Slant Six Forum
https://slantsix.org/forum/

NEED SLANT 6 CLUTCH DUST COVER
https://slantsix.org/forum/viewtopic.php?f=7&t=66621
Page 1 of 1

Author:  k7seh [ Mon Jun 06, 2022 6:28 pm ]
Post subject:  NEED SLANT 6 CLUTCH DUST COVER

My D100 is missing the clutch dust cover between the engine block and the 4-Speed manual transmission. If you have a spare laying around you can let go please contact me to make arrangements. Thanx for reading.

Author:  Greg Ondayko [ Tue Jun 07, 2022 1:41 pm ]
Post subject:  Re: NEED SLANT 6 CLUTCH DUST COVER

What bell housing or Flywheel size do you have there?

Some of the covers are she same as slant 6 car applications ... yet some are truck specific.


Greg

Author:  k7seh [ Mon Jul 18, 2022 11:51 am ]
Post subject:  Re: NEED SLANT 6 CLUTCH DUST COVER

Sorry for taking so long to respond. According to the factory assembly papers I have an 11" clutch.

Author:  Greg Ondayko [ Tue Jul 19, 2022 3:02 pm ]
Post subject:  Re: NEED SLANT 6 CLUTCH DUST COVER

Then you need the dust cover for the truck bell housing... 11" clutch.

It may be the same as other dodge trucks of the era with an 11" clutch and an LA or B/ RB engine.


Greg

Author:  k7seh [ Sat Jul 30, 2022 8:40 am ]
Post subject:  Re: NEED SLANT 6 CLUTCH DUST COVER

Is there a chance that the 318 11" clutch dust cover might fit the slant 6? I have one of those wrecking yards you see off in the distance from the highway near me and they have a few trucks that have V8's in them that I can look into if the dust cover fite either engine. They say they have slant 6's, but I could not find one when I searched the yard.

Author:  Greg Ondayko [ Sat Jul 30, 2022 1:05 pm ]
Post subject:  Re: NEED SLANT 6 CLUTCH DUST COVER

Possibly. The 318 is the LA engine I referenced in the above post.

Greg

Page 1 of 1 All times are UTC-07:00
Powered by phpBB® Forum Software © phpBB Limited
https://www.phpbb.com/