Slant *        6        Forum
Home Home Home
The Place to Go for Slant Six Info!
Click here to help support the Slant Six Forum!
It is currently Thu Mar 28, 2024 1:17 am

All times are UTC-07:00




Post new topic  Reply to topic  [ 1220 posts ]  Go to page 1 2 3 4 582 Next
Author Message
PostPosted: Sun Jul 05, 2009 8:18 pm 
Offline
Supercharged
User avatar

Joined: Sat Nov 27, 2004 8:03 pm
Posts: 8977
Location: IRWIN PA
Car Model:
Well I picked up this car in December of 2008 form my Dad.

This Rust Belt machine has nothing unrotted or unrusted anywhere on the car.

This car has an undertininate amount of mileage on it. Maybe 150-300,000??

7/5/09
So far I am doing all the sheetmetal work welding, fabbing etc. Anything that is rotted that is not needed to go down the track is getting cut off the car and what's left is welded up. I am almost done with the sheetmetal work. I need to get another tank of C02 For the welder and I Am going to buy a floorpan segment at carlisle this weekend. I also Have one more quarter panel to re-attatch to the Wheelhouse.

Front suspension has been switched over to Big Bolt with Big Upper Ball joints using Volare Discs Calipers, rotors, Hoses etc. Lower Ball joint is 73-76 A body disc Brake Style.

Dash is stripped except for the frame.

Battery is moved to the trunk and Master Switch added.


Upcoming plans:

Fuel Cell

8 3/4" rear

Inboard Springs

LR Frame Reinforcement

Drivetrain Will happen over the Winter as Time and budget allow.

Hope to hit the track in Spring 2010.

Pics:

I found a Pic of this car From 1989 When My Dad Sold it on the Used car lot.. I was Sure Looking Pretty Back then!
Image


Front View. - It's worse than it looks!
Image

Rear View.
Image

Hopefully All this will be repalced by a 12 Second Drivetrain.
Image

Right Quarter Rot.
Image


Left Quarter Repair - Right Will look about the same! Black and gold for Pittsburgh!
Image

More Rot
Image

Fred Flintstone Style Floors - This is before I did any cutting Here!
Image

_________________
http://www.youtube.com/hyperpack
Image


Last edited by Greg Ondayko on Tue Jul 08, 2014 12:14 pm, edited 1 time in total.

Top
   
 Post subject: Unique racer
PostPosted: Sun Jul 05, 2009 9:29 pm 
Offline
Turbo Slant 6

Joined: Fri Jul 13, 2007 11:11 pm
Posts: 654
Location: Cincinnati
Car Model:
Nice to see this 4 door '68 Valiant being saved and put to good use.....if the Dart is any indication of your work this one will turn out Great!
By the way I was at the junkyard on Friday looking around and what do I find...a '68 Valaint 4-door....black primer with blue interior and a/c with 225 slant 6.......but it was looking miserable....The grill was still gleaming but both sides were bent up and alot of the a/c stuff was gone and it looked like at some point it had one or more cars stacked on top of it...if I had more room I would have brought it home... :cry: .......nico


Top
   
 Post subject:
PostPosted: Mon Jul 06, 2009 3:55 am 
Offline
Supercharged
User avatar

Joined: Sat Nov 27, 2004 8:03 pm
Posts: 8977
Location: IRWIN PA
Car Model:
Well it (the Valiant)will never be shiny and When it gets wet I will not have to dry it or wipe it down or wax it like I do with the dart.

But yes the frame and chassis are going to get put to good use.


Greg

_________________
http://www.youtube.com/hyperpack
Image


Top
   
 Post subject: 7-6-09 Pictorial update.
PostPosted: Mon Jul 06, 2009 8:43 am 
Offline
Supercharged
User avatar

Joined: Sat Nov 27, 2004 8:03 pm
Posts: 8977
Location: IRWIN PA
Car Model:
Some pics.

Man this car is ugly But I love it!



