Slant Six Forum
https://slantsix.org/forum/

"Sir Lancerlot" 61 Lancer Gasser project
https://slantsix.org/forum/viewtopic.php?f=6&t=65225		 Page 1 of 6
Author:  Rob Simmons [ Sun Aug 16, 2020 11:39 am ]
Post subject:  "Sir Lancerlot" 61 Lancer Gasser project
Lancer is loaded up fer a little trip over to Renegade Race Cars in Upton, KY fer a little sumthin’ sumthin’... :twisted:

Attachments:
C9656438-8247-4878-9CED-5C2AE911711E.jpeg
C9656438-8247-4878-9CED-5C2AE911711E.jpeg [ 123.56 KiB | Viewed 5946 times ]
B551511D-50B6-4920-8DA8-05364979FC96.jpeg
B551511D-50B6-4920-8DA8-05364979FC96.jpeg [ 149.65 KiB | Viewed 5946 times ]
Author:  hyper_pak [ Sun Aug 16, 2020 11:43 am ]
Post subject:  Re: Lancer Gasser project
More to follow.....
Author:  Rob Simmons [ Sun Aug 16, 2020 2:46 pm ]
Post subject:  Re: Lancer Gasser project
Always... :roll: :lol:
Author:  wvenable [ Sun Aug 16, 2020 5:39 pm ]
Post subject:  Re: Lancer Gasser project
:D :D :D
Author:  Team Green [ Sun Aug 16, 2020 5:59 pm ]
Post subject:  Re: Lancer Gasser project
What a great start for a H or I/G SEGA car. Those Lancers sure make good looking race cars! I'm thinking boat flake green for the color.

Mark
Author:  sixinthehead [ Sun Aug 16, 2020 7:20 pm ]
Post subject:  Re: Lancer Gasser project
Please tell me it will have an altered wheelbase 8)
It was an unattainable dream of mine for the 61 I had - it needed floors and quarters anyway, so...
Author:  Rob Simmons [ Sun Aug 16, 2020 7:37 pm ]
Post subject:  Re: Lancer Gasser project
I ain’t up fer that much AWB surgery on this one just yet.

It’s got the floors cut out & a rusty frame rail, so ... What the heck! Throw a ‘49 Ford axle up under there while yer at it! :twisted:

And Mark, it’s gonna keep the patina it’s got fer now.

I’d hate people thinkin’ I was a copy cat...

Maybe the HA/GR project using the ‘33 Chevy frame will wind up green... :lol:
Author:  Old6rodder [ Sun Aug 16, 2020 9:20 pm ]
Post subject:  Re: Lancer Gasser project
8)
Author:  sixinthehead [ Mon Aug 17, 2020 4:42 am ]
Post subject:  Re: Lancer Gasser project
Hear me out:
Imagine if the Ramchargers made a High & Mighty 2.0 using a Lancer, with the Slant getting the full calliope treatment.

You're welcome.
Author:  Rob Simmons [ Mon Aug 17, 2020 4:48 am ]
Post subject:  Re: Lancer Gasser project
You got some cool ideas Joe. I’ll give ya that! :mrgreen:
Author:  Greg Ondayko [ Mon Aug 17, 2020 6:37 am ]
Post subject:  Re: Lancer Gasser project
shouldn't it be a High And mighty 2.25?


Greg
Author:  Dart270 [ Mon Aug 17, 2020 7:18 am ]
Post subject:  Re: Lancer Gasser project
Wonder how it would do in an autoX? :P

Lou
Author:  Greg Ondayko [ Mon Aug 17, 2020 8:44 am ]
Post subject:  Re: Lancer Gasser project
it would need wheelie Bars.

on


all


4 corners.

Greg
Author:  Rob Simmons [ Thu Aug 27, 2020 9:10 am ]
Post subject:  Re: Lancer Gasser project
I’m having some issues figuring out the front axle (told it was a ‘49 Ford, but apparently ain’t...)

But here is a little mock up Craig sent me for some inspiration.

Attachments:
3E57D7D4-3674-4492-B604-E58048F9721B.jpeg
3E57D7D4-3674-4492-B604-E58048F9721B.jpeg [ 105.16 KiB | Viewed 5780 times ]
Author:  Greg Ondayko [ Thu Aug 27, 2020 10:05 am ]
Post subject:  Re: Lancer Gasser project
¿Are you Mocking Me?


Maybe it's a mockumentary...

Have fun with it.

Did A100's have a solid front axle?? Keep it all mopar.

Greg
Page 1 of 6 All times are UTC-07:00
Powered by phpBB® Forum Software © phpBB Limited
https://www.phpbb.com/