Here is a Laser cut version of the scraper and another shot of it laid out over my tracing of the scraper.
Greg
| Slant Six Forum https://slantsix.org/forum/ |
|
| 225 FORGED CRANK SCRAPER .pdf and.DWG https://slantsix.org/forum/viewtopic.php?f=32&t=62341 |
Page 1 of 1 |
| Author: | Greg Ondayko [ Mon May 14, 2018 10:03 am ] |
| Post subject: | 225 FORGED CRANK SCRAPER .pdf and.DWG |
Here is a Link to a copy of the forged crank Scraper - https://drive.google.com/drive/folders/ ... sp=sharing This is the Oil Pump side for a 225 Forged Crank with RG Forged Block use it to make your own etc. Let me know if there are any problems. If you are printing on regular letter paper it will take 3 sheets. Greg |
|
| Author: | Greg Ondayko [ Mon May 21, 2018 8:51 am ] |
| Post subject: | Re: 225 FORGED CRANK SCRAPER .pdf and.DWG |
Here is a Laser cut version of the scraper and another shot of it laid out over my tracing of the scraper. Greg |
|
| Author: | drgonzo [ Mon May 21, 2018 10:24 am ] |
| Post subject: | Re: 225 FORGED CRANK SCRAPER .pdf and.DWG |
That is awesome. Looks like I will be making one of these scrapers. Anyone have a pattern for a windage tray? |
|
| Author: | Greg Ondayko [ Tue May 22, 2018 5:32 am ] |
| Post subject: | Re: 225 FORGED CRANK SCRAPER .pdf and.DWG |
Here are some shots of the part modeled on the engine - No Crank or rods to check clearance on but proof of concept.   Greg |
|
| Author: | Rick Covalt [ Sun Apr 12, 2020 1:07 pm ] |
| Post subject: | Re: 225 FORGED CRANK SCRAPER .pdf and.DWG |
Greg I have been trying to print this and I can't seem to get it to print right. Only prints one page and it is just a partial scraper. Is there some trick to this? |
|
| Author: | Greg Ondayko [ Sun Apr 12, 2020 6:28 pm ] |
| Post subject: | Re: 225 FORGED CRANK SCRAPER .pdf and.DWG |
Well you have to have a printer that can Print the size of the engine.. Like something at a graphics shop. I dont think it will print correctly at your home printer. Greg |
|
| Author: | Rick Covalt [ Mon Apr 13, 2020 3:03 am ] |
| Post subject: | Re: 225 FORGED CRANK SCRAPER .pdf and.DWG |
Quote: If you are printing on regular letter paper it will take 3 sheets. Ok, I read the quote above and just thought it would print out on 3 regular pages on my printer and I would put them together? |
|
| Author: | emsvitil [ Mon Apr 13, 2020 3:12 am ] |
| Post subject: | Re: 225 FORGED CRANK SCRAPER .pdf and.DWG |
Open as PDF then print Under printer options: custom scale 100% poster It looks like it will print some blanks, just save the paper for later |
|
| Author: | turbo66valiant [ Mon Apr 13, 2020 7:25 am ] |
| Post subject: | Re: 225 FORGED CRANK SCRAPER .pdf and.DWG |
Hey, I tried the same but could only get the center 11" to scale then guessed on the rest. It turned out great. Thanks Greg for the help!! |
|
| Author: | Greg Ondayko [ Mon Apr 13, 2020 3:09 pm ] |
| Post subject: | Re: 225 FORGED CRANK SCRAPER .pdf and.DWG |
Glad to be of assistance Ryan! turn that hairdryer up to 11! Greg |
|
| Author: | jcc [ Sat May 16, 2020 1:23 pm ] |
| Post subject: | Re: 225 FORGED CRANK SCRAPER .pdf and.DWG |
Thank you for sharing. 
|
|
| Page 1 of 1 | All times are UTC-07:00 |
| Powered by phpBB® Forum Software © phpBB Limited https://www.phpbb.com/ |
|