With Front Bumper removed - Maybe a fiberglas one will go on there someday.
Image

RF Fender Was hit and was heavily involved in plastic and rust. All that is gone and a patch put in there.
Image

Hood Pins isntalled and a patch and some rot - Rot= Lightweight. YAY
Image

Another shot of the RF fender a patch there too.
Image

LF Fender
Image

LF Fender Close up - Some lightening down at the bottom, and stickers cover up rot. Hey stickers are lighter and eaiser than sheet meatal and welding!
Image

Battery and tray are gone (well battery is in trunk)
Image

Lightweight Steering box and adapter and Lighwight Master.
Image

Rot Shot 1
Image

Rot Shot 2
Image

Rot shot 3 - If it's not there, it's not adding weight to the car!
Image

Hood LAtch and associated supports gone.
Image

Dash Stripped
Image

Frame Got Boxed on the Drvers Side
Image

RF Floor Patches
Image

Rocker / Floor Patch
[img]http://i299.photobucket.com/albums/mm291/hyperpack/P706021
3.jpg[/img]

LR Wheel House Patch 1
Image

LR Wheel Haous Patch 2
Image

RR Quarter Patch / Wheelhouse Enlargement
Image

RR Quarter Patch / Wheelhouse Enlargement 2
Image

RR Rocker Patch
Image

LR Trunk / Wheel huse Patch
Image

Battery in trunk
Image

LR Wheel Opening Enlargement in progress / Fuel Filler Block off.
Image

Rear View with vanity Plate and Master Shut off.
Image

_________________
http://www.youtube.com/hyperpack
Image


Top
   
PostPosted: Wed Jul 22, 2009 11:16 am 
Offline
Supercharged
User avatar

Joined: Sat Nov 27, 2004 8:03 pm
Posts: 8977
Location: IRWIN PA
Car Model:
It took about a week, but I did the Spring relocation kit etc. and Finally got the Hard lines - Fuel / Rear brake ran to the back. The 8 3/4 is in there with a 4.30 Gear a spool and a pinion suubber.

Oh yeah, I have probably removed about 20# of the factory rust proofing so far.. and that's just on 1/2 the car. It's amazing waht a propane torch and a putty knife will do to old rustproofing.


Big bolt pattern in the back now.
Image

That looks better than the 7.25 and I use stock springs a snubber and air shocks to control the launches. - Simple.
Image

Left Rear Frame rail and Spring relocation - I had to to some major structural work on this rail.. It was really weak.
Image

LR Inboard spring kit.
Image

Swap meet Pinion snubber and Brand new rear brake line.
Image

_________________
http://www.youtube.com/hyperpack
Image


Top
   
 Post subject:
PostPosted: Wed Jul 22, 2009 11:44 am 
Offline
Board Sponsor & Moderator
User avatar

Joined: Mon Oct 21, 2002 11:08 am
Posts: 16447
Location: Blacksburg, VA
Car Model:
Looks awesome, Greg! Hope to run down the track next to this thing next year...

Lou

_________________
Home of Slant6-powered fun machines


Top
   
 Post subject:
PostPosted: Wed Jul 22, 2009 12:22 pm 
Offline
Supercharged
User avatar

Joined: Sat Nov 27, 2004 8:03 pm
Posts: 8977
Location: IRWIN PA
Car Model:
Yes I plan to build the engine and trans over the winter as the budget allows.

I am sourcing a new master cylinder now as I used one from a parts car and it's bad.

I also am getting all the little fittings and adapters togther to connect up the fuel cell and the Line lock.

I still need to attatch the LR wheel house and the LF floor pan. and add the Hurst Shifter and all the eletrics and gauges.


I have some verry Nice Lightweight Wheels and Tires I got off Romeo Furio In June 2009. I just dont have any pics of them on here yet.

It should be alot lighter than the dart!


Greg

_________________
http://www.youtube.com/hyperpack
Image


Top
   
 Post subject:
PostPosted: Wed Jul 22, 2009 1:12 pm 
Offline
Board Sponsor & Moderator
User avatar

Joined: Mon Oct 21, 2002 11:08 am
Posts: 16447
Location: Blacksburg, VA
Car Model:
OK, so my light '66 "Vart" vs. your light '68 Valiant. It's a date next year. I might get mine together by Bristol or Clay City, but not sure.

Lou

_________________
Home of Slant6-powered fun machines


Top
   
 Post subject:
PostPosted: Wed Jul 22, 2009 3:07 pm 
Offline
Supercharged
User avatar

Joined: Sat Nov 27, 2004 8:03 pm
Posts: 8977
Location: IRWIN PA
Car Model:
Is the Vart the copper one in the Garage formley known as Project V?


