Slant *        6        Forum
Home Home Home
The Place to Go for Slant Six Info!
Click here to help support the Slant Six Forum!
It is currently Fri Mar 29, 2024 1:55 am

All times are UTC-07:00




Post new topic  Reply to topic  [ 513 posts ]  Go to page 1 2 3 4 535 Next
Author Message
PostPosted: Sun Dec 04, 2016 6:48 pm 
Offline
Supercharged
User avatar

Joined: Sat Nov 27, 2004 8:03 pm
Posts: 8977
Location: IRWIN PA
Car Model:
12/4/16

Hi Guys, This is the first Post about my Road Race / AutoX Project 1964 Dart GT Named Grüne Hölle.

I have Owned this car for almost a year and a Half.

It is an Honest Running and Driving Bone Stock Slant 6 car with who Knows how many Miles on it, as the Speedometer / Odometer does not work.

To The best of my knowledge the car has spent most of it's life in southern Georgia.

I bought it off of a forum Member in August 2015 and Took Delivery of it October 2015.

I hauled it Back To PA and was doing some small safety additions / repairs as well as cleaning the car up a bit. - This is what it looked Like when it arrived: - Car is worse than it looks in Pictures - it's a 50 Footer.
Image


Image


Image


Image


Image

Currently it's 225 with a 3 on the tree and Runs and drives well.
I have been gathering parts for about a year and have just really gotten started on getting this car ready for the track.

As this will be a street and Track car, It will need to have all legal Lights wipers etc.. So I will have to figure out some creative ways to Lighten up the car.

It will also need to be water tight which right now it's anything but.
New front and rear Windshield gaskets as well as a new windshield have been ordered and plant to be installed after welding and Headliner are complete.

The Rear Window Channel was trashed, as well as the Trunk Floor extensions and many of the areas behind the bumper.

I Began some cutting and welding this past week.

Here are some pics:

Enjoy!

Greg

Image


Image


Image


Image


Woah... Holes
Image


Image


Image


Image


Image


Image


Image


Image


Image


Image


Image


Image


Image


Image


Image


Some Progress.......
Image


Lots of Welding and Grinding..
Image


Image


Ear Protection also works well for ignoring wife and kid.
Image

_________________
http://www.youtube.com/hyperpack
Image


Last edited by Greg Ondayko on Fri Mar 23, 2018 3:06 pm, edited 1 time in total.

Top
   
 Post subject:
PostPosted: Mon Dec 05, 2016 7:31 am 
Offline
Board Sponsor & Moderator
User avatar

Joined: Mon Oct 21, 2002 11:08 am
Posts: 16451
Location: Blacksburg, VA
Car Model:
Nice to see significant progress, Greg! I am tempted to call is "Rustaaahhhh II"...

Lou

_________________
Home of Slant6-powered fun machines


Top
   
 Post subject:
PostPosted: Mon Dec 05, 2016 7:58 am 
Offline
Supercharged
User avatar

Joined: Sat Nov 27, 2004 8:03 pm
Posts: 8977
Location: IRWIN PA
Car Model:
Dart270 wrote:
Nice to see significant progress, Greg! I am tempted to call is "Rustaaahhhh II"...

Lou

Lou,

This one is Supposed to have Less rust. :-)
Hence the Grüne Hölle Designation -
I think it's appropriate as i feel it has a few reasons why it should work as a car / Project Title.

After the Rust Repairs are complete and Painted, I will Probably Leave the Lovely Faded Patina on the car.

A can of WD40 and a rag Makes it look sweet!

Greg

_________________
http://www.youtube.com/hyperpack
Image


Top
   
 Post subject:
PostPosted: Wed Dec 07, 2016 8:55 am 
Offline
Turbo EFI
User avatar

Joined: Mon Aug 02, 2010 7:36 am
Posts: 1200
Location: Rome, GA
Car Model: 1963 Dart 270, 1980 D150
Following this thread I just realized something. I have weiße Hölle. Cool.


Top
   
 Post subject:
PostPosted: Wed Dec 07, 2016 10:33 am 
Offline
Supercharged
User avatar

Joined: Sat Nov 27, 2004 8:03 pm
Posts: 8977
Location: IRWIN PA
Car Model:
Very Good Dr.

Everyone has their own i am sure.

in this case the Grüne Hölle is the color and an homage' to the Baddest / best road course on the earth!

Greg

_________________
http://www.youtube.com/hyperpack
Image


Top
   
 Post subject:
PostPosted: Fri Dec 09, 2016 5:55 am 
Offline
Turbo EFI
User avatar

Joined: Mon Aug 02, 2010 7:36 am
Posts: 1200
Location: Rome, GA
Car Model: 1963 Dart 270, 1980 D150
A lot of nice work already into your project. I am looking forward to following this build.


