Slant Six Forum
https://slantsix.org/forum/

Holley 1 brl swap not so easy?
https://slantsix.org/forum/viewtopic.php?f=44&t=66653		 Page 1 of 1
Author:  66wagonDart [ Sat Jul 02, 2022 10:06 pm ]
Post subject:  Holley 1 brl swap not so easy?
Checking with the gurus here. I have an all original’66 wagon but original carb is giving me fits. I’ve kept it, but bought a reman just to get car back on road while I figure out long term carb solve.
The reman came with no provision (knuckle) for trans kick down & throttle? Almost looks like a manual car version? Is this wrong carb, an adapter assembly available or am I totally missing the boat?

Pic attached… hopefully

Attachments:
6902158F-B612-4BF5-A309-31943F6CA430.jpeg
6902158F-B612-4BF5-A309-31943F6CA430.jpeg [ 29.28 KiB | Viewed 913 times ]
Author:  Charrlie_S [ Sun Jul 03, 2022 6:41 am ]
Post subject:  Re: Holley 1 brl swap not so easy?
That is the wrong carb. The one on the left is the correct one for a slant six with out air conditioning. They used the "twisty" throttle linkage. The carb on the right is either for a later year or possibly a 66 with air conditioning. Used a cable throttle linkage.
Author:  66wagonDart [ Sun Jul 03, 2022 8:26 pm ]
Post subject:  Re: Holley 1 brl swap not so easy?
Thanks Charrlie. Will see if I can get swapped for correct one.
Author:  66wagonDart [ Thu Jul 07, 2022 7:08 pm ]
Post subject:  Re: Holley 1 brl swap not so easy?
Any suggestions on where to find a rebuilt Holley 1920 w/ “twister” knuckle? Am not finding online?

Thanks
Page 1 of 1 All times are UTC-07:00
Powered by phpBB® Forum Software © phpBB Limited
https://www.phpbb.com/