Greg

_________________
http://www.youtube.com/hyperpack
Image


Top
   
 Post subject:
PostPosted: Wed Jul 22, 2009 3:24 pm 
Offline
Board Sponsor & Moderator
User avatar

Joined: Mon Oct 21, 2002 11:08 am
Posts: 16447
Location: Blacksburg, VA
Car Model:
It's still known as Project V, just playin'. Think I'll slap the head on there tonight. Finished degreeing cam and checked valve-piston clearance last night.

Lou

_________________
Home of Slant6-powered fun machines


Top
   
 Post subject:
PostPosted: Thu Jul 23, 2009 7:24 am 
Offline
Board Sponsor & SL6 Racer
User avatar

Joined: Sun Jul 30, 2006 8:36 pm
Posts: 2432
Location: East Arkansas
Car Model:
Looking Great Greg!!!!
Hope to see it next year at Mason race. Maybe I will have the 66 Dart Wagon race ready by then.
Frank

_________________
Scrapple: Because a mind is a terrible thing to waste.
73 Duster - Race Car
66 Dart Wagon - DD
178" FED
82 D150
All Slant powered


Top
   
 Post subject: 7-24-09
PostPosted: Fri Jul 24, 2009 9:51 am 
Offline
Supercharged
User avatar

Joined: Sat Nov 27, 2004 8:03 pm
Posts: 8977
Location: IRWIN PA
Car Model:
Frank, I would love to see the dart wagon! Sounds like a cool ride - Do you have a tread with pics on it yet??


Here are some more progress shots, and some to be done stuff.


Floor Pan installed - No More Fred flintstone style :)
Image


Line Lock installed - Not functional yet.
Image


Getting rady for the fuel cell - Just have to Fab up some more stuff for the bottom.
Image


Hurst Promatic 2 Shifter to Go In
Image


Racing Seat = Lightweight
Image


Rading Belts
Image

Greg

_________________
http://www.youtube.com/hyperpack
Image


Last edited by Greg Ondayko on Tue Dec 29, 2009 2:43 am, edited 1 time in total.

Top
   
 Post subject:
PostPosted: Fri Jul 24, 2009 10:20 am 
Offline
Turbo EFI
User avatar

Joined: Wed Sep 20, 2006 7:08 pm
Posts: 1114
Location: The Hand
Car Model:
Hi Greg,

Lookin' good! Have you decided on how radicle the motor will be for this ride? Any prethoughts/aspirations on et/mph?

Tom

_________________
11.02 @ 120.56
http://www.youtube.com/watch?v=EAxRmoDgsdY
Chassis dyno
http://www.youtube.com/watch?v=wd6hFGzLJMc


Top
   
 Post subject: Motor Plans.
PostPosted: Fri Jul 24, 2009 12:30 pm 
Offline
Supercharged
User avatar

Joined: Sat Nov 27, 2004 8:03 pm
Posts: 8977
Location: IRWIN PA
Car Model:
Tom, Here's an Idea of what the motor will be.

1 4 Barrel, 500 Carter AFB arb.
Clifford Intake
Unobtained headers
Cam as Indiciated here:
Image
Image


Tilley's Adjustable timing gears and Chain with torrington Bearing.
MSD 6A ignation
NGK Fine Wire Spark Plugs
hardended Oil Pump Gear
Hi Press. Spring in oil pump
Deep pan with baffle
Windage Tray & Scraper
Mike Jeffery Prepared Head With ~1.5 / 1.78 Valves
Weisco / K1 Combination with 3.504 pistons.

Speed, E.T. ??

We will find out!

_________________
http://www.youtube.com/hyperpack
Image


Top
   
 Post subject:
PostPosted: Sat Jul 25, 2009 7:41 am 
Offline
Board Sponsor & SL6 Racer
User avatar

Joined: Sun Jul 30, 2006 8:36 pm
Posts: 2432
Location: East Arkansas
Car Model:
I still havent figured out how to post pics with the Mac yet. My computer skills are really lacking. :D
Frank

_________________
Scrapple: Because a mind is a terrible thing to waste.
73 Duster - Race Car
66 Dart Wagon - DD
178" FED
82 D150
All Slant powered


Top
   
Display posts from previous:  Sort by  
Post new topic  Reply to topic  [ 1220 posts ]  Go to page 1 2 3 4 582 Next

All times are UTC-07:00


Who is online

Users browsing this forum: No registered users and 12 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
Powered by phpBB® Forum Software © phpBB Limited