Slant *        6        Forum
Home Home Home
The Place to Go for Slant Six Info!
Click here to help support the Slant Six Forum!
It is currently Sat Oct 12, 2024 9:43 am

All times are UTC-07:00




Post new topic  Reply to topic  [ 23 posts ]  Go to page Previous 1 2
Author Message
PostPosted: Sat Apr 20, 2024 4:42 pm 
Offline
Supercharged
User avatar

Joined: Sat Nov 27, 2004 8:03 pm
Posts: 9432
Location: IRWIN PA
Car Model:
Sounds Good.
Thank you Karl.

_________________
http://www.youtube.com/hyperpack
Image


Top
   
PostPosted: Sat Apr 27, 2024 1:18 am 
Offline
TBI Slant 6

Joined: Tue May 17, 2005 8:05 am
Posts: 172
Location: Portland OR
Car Model: 1964 Valiant 2dr post
Hi Guys:

Like I said, I haven't forgotten this post. I received the Laser parts late this week, fixed the laser and cut some test parts that turned out really nice. Now I'm in the middle of a very busy weekend at this facility. By the end of the week, I will cut test files, checked fitment, and posted the final, workable, DXF/DWG that can be used by any laser, plasma, waterjet cutting firm to produce a valve cover spacer or gasket.

Sorry it's taking so long, but this isn't my day job, just something I'm lucky enough to have access too.

Karl

_________________
64 GTO...10.80's@122 on street radials
Destroked 455, Qjet, stock ign, 2400 stall

64 Valiant
Old 225, 4spd, 2.92-8.75, 2bbl, headers
dual 2.25"
Image


Top
   
PostPosted: Wed May 01, 2024 3:25 pm 
Offline
TBI Slant 6

Joined: Tue May 17, 2005 8:05 am
Posts: 172
Location: Portland OR
Car Model: 1964 Valiant 2dr post
Hi Guys,

Finally got the parts for the laser and repaired it. Modified drawing with wider corners and corrected length. Last night I burned another template and it fits great.

Image

Unfortunately, the forum software will not allow me to attach .DXF or .DWG drawings. It doesn't allow those extensions. I tried uploading after renaming without the extension included, but the forum recognized the the file types anyway.

So if you want the files I will need to email them to you. PM you're email address, and I'll forward a copy of the files.

I went to sendcutsend.com and quickly got a laser quote. I've found Send Cut Send to have the lowest prices for smaller quantities than other online laser cutters, and the service and quality has been excellent.

Prices include shipping.

Least expensive:

1/4" Aluminum 2024 T3

1 Spacer = $70.49
2 spacers = $49.34ea or $98.68 total to your door.

Note: ***They do not offer 3/8" in 2024 T3 alloy.

Least expensive 3/8":

3/8" Aluminum 5052 H32

1 spacer = $148.70
2 spacers = $102.80ea or $205.60 total

6061 alloy is quite a bit more expensive.

Gearhead
AKA Karl

_________________
64 GTO...10.80's@122 on street radials
Destroked 455, Qjet, stock ign, 2400 stall

64 Valiant
Old 225, 4spd, 2.92-8.75, 2bbl, headers
dual 2.25"
Image


Top
   
PostPosted: Mon May 06, 2024 5:51 am 
Offline
Supercharged
User avatar

Joined: Sat Nov 27, 2004 8:03 pm
Posts: 9432
Location: IRWIN PA
Car Model:
Thanks for the work Karl!

Greg

_________________
http://www.youtube.com/hyperpack
Image


Top
   
PostPosted: Wed May 08, 2024 1:34 pm 
Offline
Turbo EFI

Joined: Sat Feb 20, 2010 10:23 am
Posts: 1325
Location: N. Ga.
Car Model: 64 Valiant
Quote:
Hi Guys,

Finally got the parts for the laser and repaired it. Modified drawing with wider corners and corrected length. Last night I burned another template and it fits great.

Image

Unfortunately, the forum software will not allow me to attach .DXF or .DWG drawings. It doesn't allow those extensions. I tried uploading after renaming without the extension included, but the forum recognized the the file types anyway.

So if you want the files I will need to email them to you. PM you're email address, and I'll forward a copy of the files.

I went to sendcutsend.com and quickly got a laser quote. I've found Send Cut Send to have the lowest prices for smaller quantities than other online laser cutters, and the service and quality has been excellent.

Prices include shipping.

Least expensive:

1/4" Aluminum 2024 T3

1 Spacer = $70.49
2 spacers = $49.34ea or $98.68 total to your door.

Note: ***They do not offer 3/8" in 2024 T3 alloy.

Least expensive 3/8":

3/8" Aluminum 5052 H32

1 spacer = $148.70
2 spacers = $102.80ea or $205.60 total

6061 alloy is quite a bit more expensive.

Gearhead
AKA Karl
I asked Chuck several years ago if he would make it possible to post CAD files such as dxf and dwg extensions within the CAD/CAM discussion subforum and he did. I've shared some of mine with people on here before. Wonder why its no longer working....?

_________________
There's no such thing as too much cam....only not enough engine!
Image


Top
   
PostPosted: Mon May 13, 2024 6:17 am 
Offline
Supercharged
User avatar

Joined: Sat Nov 27, 2004 8:03 pm
Posts: 9432
Location: IRWIN PA
Car Model:
Here are the Links to Karl's Files:

Valve Cover Gasket / Spacer .DWG File
- and -
Valve Cover Gasket / Spacer .DXF File


Greg

_________________
http://www.youtube.com/hyperpack
Image


Top
   
PostPosted: Thu Aug 29, 2024 10:43 am 
Offline
Supercharged

Joined: Wed Sep 17, 2008 6:48 pm
Posts: 3819
Location: Indianapolis
Car Model:
Question

what would it take to modify the existing valve cover spacer file to incorporate the dog leg on the lower front valve cover area that makes the hydraulic heads unique?

Personally I prefer the hydraulic heads as they were cast using the foundry core and casting technology of the 1980's which was significantly more stable for port and water jacket wall thickness compared to the foundry core and casting technology that was used in the 1970's and 1960's.

_________________
Doo Ron Ron and the Duke of Earl are friends of mine.....
https://www.youtube.com/watch?v=uX8Nj8ABEI8


Top
   
PostPosted: Mon Sep 02, 2024 8:04 am 
Offline
Supercharged
User avatar

Joined: Sat Nov 27, 2004 8:03 pm
Posts: 9432
Location: IRWIN PA
Car Model:
I think It would take Karl or I to put the dogleg in and create a new file.

Greg

_________________
http://www.youtube.com/hyperpack
Image


Top
   
Display posts from previous:  Sort by  
Post new topic  Reply to topic  [ 23 posts ]  Go to page Previous 1 2

All times are UTC-07:00


Who is online

Users browsing this forum: No registered users and 1 guest


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
Powered by phpBB® Forum Software © phpBB Limited