Slant *        6        Forum
Home Home Home
The Place to Go for Slant Six Info!
Click here to help support the Slant Six Forum!
It is currently Thu Mar 28, 2024 10:09 pm

All times are UTC-07:00




Post new topic  Reply to topic  [ 5 posts ] 
Author Message
PostPosted: Thu Feb 17, 2022 1:31 pm 
Offline
2 BBL ''SuperSix''

Joined: Sun Jan 22, 2012 12:11 pm
Posts: 11
Location: Klamath Falls, OR
Car Model:
I’ve been searching around for a while now, and it looks like my only option is to get creative with a turbo charger… unless?
I’ve seen a few pictures on this site and the internet showing that turboing a slant is possible with an AC compressor, but the pipe work involved and the fitment… looks a bit beyond my fabrication abilities.
Has anyone successfully supercharged a slant with AC? I’m sure the bracketry required would push my abilities too, just wondering if it’s been done before or if it’s possible.

Alternatively… would it be possible to run a newer compact power steering pump, and use it to run a hydraulic motor & AC compressor setup? Similar to a hydroboost brake system. I know this is something that is used in the heavy equipment industry, but haven’t done enough research/math yet to know if it can be scaled down to a slant friendly size.


Top
   
PostPosted: Fri Feb 18, 2022 9:38 am 
Offline
Supercharged
User avatar

Joined: Sat Nov 27, 2004 8:03 pm
Posts: 8977
Location: IRWIN PA
Car Model:
dartresurector67 wrote:
I’ve been searching around for a while now, and it looks like my only option is to get creative with a turbo charger… unless?
I’ve seen a few pictures on this site and the internet showing that turboing a slant is possible with an AC compressor, but the pipe work involved and the fitment… looks a bit beyond my fabrication abilities.
Has anyone successfully supercharged a slant with AC? I’m sure the bracketry required would push my abilities too, just wondering if it’s been done before or if it’s possible.

Alternatively… would it be possible to run a newer compact power steering pump, and use it to run a hydraulic motor & AC compressor setup? Similar to a hydroboost brake system. I know this is something that is used in the heavy equipment industry, but haven’t done enough research/math yet to know if it can be scaled down to a slant friendly size.


Not sure on the super charger with A/C ... but....
Brian Mimken Has Done a remote Turbo back near the Leaf spings and has AC and PS in his '74 Duster.

I am sure he can tell you more about it.

I am not sure he is on the forum much so If you want his contact Info PM me and I will get it to 'ya.

_________________
http://www.youtube.com/hyperpack
Image


Top
   
PostPosted: Fri Feb 18, 2022 10:57 am 
Offline
Board Sponsor
User avatar

Joined: Wed Nov 06, 2002 1:57 pm
Posts: 2195
Location: Everett, WA
Car Model:
There is always Big Red http://www.projectplato.com/cars/bigredhome.html


Top
   
PostPosted: Sat Feb 19, 2022 8:36 pm 
Offline
Board Sponsor & Moderator
User avatar

Joined: Thu Oct 17, 2002 7:27 pm
Posts: 14119
Location: Park Forest, Illinoisy
Car Model: 68 Valiant
Didn't Mopar Frank end up with Big Red when Al sold it?

_________________
Official Cookie and Mater Tormentor.


Top
   
PostPosted: Sun Feb 20, 2022 3:57 am 
Offline
SL6 Racer & Moderator
User avatar

Joined: Sat Oct 19, 2002 12:06 pm
Posts: 8422
Location: Silver Springs, Fl.
Car Model:
Here is one option
https://www.gillwelding.com/product-pag ... kit-pbt-ac

_________________
Charrlie_S
65 Valiant 100 2dr post 170 turbo
66 Valiant Signet 225 nitrous
64 Valiant Signet
64 Valiant 4dr 170


Top
   
Display posts from previous:  Sort by  
Post new topic  Reply to topic  [ 5 posts ] 

All times are UTC-07:00


Who is online

Users browsing this forum: No registered users and 8 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
Powered by phpBB® Forum Software © phpBB Limited