Slant *        6        Forum
Home Home Home
The Place to Go for Slant Six Info!
Click here to help support the Slant Six Forum!
It is currently Tue Jan 19, 2021 10:55 am

All times are UTC-08:00




Post new topic  Reply to topic  [ 12 posts ] 
Author Message
PostPosted: Sun Nov 22, 2020 6:17 pm 
Offline
Supercharged
User avatar

Joined: Sat Nov 27, 2004 8:03 pm
Posts: 6495
Location: IRWIN PA
Car Model:
Hello, Looking for a 65-67 B Body Rear end Housing. Pereferably within 3 Hours of Irwin PA.

Greg

_________________
Greg Ondayko
http://www.youtube.com/hyperpack
Image


Last edited by Greg Ondayko on Thu Nov 26, 2020 3:57 am, edited 1 time in total.

Top
   
PostPosted: Sun Nov 22, 2020 10:02 pm 
Offline
EFI Slant 6
User avatar

Joined: Fri Apr 21, 2006 4:32 pm
Posts: 363
Location: California
Car Model: 1964 Dart GT
Got one, but about 2900 miles away in San Jose Ca. Let me know if you may be interested.


Top
   
PostPosted: Mon Nov 23, 2020 4:52 am 
Offline
Board Sponsor
User avatar

Joined: Fri Nov 01, 2002 5:02 pm
Posts: 1737
Location: Waterloo, Iowa
Car Model: '23 T-bucket
Hmmmm. A housing, by itself, (no axles or center section), shouldn't weight very much. A narrow pallet, some blocks and lag screws through the spring perches, and it would be shippable. Does Amtrak do freight?

Just a thought.....Roger


Top
   
PostPosted: Mon Nov 23, 2020 5:22 am 
Offline
Turbo EFI
User avatar

Joined: Mon Jan 12, 2015 5:55 am
Posts: 1109
Location: Brightwood, VA
Car Model: 1965 Plymouth Belvedere I
Wha;t are you working on now?

_________________
-MattMan
Strive for Excellence, not Perfection.
Image


Top
   
PostPosted: Mon Nov 23, 2020 6:55 am 
Offline
Supercharged
User avatar

Joined: Sat Nov 27, 2004 8:03 pm
Posts: 6495
Location: IRWIN PA
Car Model:
Badvert65 wrote:
Wha;t are you working on now?


Grüne Hölle Dart.

The '69 B Body rear is a skosh too wide. - Tire rubbing is sometimes a bit much.. by my calculations going from the 68-70 B Rear housing to the 65-67 B Body Rear Housing will give me 3/8" More clearance per side.

I really don't want to get into cutting the wheel wells but May have to resort to it later.

The shipping from California would be more than the housing cost I am sure.

I have a few leads within 3 hours of here.

Greg

_________________
Greg Ondayko
http://www.youtube.com/hyperpack
Image


Top
   
PostPosted: Mon Nov 23, 2020 9:40 am 
Offline
Turbo EFI
User avatar

Joined: Mon Jan 12, 2015 5:55 am
Posts: 1109
Location: Brightwood, VA
Car Model: 1965 Plymouth Belvedere I
You don't want to look for an A body axle?

_________________
-MattMan
Strive for Excellence, not Perfection.
Image


Top
   
PostPosted: Mon Nov 23, 2020 9:42 am 
Offline
Supercharged
User avatar

Joined: Sat Nov 27, 2004 8:03 pm
Posts: 6495
Location: IRWIN PA
Car Model:
Not really, Then I will be adding a bunch of spacer to make it work.

The b Body stuff is about $500-$800 Cheaper too.

Greg

_________________
Greg Ondayko
http://www.youtube.com/hyperpack
Image


Top
   
PostPosted: Mon Nov 23, 2020 4:29 pm 
Offline
Turbo EFI
User avatar

Joined: Mon Jan 12, 2015 5:55 am
Posts: 1109
Location: Brightwood, VA
Car Model: 1965 Plymouth Belvedere I
Hey Greg, you might have to call to see what year these are for.
https://pittsburgh.craigslist.org/pts/d/pittsburgh-mopar-body-rear-housing/7232826005.html
https://pittsburgh.craigslist.org/pts/d/washington-mopar-doge-or-plymouth-875/7234788908.html

_________________
-MattMan
Strive for Excellence, not Perfection.
Image


Top
   
PostPosted: Mon Nov 23, 2020 8:52 pm 
Offline
Supercharged
User avatar

Joined: Sat Nov 27, 2004 8:03 pm
Posts: 6495
Location: IRWIN PA
Car Model:
Thanks matt,

I will have to look into those.

Greg

_________________
Greg Ondayko
http://www.youtube.com/hyperpack
Image


Top
   
PostPosted: Wed Nov 25, 2020 7:56 am 
Offline
EFI Slant 6
User avatar

Joined: Sat Jun 09, 2007 7:20 am
Posts: 273
Location: Portland, Or.
Car Model: '64 Valiant Convertible
Are there pictures or dimensions I can refer to? I have a housing of unknown origin....

Center to center on the spring perches? End to end of the flanges?

Whatever is available would be helpful.

Thanks for any help!

Neil


Top
   
PostPosted: Wed Nov 25, 2020 8:37 am 
Offline
Supercharged
User avatar

Joined: Sat Nov 27, 2004 8:03 pm
Posts: 6495
Location: IRWIN PA
Car Model:
Neil, Check this ...
https://www.forabodiesonly.com/mopar/th ... st.365494/


Greg

_________________
Greg Ondayko
http://www.youtube.com/hyperpack
Image


Top
   
PostPosted: Thu Nov 26, 2020 3:56 am 
Offline
Supercharged
User avatar

Joined: Sat Nov 27, 2004 8:03 pm
Posts: 6495
Location: IRWIN PA
Car Model:
Part found.

Thanks All!


Greg

_________________
Greg Ondayko
http://www.youtube.com/hyperpack
Image


Top
   
Display posts from previous:  Sort by  
Post new topic  Reply to topic  [ 12 posts ] 

All times are UTC-08:00


Who is online

Users browsing this forum: No registered users and 1 guest


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
Powered by phpBB® Forum Software © phpBB Limited