Top
   
 Post subject: 12-18-16 Some Progress
PostPosted: Sun Dec 18, 2016 11:26 am 
Offline
Supercharged
User avatar

Joined: Sat Nov 27, 2004 8:03 pm
Posts: 8977
Location: IRWIN PA
Car Model:
Hi Guys,

I have made some Progress:

Lots of Welding and Grinding to go, but the rear Window Channel Is Mostly Done, Just some more grinding and finish welding and smoothing - No More Holes back there which should be nice!

The big areas that i needed to cut out the rust are filled in with metal now, especially the L/R sides where the Rear Window Channel Meets the 1/4 Panel and the Trunk Area - Most of that was trash and Had to get cut out.


I began to work on the RF windshield channel / cowl area. I should be able to get it into shape by 2017!

Pics:

Both Rear Window Corners are Done:
Image


Image


Image



Image


Image


Image


THe Bottom Lip to the Trunk Area is Full of metal now - Still Lots of Grinding and smoothing to do.
Image


Starting to Work on the RF Cowl / Windshield Metal:
Image


THe More I Grind, the More holey the car gets :-0
Image



Image


Adding Metal again to the Front:
Image


Image


Image


Making Progress!

_________________
http://www.youtube.com/hyperpack
Image


Top
   
 Post subject:
PostPosted: Sun Dec 18, 2016 12:01 pm 
Offline
Board Sponsor & SL6 Racer
User avatar

Joined: Fri Nov 08, 2002 4:48 pm
Posts: 5835
Location: Burton BC canada
Car Model:
You work fast Maestro !

_________________
Yeah....Im the one who destroyed this rare, vintage automobile.....

Image


Top
   
PostPosted: Thu Dec 29, 2016 3:48 pm 
Offline
Supercharged
User avatar

Joined: Sat Nov 27, 2004 8:03 pm
Posts: 8977
Location: IRWIN PA
Car Model:
sandy in BC wrote:
You work fast Maestro !


If you Say so Sir?
I have Metronome set at ♩= 234 / Prestissimo for this Job!

Here's What I have accomplished since Last Post..
Rear Window Channel / Pinch weld area is all done with no more holes etc.
Finished with few coats of POR-15 in Satin Black.
Also Removed all of the Paint from the Sheet metal around the Trunk Lid. Plans include to Put a Tape Line under the top of the quarter Panel Seam and Paint This Area Semi Gloss Black..
Image


Image


Image


Image


I didn't spend as much time making the inside of this area Look Good as when the Window / Gasket and Reveal Molding are installed no one will ever see it.
Image



Image


The area Below the Taillight Buckets and Behind the Bumper trim moldings were gone - Will be rebuilding those from Scratch and burning in some steel - No Bondo for me.
Image



Image

Windshield Pinch Weld area is Rebuilt where needed, but when cleaning up I found an area under the lead where there was no steel and lots of holes in the cowl... so another Patch will go in there.
Image


Image

Plans include taking 2 bumpers to make one good one..The Bumper from the car is twisted and Bent alot - Foreground - The farm fresh one in the back is good for a paint job, but one corner has no steel in it... so I will cut a spot out of the bent one and weld it in the holey one.. The chrome is there but no steel behind it.
Image


That's it for now.
Future plans include a new headliner, sail panel boards, etc, before putting windshields back in.

Then Getting to the metal work in the Rear bumper area and Grafting 2 bumpers into one.


Greg

_________________
http://www.youtube.com/hyperpack
Image


Top
   
 Post subject:
PostPosted: Fri Dec 30, 2016 4:30 am 
Offline
Board Sponsor & Moderator
User avatar

Joined: Mon Oct 21, 2002 11:08 am
Posts: 16451
Location: Blacksburg, VA
Car Model:
Cool. Narrow/sculpt bumper too? Just thinking of ways to slow you down... ;)

Lou

_________________
Home of Slant6-powered fun machines


Top
   
 Post subject:
PostPosted: Fri Dec 30, 2016 7:02 am 
Offline
Supercharged
User avatar

Joined: Sat Nov 27, 2004 8:03 pm
Posts: 8977
Location: IRWIN PA
Car Model:
Dart270 wrote:
Cool. Narrow/sculpt bumper too? Just thinking of ways to slow you down... ;)

Lou

Hi Lou, not sure i follow unless making the bumper lighter is bad as less weight over the rear?


I think i will shave the bumper bolts and smooth them away.

If i didnt have a job and kid well then maybe i would foose the bumpers.

I just like that this car is allowing me to work on my metal fab skills..

