Slant *       6       Forum
Home Home Home
The Place to Go for Slant Six Info!
Click here to help support the Slant Six Forum!
It is currently Thu Nov 28, 2024 9:44 pm

Unanswered topics | Active topics


» » Tech Q & A » Engine

All times are UTC-08:00



Post new topic  Reply to topic  Page 2 of 2
  [ 20 posts ]  Go to page Previous 1 2
  Print view Previous topic | Next topic 
Author Message
slantsixbob
 Post subject:
PostPosted: Tue Jul 12, 2011 1:43 am 
Offline
EFI Slant 6
User avatar

Joined: Sat Apr 26, 2008 4:44 pm
Posts: 347
Location: salem oregon
Car Model:
Quote:
I just can't wrap my head around a "mechanic" setting valve lash on a slant 6 with the engine off. I suppose you COULD, but the (best) way to get the most accurate adjustment is with the engine at hot idle.

Besides, if it's not running during the lash adjustment, you don't get the "satisfaction" of hearing the clattering disappear as you go down the line.
How to best set the valve lash on a SL6 has been argued a lot.
I've had times where the valve lash has been off enough that the engine won't stay running and a cold lash is needed just to get it to at least run rough. not that its proper way to adjust the lash, a cold lash adjustment just has its time and place.
Top
   
Reply with quote  
2kids
 Post subject:
PostPosted: Wed Jul 13, 2011 3:07 pm 
Offline
4 BBL ''Hyper-Pak''

Joined: Wed Mar 10, 2010 8:22 am
Posts: 33
Car Model:
Quote:
Quote:
Quote:
Why not loosen that bolt as before? and see if it fixes the problem.
Did you re-check the valve lash after tightening the head bolt?
Better yet...
Warm engine, retorque the head & re-adjust the valve lash... to the loose side of the settings.
DD
Hi Doc,
Thanks! I just spoke with my mechanic and we had come to a similar conclusion that you're saying. I just found out that his order of events was that he tightened the head bolt, then adjusted the valves and then attempted to start the car. I had initially thought he went straight from tightening the head bold to starting the car..... so it sure seems like the valves could be the ticket. I am hoping!
Hi Doc,
Well backing off on the valves helped me at least get an idle back! Pretty rough and gutless when I step on the peddle.

I am now starting to think the head gasket is messed up....fair amount of oil right back by that left rear head - enough to drip down to the ground. GRRRRR.

Thanks again for the help.
Darcy
Top
   
Reply with quote  
2kids
 Post subject:
PostPosted: Thu Jul 14, 2011 3:12 pm 
Offline
4 BBL ''Hyper-Pak''

Joined: Wed Mar 10, 2010 8:22 am
Posts: 33
Car Model:
Anyone want to recommend a head gasket brand to me?

Thanks!
Top
   
Reply with quote  
SurfRodder
 Post subject:
PostPosted: Thu Jul 14, 2011 9:39 pm 
Offline
3 Deuce Weber
User avatar

Joined: Tue Dec 18, 2007 9:56 pm
Posts: 58
Car Model:
I think most people just run standard Felpro gaskets in street motors... there are a few copper ones out there for the more extreme builds.
Top
   
Reply with quote  
Brussell
 Post subject:
PostPosted: Sat Jul 16, 2011 3:54 am 
Offline
EFI Slant 6

Joined: Sun May 23, 2010 8:38 pm
Posts: 454
Car Model:
Felpro (y).

I think you should check to see if the deck/head needs a skim, could possibly use this chance to bump up the compression.
Top
   
Reply with quote  
Display posts from previous:  Sort by  
Post new topic  Reply to topic  Page 2 of 2
  [ 20 posts ]  Go to page Previous 1 2

» » Tech Q & A » Engine

All times are UTC-08:00

Who is online

Users browsing this forum: Ahrefs [Bot], Bing [Bot], Google [Bot] and 9 guests

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
Powered by phpBB® Forum Software © phpBB Limited