Slant *       6       Forum
Home Home Home
The Place to Go for Slant Six Info!
Click here to help support the Slant Six Forum!
It is currently Fri May 02, 2025 7:04 pm

Unanswered topics | Active topics


» » Tech Q & A » Old Message Board

All times are UTC-07:00



Forum locked  This topic is locked, you cannot edit posts or make further replies.  Page 1 of 1
  [ 10 posts ] 
  Print view Previous topic | Next topic 
Author Message
Scott Woebcke
PostPosted: Sat Oct 06, 2001 9:51 am 
I've always been fond of non practical MG's and Triumphs. I love the styling of the little roadster. I saw website where a crazy guy put a chevy 327 in a Spitfire another guy had an Olds 215 transplanted. I'm thinking get the reliability of the slant six in a cool british sports car. What do you suppose would be involved in doing something like this. I thinkt the slant is practically the perfect size. Although I'm sure i'd be in over my head doing suspension and frame modifications. But imagine pushing so many horsepower in such a light car. Hehehe and imagine the dual exhaust sound coming from such a little mobile.
Top
   
Reply with quote  
Dennis Beattie
PostPosted: Sat Oct 06, 2001 10:01 pm 
Quote:
:Scott


I share your appreciation of British Sports cars, but a /6 isn't the best engine choice. First the length will be a problem in most engine bays. Then the weight will really mess up the handling. even with the right springs, the weight will all be in the front. The Buick V6 is a common choice for this, and they makes kits for a few cars (Triumph TR 7, search "John's Cars"). It is short, relatively light and reliable.

I've always been fond of non practical MG's and
Triumphs. I'm thinking get the reliability of the slant six in a cool British sports car. What do you suppose would be involved in doing something like this.

dbeattie@mb.sympatico.ca
Top
   
Reply with quote  
DusterIdiot
PostPosted: Sat Oct 06, 2001 10:51 pm 
Quote:
: I've always been fond of non practical MG's and
: Triumphs. I'm thinking get the reliability of
: the slant six in a cool British sports car.
: What do you suppose would be involved in
: doing something like this.


I really would like to see a hi-po slant under
the hood of say an XJ-6 Jag...
I already know they have kits to put the Chevy 350 in there and it's cheaper, but it would be...
"sleeker"...

Hey and I could wear an english hat and talk with a South Wales Detroit accent... :)

-D.Idiot


res0aus2@verizon.net
Top
   
Reply with quote  
Scott Woebcke
PostPosted: Sun Oct 07, 2001 8:11 am 
Thats a damn good idea. My uncle has a Jaguar X-J6 in his garage, he couldn't get it running. What kind of modifications do you think I would have to do for it to work. There looks to be plenty of room in the engine compartment. If I could keep the suspension, I'd be in for a smooth ride.
Top
   
Reply with quote  
DusterIdiot
PostPosted: Sun Oct 07, 2001 9:13 am 
Quote:
: Thats a damn good idea. My uncle has a Jaguar
: X-J6 in his garage, he couldn't get it
: running. What kind of modifications do you
: think I would have to do for it to work.
: There looks to be plenty of room in the
: engine compartment. If I could keep the
: suspension, I'd be in for a smooth ride.


The 350 kit is a cheap and easy motor mount and crossmember mod, by all understanding from my uncle it's a pull the motor install the kit and drop the 350/THM350 into place.
For say a slant with a 904, you'll have to put the motor/tranny into place and see where all the bolts fit up, and sketch out some adapters to fabricate and install (maybe weld...).
make sure you do your motor items outside the bay, as no has any idea if you might be able to reach even the sparkplugs...
Also a pep up will be in order since a Jag is like 3800-4000 lbs due to "luxury" items and padding... "I say say old chap..more power *rrrrrr*"

-D.Idiot


res0aus2@verizon.net
Top
   
Reply with quote  
Doctor Dodge (Doug Dutra)
PostPosted: Sun Oct 07, 2001 9:49 am 
Quote:
: I've always been fond of non practical MG's and
: Triumphs. I love the styling of the little
: roadster. I saw website where a crazy guy
: put a chevy 327 in a Spitfire another guy
: had an Olds 215 transplanted. I'm thinking
: get the reliability of the slant six in a
: cool british sports car. What do you suppose
: would be involved in doing something like
: this. I thinkt the slant is practically the
: perfect size. Although I'm sure i'd be in
: over my head doing suspension and frame
: modifications. But imagine pushing so many
: horsepower in such a light car. Hehehe and
: imagine the dual exhaust sound coming from
: such a little mobile.


My older brother is into MGs and AH Sprites, he has a few "rollers" sitting around so I took some measurments, I would fit but you would have to remove most of the passenger side "footwell" and convert it into engine bay. Looked to me that you could get some decent engine set-back.

Suspension and rear axle would need up-grading, basically a "ground-up", one-off, special car project. (read: ton's of time) You would end-up with a super light car and a great power to weiight ratio, I was thinking a "tweeked" 170 with a 5 speed would be the ticket. (or many tickets, depending on how you drive)
DD
Top
   
Reply with quote  
Scott Woebcke
PostPosted: Sun Oct 07, 2001 10:29 am 
Well I was not thinking straight when I posted...The Jag would be fun idea but there is too much smog to worry about here in CA. I can't stand slants with smog gear scattered about. Although its really not that much clutter. Still not fun to deal with. What about putting a Mazda Rotary Turbo in an A body...I know jap parts in a muscle car...but rotary has the character of a Slant...Tough motors, zippy.
Top
   
Reply with quote  
DusterIdiot
PostPosted: Sun Oct 07, 2001 12:39 pm 
. What about putting a Mazda Rotary
Quote:
: Turbo in an A body...I know jap parts in a
: muscle car...but rotary has the character of
: a Slant...Tough motors, zippy.


I've worked on my buddy's RX-7 simple easy to tune up, zippy, but light cars too (the early 80's models only weigh like 2100 lbs).
It's neat they come with a 4-barrel Throttle body/carb too...

Might make a cool experimant in say a 61 Lancer.

-D.Idiot


res0aus2@verizon.net
Top
   
Reply with quote  
dschumers
PostPosted: Sun Oct 07, 2001 12:45 pm 
Quote:
: . What about putting a Mazda Rotary
:
: I've worked on my buddy's RX-7 simple easy to
: tune up, zippy, but light cars too (the
: early 80's models only weigh like 2100 lbs).
: It's neat they come with a 4-barrel Throttle
: body/carb too...
:
: Might make a cool experimant in say a 61
: Lancer.
:
: -D.Idiot


Not to mention that rotaries sound really cool! (Especially with open exhaust!)

aschumers@aol.com
Top
   
Reply with quote  
mike
 Post subject: Check this out!!!!!
PostPosted: Mon Oct 08, 2001 5:20 pm 
You Probably won't want to put in a slant in an MGb. It is just to long. I already thought about it. I satrted last year on an mgb w/ a 302. Had it almost ready but had it was traded out of hte toy box for our 79 Custom 100 with /6.
MG had to redesign the MGb to accomadate the I 6 they put in in 67 or 68. Here is a link with MGB to TR to even the wankel . Mike <A HREF="http://members.aol.com/danmas/examples. ... les.htm</A>


arabmem@hiwaay.net
Top
   
Reply with quote  
Display posts from previous:  Sort by  
Forum locked  This topic is locked, you cannot edit posts or make further replies.  Page 1 of 1
  [ 10 posts ] 

» » Tech Q & A » Old Message Board

All times are UTC-07:00

Who is online

Users browsing this forum: No registered users and 0 guests

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
Powered by phpBB® Forum Software © phpBB Limited