Slant *        6        Forum
Home Home Home
The Place to Go for Slant Six Info!
Click here to help support the Slant Six Forum!
It is currently Fri Oct 15, 2021 12:53 pm

All times are UTC-07:00




Post new topic  Reply to topic  [ 24 posts ]  Go to page Previous 1 2
Author Message
 Post subject:
PostPosted: Sun Apr 05, 2009 8:47 am 
Offline
TBI Slant 6

Joined: Sun Oct 19, 2008 6:29 am
Posts: 227
Location: Blue Hill, Maine
Car Model:
Dan, I dropped the original pan in my 62 and am in the middle of replacing it with the newer style pan and filter combination. I'm not sure what I expected to see when I dropped the pan, maybe a tag that says "Put filter here" or something as obvious as that. Where does the new filter plug in? Does anything have to come off to do the installation? Inquiring minds want to know.
I would be lost with out you guys.
Thanks.
Joe


Top
   
 Post subject:
PostPosted: Sun Apr 05, 2009 5:54 pm 
Offline
Board Sponsor & Contributor

Joined: Thu Oct 31, 2002 5:39 pm
Posts: 23639
Location: North America
Car Model:
You will find a metal-framed fine-mesh screen held to the underside of the valve body by three screws. Remove it and its gasket, and use those screws to secure the new 2-hole filter in its place.

_________________
一期一会
Too many people who were born on third base actually believe they've hit a triple.

Image


Top
   
 Post subject:
PostPosted: Sun Apr 05, 2009 6:37 pm 
Offline
TBI Slant 6

Joined: Sun Oct 19, 2008 6:29 am
Posts: 227
Location: Blue Hill, Maine
Car Model:
Dan, Thank you. That looked like a likely spot but I didn't want to just start removing screws and see what fit where.
You get the big gold star on your forehead for helping uninformed folk find the way.
Thanks again. I'll have the old girl on the road yet.
Joe


Top
   
 Post subject:
PostPosted: Mon Apr 06, 2009 8:50 am 
Offline
TBI Slant 6

Joined: Sun Oct 19, 2008 6:29 am
Posts: 227
Location: Blue Hill, Maine
Car Model:
Dan, I just wanted you to know the install went just as planned. The big hole/little hole all line up with the filter and all the screws fit just like they're supposed to. It's all back together with the new Mopar pan gasket, no leaks. I'm a happy man. I was going to name my next born after you but no one wants to go through life being called Slant Six.
Thank you very much. I'm sure I'm not the first and will not the last you've walked through this and many more operations like it.
Joe


Top
   
 Post subject:
PostPosted: Tue Apr 24, 2012 10:56 am 
Offline
4 BBL ''Hyper-Pak''
User avatar

Joined: Fri Mar 02, 2012 4:24 pm
Posts: 31
Car Model:
would like to point out. i brought the PN for the tranny pan to a dodge dealer and they said it was no good...

_________________
63 Valiant 4 door


Top
   
 Post subject:
PostPosted: Tue Apr 24, 2012 2:59 pm 
Offline
Board Sponsor & Contributor

Joined: Thu Oct 31, 2002 5:39 pm
Posts: 23639
Location: North America
Car Model:
You got a (very) lazy parts man who didn't bother to read his computer screen carefully. The 52118 779AB has been superseded to 52118 779AD, that's all.

_________________
一期一会
Too many people who were born on third base actually believe they've hit a triple.

Image


Top
   
 Post subject:
PostPosted: Wed Nov 02, 2016 3:48 pm 
Offline
SL6 Racer & Moderator
User avatar

Joined: Sat Oct 19, 2002 12:06 pm
Posts: 7695
Location: Silver Springs, Fl.
Car Model:
Just a update and FYI. I was searching for some other parts and found a limited source of the early inline filters. Just in case someone is trying to look original.
http://www.fatsco.net/store.html#!/Tran ... y=18246063

_________________
Charrlie_S
65 Valiant 100 2dr post 170 turbo
66 Valiant Signet 225 nitrous
64 Valiant Signet
64 Valiant 4dr 170


Top
   
 Post subject:
PostPosted: Wed Nov 02, 2016 7:24 pm 
Offline
Board Sponsor & Contributor

Joined: Thu Oct 31, 2002 5:39 pm
Posts: 23639
Location: North America
Car Model:
Nifty find, but fitty bucks for a transmission filter that'll have to be spray-painted (black) before it'll look original, yowza! :shock:

_________________
一期一会
Too many people who were born on third base actually believe they've hit a triple.

Image


Top
   
PostPosted: Fri Oct 08, 2021 8:30 pm 
Offline
1 BBL (New)

Joined: Mon Jan 18, 2010 9:04 am
Posts: 2
Location: Washington, DC
Car Model: 1963 Valiant Convert
Just installed this on my '63 Valiant. That new transmission pan is quite the washtub. It feels a little odd to have 1-1/2 gallons of extra Dexron VI sloshing away in there. That stuffs' not so cheap! Anyway, my pan needed a bit of adjustment in one spot with my grinder to clear a protrusion on the cable shifter housing. it looked like it might be possible to loosen and reposition it slightly, but I decided not to bmess with something that's been in place for nearly sixty years when a 1/2 inch long grind into the out lip by 1/8" would do. I noticed that my original, without a drain plug, but quite shallow with no depression, had a contour that avoided the protrusion.
Just thought I'd post here in case any one else had this problem.


Top
   
Display posts from previous:  Sort by  
Post new topic  Reply to topic  [ 24 posts ]  Go to page Previous 1 2

All times are UTC-07:00


Who is online

Users browsing this forum: No registered users and 13 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
Powered by phpBB® Forum Software © phpBB Limited