Hi all,

I have put a new coil into my engine, but am getting no spark. I am testing my new coil and get the following readings.

1. 1.2 OHMS (200). Primary windings + to - posts.
2. 8.26 OHMS (20k). Secondary windings + to inside of coil.

I also tested my coil to distributor wire and got the following reading.

1. 5.68 OHMS (20k)

It seems like I should see some sort of spark, does it sound like I have wired something incorrectly?

Sincerely,

Paul Barrow