Slant *        6        Forum
Home Home Home
The Place to Go for Slant Six Info!
Click here to help support the Slant Six Forum!
It is currently Fri Feb 23, 2024 4:11 pm

All times are UTC-08:00




Post new topic  Reply to topic  [ 6 posts ] 
Author Message
PostPosted: Fri Feb 02, 2024 6:42 am 
Offline
Supercharged
User avatar

Joined: Sat Nov 27, 2004 8:03 pm
Posts: 8914
Location: IRWIN PA
Car Model:
Hello, I need a set of 2 Side bearing adjuster locks for an 8 3/4" axle. It is the part that goes on the bearing adjusters in the differential and locks in the gear lash. Not to be confused the Right Axle Adjuster Locking Pawl. - I do not need that part.

Thanks,

Greg

_________________
http://www.youtube.com/hyperpack
Image


Top
   
PostPosted: Fri Feb 09, 2024 5:25 pm 
Offline
3 Deuce Webber
User avatar

Joined: Wed Jan 04, 2006 11:31 am
Posts: 57
Location: St louis MO
Car Model: A couple slant six mopars and other mopars
I could not find one last time I was building a rear end. So I just made one from a scrap piece of flat steel.


Top
   
PostPosted: Fri Feb 09, 2024 6:29 pm 
Offline
SL6 Racer & Moderator
User avatar

Joined: Sat Oct 19, 2002 12:06 pm
Posts: 8387
Location: Silver Springs, Fl.
Car Model:
Greg Ondayko wrote:
Hello, I need a set of 2 Side bearing adjuster locks for an 8 3/4" axle. It is the part that goes on the bearing adjusters in the differential and locks in the gear lash. Not to be confused the Right Axle Adjuster Locking Pawl. - I do not need that part.

Thanks,

Greg

How about Dr. Diff? I got some 8 3/4 rear "T" bolts from him, that weren't listed online. Send him a message.

_________________
Charrlie_S
65 Valiant 100 2dr post 170 turbo
66 Valiant Signet 225 nitrous
64 Valiant Signet
64 Valiant 4dr 170


Top
   
PostPosted: Fri Feb 09, 2024 7:14 pm 
Offline
Supercharged
User avatar

Joined: Sat Nov 27, 2004 8:03 pm
Posts: 8914
Location: IRWIN PA
Car Model:
Charrlie_S wrote:
Greg Ondayko wrote:
Hello, I need a set of 2 Side bearing adjuster locks for an 8 3/4" axle. It is the part that goes on the bearing adjusters in the differential and locks in the gear lash. Not to be confused the Right Axle Adjuster Locking Pawl. - I do not need that part.

Thanks,

Greg

How about Dr. Diff? I got some 8 3/4 rear "T" bolts from him, that weren't listed online. Send him a message.


Yes, amazingly, He does not have them, but he did give me a lead on a source. Have yet to follow up on it yet.

_________________
http://www.youtube.com/hyperpack
Image


Top
   
PostPosted: Sun Feb 11, 2024 5:00 am 
Offline
Board Sponsor & Moderator
User avatar

Joined: Mon Oct 21, 2002 11:08 am
Posts: 16398
Location: Blacksburg, VA
Car Model:
Why not just make them? You could do that with your ground electrode tied behind your back...

Lou

_________________
Home of Slant6-powered fun machines


Top
   
PostPosted: Sun Feb 11, 2024 7:03 am 
Offline
Supercharged
User avatar

Joined: Sat Nov 27, 2004 8:03 pm
Posts: 8914
Location: IRWIN PA
Car Model:
Dart270 wrote:
Why not just make them? You could do that with your ground electrode tied behind your back...

Lou



Yes, that is a possibility too. I did not want to devote time to fabbing these little doodads.

Big Charles may have a deal lined up for me.

we shall see.

Greg

_________________
http://www.youtube.com/hyperpack
Image


Top
   
Display posts from previous:  Sort by  
Post new topic  Reply to topic  [ 6 posts ] 

All times are UTC-08:00


Who is online

Users browsing this forum: No registered users and 2 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
Powered by phpBB® Forum Software © phpBB Limited