Slant *        6        Forum
Home Home Home
The Place to Go for Slant Six Info!
Click here to help support the Slant Six Forum!
It is currently Fri Jun 24, 2022 3:26 pm

All times are UTC-07:00

Post new topic  Reply to topic  [ 2 posts ] 
Author Message
PostPosted: Thu May 19, 2022 10:59 am 
2 BBL ''SuperSix''

Joined: Tue Dec 12, 2017 5:37 pm
Posts: 10
Location: Seattle Washington
Car Model: 1968 barracuda slant six 4speed super charged
T&D roller rockers.. anybody who has them remember their push rod length?
I need to order some. Thanks

PostPosted: Thu May 19, 2022 3:13 pm 

Joined: Wed Sep 17, 2008 6:48 pm
Posts: 3559
Location: Indianapolis
Car Model:
I just put a set of roller rockers on the 68 Barracuda, your best bet is to buy or make a push rod checking tool to be sure the push rod-adjuster length is right for your engine.
The pushrod length can be different depending upon a stock vs a re ground cam being installed. If the block and or head has been cut. The length of the pushrod from someone else’s engine may not be the best choice for your engine.

If you are interested in getting the rocker arm geometry absolutely right with your roller rocker set up.
Google B3 Racing Engines, that company specializes in fixing issues with Mopar shaft mounted rocker arms. I put one of their kits in and it made a remarkable improvement in the rocker arm to valve tip contact patch.

Doo Ron Ron and the Duke of Earl are friends of mine.....

Display posts from previous:  Sort by  
Post new topic  Reply to topic  [ 2 posts ] 

All times are UTC-07:00

Who is online

Users browsing this forum: No registered users and 1 guest

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
Powered by phpBB® Forum Software © phpBB Limited