Greg

_________________
http://www.youtube.com/hyperpack
Image


Top
   
 Post subject:
PostPosted: Fri Dec 30, 2016 2:19 pm 
Offline
Supercharged
User avatar

Joined: Sat Feb 16, 2008 1:25 pm
Posts: 5599
Location: Downeast Maine
Car Model:
I feel your pain. I am working on a an equally rusty International 1200B pick-up. Welding on old rusty porous metal is a challenge, and often frustrating. I figure about 10% of melted mig wire remains in vehicle, the rest gets swept up off the floor...

Nice job.

_________________
67' Dart GT Convertible; the old Chrysler Corp.
82' LeBaron Convertible; the new Chrysler Corp
07' 300 C AWD; Now by Fiat, the old new Chrysler LLC

Image


Top
   
 Post subject: More Progress 1-17-17
PostPosted: Tue Jan 17, 2017 5:53 pm 
Offline
Supercharged
User avatar

Joined: Sat Nov 27, 2004 8:03 pm
Posts: 8977
Location: IRWIN PA
Car Model:
This thing is getting Less Holey!


Stainless is Polished and New Reveal Clips and Screws replace the rotted Junk:
Image



Image


Image


Image


Less Holes around the LH Rear Tail Light Bucket and Moulding area:
Image



Image


Image


Image


Image

It's Not Restoration Quality but it's one piece and there will no longer be exhaust fumes pulled in the back of the car once it's done :-)

Lots of holes left on this side:
Image


Image



Bumper Bolts getting smoothed:
Image


Image


Image


Image


Image


Image


Next Weekend - Tackle the RH Tail Light Bucket.


Greg

_________________
http://www.youtube.com/hyperpack
Image


Top
   
PostPosted: Mon Jan 30, 2017 1:26 pm 
Offline
Supercharged
User avatar

Joined: Sat Nov 27, 2004 8:03 pm
Posts: 8977
Location: IRWIN PA
Car Model:
1-30-17 Most of the Metal Work is done at least for this Winter.

I still Have The Trunk Floor extensions to Cut out and fab and Weld in place, But I think I can wait until next winter or summer on those..

I Tidy'd up the Sheetmetal around the back and Sprayed it with some Semi-gloss Black.

We'll see if it looks okay once the Bumper is Painted and installed.

Soon I will get the Headliner in and glued then I can Put the Windows and Rest of the Trim and interior Back in.

Here are some Pics:

new Rear Trunk Look - Surround in Black with Gnarly 50 Year old 3 resprays of green on the trunk
Image


Taillight openings will look better when I get the Lights back in there.
Image


Image


Image


Image


Image


Image


Image


Image


Inside Shot of the Housings etc.. Not Pretty, but Gets the Job Done.
Image


Image


Image


Image


Image


Image


When I got this car, it was missing the Upper Quater Spear trim and clips on both sides.VW Bug clips can be made to work with some drilling and Rivet Mods as well as rivet trimming.
Image


Image


Lastly, the Inside of the Nasty parts Bumper was cleaned, Treated and Prepped for a coat of POR-15 Semi Gloss. Not too bad now.. Just need to get to the Top side with some black as well.
Image


Greg

_________________
http://www.youtube.com/hyperpack
Image


Top
   
 Post subject: 3-12-17 Update
PostPosted: Sun Mar 12, 2017 4:36 pm 
Offline
Supercharged
User avatar

Joined: Sat Nov 27, 2004 8:03 pm
Posts: 8977
Location: IRWIN PA
Car Model:
3-12-17
Here are Some pictures - Most of the Winter Work is Done For Now.. Still waiting on a few parts.


Pictures:
Side Profile Still Looks relatively stock...
Image


Nos Valence Painted in Satin Black Cleans up the Front and gets rid of the Smashed up trash that was there before :-o
Image


Image



Indicators Are now in the Headlamp Bulbs and The Old Indicator Holes in the Valence will serve as Possible Brake Cooling Ducts or Air Inlets for the Engine.
Image


New Windshield and Gasket is installed - Old Lockstrip is reused for now - New one arriving soon.
Image


While Windshield was out many dash components were polished and rebuilt. It's nice to have working and readable needles in your gauges again.
Image

Rear Window installed / Stainless Trim Buffed to Shine!
Image



Rear Bumper Painted and Installed.
Image


Image


I will be watering the Money Tree again for the Suspension and Brake Work To begin!
Greg

_________________
http://www.youtube.com/hyperpack
Image


Top
   
Display posts from previous:  Sort by  
Post new topic  Reply to topic  [ 513 posts ]  Go to page 1 2 3 4 535 Next

All times are UTC-07:00


Who is online

Users browsing this forum: No registered users and 1 guest


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
Powered by phpBB® Forum Software © phpBB Limited