have something that is close.
https://pioneerautoinc.com/all?cat=12
Look at CA-8417 & CA-8418
DD