Slant *       6       Forum
Home Home Home
The Place to Go for Slant Six Info!
Click here to help support the Slant Six Forum!
It is currently Wed Apr 17, 2024 5:26 pm

Unanswered topics | Active topics


» » »

All times are UTC-07:00



Post new topic  Reply to topic  Page 1 of 1
  [ 11 posts ] 
  Print view Previous topic | Next topic 
Author Message
d1501983CKP33
 Post subject: Distributor
PostPosted: Thu Apr 15, 2021 1:10 pm 
Offline
4 BBL ''Hyper-Pak''

Joined: Thu Mar 26, 2020 8:11 am
Posts: 29
Car Model: D150
To my Slant6 mavens, can the distributor be pulled and indexed one tooth back? The timing was set and although set correctly the distributor is at its limit. Could the timing chain be causing this?
Top
   
Reply with quote  
kesteb
 Post subject: Re: Distributor
PostPosted: Thu Apr 15, 2021 4:08 pm 
Offline
Board Sponsor
User avatar

Joined: Wed Nov 06, 2002 1:57 pm
Posts: 2196
Location: Everett, WA
Car Model:
Yes, I doubt it.
Top
   
Reply with quote  
SpaceFrank
 Post subject: Re: Distributor
PostPosted: Fri Apr 16, 2021 8:38 am 
Offline
Turbo EFI
User avatar

Joined: Fri Dec 30, 2005 2:49 pm
Posts: 1154
Location: Houston, TX
Car Model:
Do you have the early distributor with a flat hold-down plate, or the later one with the claw mount?

The early plate mount has another bolt and slot on the back of the distributor, which you can use to rotate the plate on the distributor and adjust the range of the regular slot. This bolt is much closer to the center of rotation, so a little movement goes a long way. If your timing is correct but you're just at the limit of the main slot, I'd adjust the backside slot maybe half a bolt diameter.

_________________
Somehow I ended up owning three 1964 slant six A-bodies. I race one of them.
Escape Velocity Racing
Top
   
Reply with quote  
Louise76
 Post subject: Re: Distributor
PostPosted: Sat Apr 17, 2021 10:06 am 
Offline
Turbo Slant 6
User avatar

Joined: Mon Jan 25, 2010 11:29 pm
Posts: 672
Location: Seattle, WA
Car Model: 75 Dart SE (2),75 Swinger, 74 Dart Sport,91 Ram RV
To me, finding that broken distributer drive gear is a very fortunate "needle in the haystack" type of find. Good Job! And thanks for sharing this unusual situation with us.

_________________
"Louise", a 1976 Dart Custom project, (now sadly reverted to being just an "organ donor" to our other project Darts.)
Top
   
Reply with quote  
volaredon
 Post subject: Re: Distributor
PostPosted: Sat Apr 17, 2021 6:19 pm 
Offline
Supercharged
User avatar

Joined: Wed Oct 12, 2005 9:00 pm
Posts: 2813
Location: kankakee IL
Car Model: 80 volare, 78 fury 2 dr, 85 D150
did we miss something? I don't see anything here about a busted dist gear.....
Top
   
Reply with quote  
SpaceFrank
 Post subject: Re: Distributor
PostPosted: Mon Apr 19, 2021 2:45 pm 
Offline
Turbo EFI
User avatar

Joined: Fri Dec 30, 2005 2:49 pm
Posts: 1154
Location: Houston, TX
Car Model:
He might've meant to reply to this thread:

viewtopic.php?f=19&t=65902#p502579

_________________
Somehow I ended up owning three 1964 slant six A-bodies. I race one of them.
Escape Velocity Racing
Top
   
Reply with quote  
Louise76
 Post subject: Re: Distributor
PostPosted: Fri Apr 23, 2021 8:05 pm 
Offline
Turbo Slant 6
User avatar

Joined: Mon Jan 25, 2010 11:29 pm
Posts: 672
Location: Seattle, WA
Car Model: 75 Dart SE (2),75 Swinger, 74 Dart Sport,91 Ram RV
OOPS. :oops: :oops: :oops:

_________________
"Louise", a 1976 Dart Custom project, (now sadly reverted to being just an "organ donor" to our other project Darts.)
Top
   
Reply with quote  
Mopargrl70
 Post subject: Re: Distributor
PostPosted: Sun Dec 04, 2022 4:30 pm 
Offline
1 BBL (New)

Joined: Sun Dec 04, 2022 3:26 pm
Posts: 3
Car Model: 1970 Barracuda 225
I tuned up my 1970 225 Barracuda and found the distributor is moving all over the place. The hold down bolt is tight. I am guessing the hold down is broken, or now looking at this forum, one of the hold downs had an additional bolt on the back of the distributor. I am looking for more information on which it is.
Thanks!
Top
   
Reply with quote  
slantzilla
 Post subject: Re: Distributor
PostPosted: Sun Dec 04, 2022 4:49 pm 
Offline
Board Sponsor & Moderator
User avatar

Joined: Thu Oct 17, 2002 7:27 pm
Posts: 14151
Location: Park Forest, Illinoisy
Car Model: 68 Valiant
There is a bolt in the underside of the distributor housing that holds the bracket to the distributor. That end of the bracket is also slotted for more adjustment.

_________________
Official Cookie and Mater Tormentor.
Top
   
Reply with quote  
Mopargrl70
 Post subject: Re: Distributor
PostPosted: Sun Mar 05, 2023 7:16 am 
Offline
1 BBL (New)

Joined: Sun Dec 04, 2022 3:26 pm
Posts: 3
Car Model: 1970 Barracuda 225
Thank you, Slantzilla! It took me a while to get back to my various. That secondary bolt was very loose.
Top
   
Reply with quote  
Mopargrl70
 Post subject: Re: Distributor
PostPosted: Sun Mar 05, 2023 7:18 am 
Offline
1 BBL (New)

Joined: Sun Dec 04, 2022 3:26 pm
Posts: 3
Car Model: 1970 Barracuda 225
To get back to my car...lol. Don't know how that happened.
Top
   
Reply with quote  
Display posts from previous:  Sort by  
Post new topic  Reply to topic  Page 1 of 1
  [ 11 posts ] 

» » »

All times are UTC-07:00

Who is online

Users browsing this forum: No registered users and 47 guests

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
Powered by phpBB® Forum Software © phpBB Limited