Slant *        6        Forum
Home Home Home
The Place to Go for Slant Six Info!
Click here to help support the Slant Six Forum!
It is currently Fri Dec 06, 2024 9:46 pm

All times are UTC-08:00




Post new topic  Reply to topic  [ 13 posts ] 
Author Message
PostPosted: Wed Oct 18, 2023 5:32 pm 
Offline
1 BBL (New)

Joined: Thu Sep 28, 2023 2:45 pm
Posts: 9
Location: Near LAX airport
Car Model: 1964 Dodge Dart GT Convertible
OK I have a 1964 dodge dart that has a 1971 engine in it (5 freeze plugs)

I’m rebuilding a block that’s a 1963 block ( 3 freeze plugs)
My question is are the motor mount brackets different for these year blocks if so can someone show me what 1963 motor mount brackets look like …. and ….. if they have any for sale Send me your price.
At least a picture would help so I’m sure of what I need in the swap.

Thanks


Top
   
PostPosted: Wed Oct 18, 2023 6:40 pm 
Offline
SL6 Racer & Moderator
User avatar

Joined: Sat Oct 19, 2002 12:06 pm
Posts: 8716
Location: Silver Springs, Fl.
Car Model:
The motor mount brackets are the same 1963 to 1966 (I don't remember about 1960-1962) and interchange on any year slant six engine.
One thing you need to be aware of, is the different size of the crank "pocket" between the 1971 engine and the 1963 engine. Depending on the year and type transmission this could/might be an issue. What are you using for a trans?

_________________
Charrlie_S
65 Valiant 100 2dr post 170 turbo
66 Valiant Signet 170 nitrous
64 Valiant Signet
64 Valiant 4dr 170
64 Valiant 4dr 225


Top
   
PostPosted: Wed Oct 18, 2023 7:20 pm 
Offline
1 BBL (New)

Joined: Thu Sep 28, 2023 2:45 pm
Posts: 9
Location: Near LAX airport
Car Model: 1964 Dodge Dart GT Convertible
Thanks Charlie
Existing in the car is a 1971 block so I thought the motor mounts would be different for the block that I intend to install which is a 1963 block the new transmission is a 1965 and the end pocket of the crank Should not be a problem. So as I’m looking I would like make sure I get the right brackets before I try to make it fit.

Pictures would be helpful to see the difference.

And since I will need to find a set if someone has a fair price including shipping to Los Angeles please message me!


Top
   
PostPosted: Thu Oct 19, 2023 12:36 am 
Offline
Board Sponsor & Moderator
User avatar

Joined: Mon Oct 21, 2002 11:08 am
Posts: 16796
Location: Blacksburg, VA
Car Model:
If the 71 engine is already in the car and not sitting at some funny angle or with jacked-up/modified mount brackets, then you already have the 63-66 engine brackets on that 71 block. Just swap the brackets onto the new block and you're done! The mount "bosses" and bolt holes on the block are the same for ALL Slant 6 engines, from 1959 to 1987 and 170 to 225.

Lou

_________________
Home of Slant6-powered fun machines since 1988


Top
   
PostPosted: Thu Oct 19, 2023 4:13 am 
Offline
SL6 Racer & Moderator
User avatar

Joined: Sat Oct 19, 2002 12:06 pm
Posts: 8716
Location: Silver Springs, Fl.
Car Model:
As Lou said. Just remove the brackets from the engine that is in the car and put them on the replacement engine.
Make sure the crank pocket and converter snout match, and you have a 66/older oil pan.

_________________
Charrlie_S
65 Valiant 100 2dr post 170 turbo
66 Valiant Signet 170 nitrous
64 Valiant Signet
64 Valiant 4dr 170
64 Valiant 4dr 225


Top
   
PostPosted: Thu Oct 19, 2023 5:46 am 
Offline
Board Sponsor & Moderator
User avatar

Joined: Mon Oct 21, 2002 11:08 am
Posts: 16796
Location: Blacksburg, VA
Car Model:
If there are no rubbing/pressure/touch points from the oilpan hitting the frame, torsion bar, etc, then you can use that same oilpan and pickup on the replacement engine. Likely it is a 64 pan if nothing is touching.

Lou

_________________
Home of Slant6-powered fun machines since 1988


Top
   
PostPosted: Thu Oct 19, 2023 9:07 am 
Offline
1 BBL (New)

Joined: Thu Sep 28, 2023 2:45 pm
Posts: 9
Location: Near LAX airport
Car Model: 1964 Dodge Dart GT Convertible
OK that’s great. Helps to know that but at the same time I’m building a rolling cart out of an old K frame that I wanna bolt the new engine to so I’ll be able to do run tests and refinement before installing it into the car so I need a second set of mount brackets to bolt to the block of I can just make something that works for my rolling cart. I’m going to the Mopar spring fling swap meet on Sat and hope to find a set or I’ll post in the wanted page and see what I find. Thanks again for more knowledge!


Top
   
PostPosted: Thu Oct 19, 2023 10:23 am 
Offline
Board Sponsor & Moderator
User avatar

Joined: Mon Oct 21, 2002 11:08 am
Posts: 16796
Location: Blacksburg, VA
Car Model:
I bet you can get a set on this site pretty easily. Have fun at Fall Fling! I went to that a few times when I lived in Pasadena and W. LA.

Lou

_________________
Home of Slant6-powered fun machines since 1988


Top
   
PostPosted: Thu Oct 19, 2023 11:19 am 
Offline
1 BBL (New)

Joined: Thu Sep 28, 2023 2:45 pm
Posts: 9
Location: Near LAX airport
Car Model: 1964 Dodge Dart GT Convertible
Thanks Lou! I kinda figured this place was the real place to look without over pricing like eBay felt like to me.


Top
   
PostPosted: Thu Oct 19, 2023 12:13 pm 
Offline
Board Sponsor & Moderator
User avatar

Joined: Mon Oct 21, 2002 11:08 am
Posts: 16796
Location: Blacksburg, VA
Car Model:
Pretty sure I have a spare set, if you don't find something locally or easily...

_________________
Home of Slant6-powered fun machines since 1988


Top
   
PostPosted: Thu Oct 19, 2023 3:45 pm 
Offline
Board Sponsor & Contributor

Joined: Thu Oct 31, 2002 5:39 pm
Posts: 24452
Location: North America
Car Model:
Quote:
The motor mount brackets are the same 1963 to 1966 (I don't remember about 1960-1962)
Mounts and brackets are '62-'66. The '60-'61 mounts (and K-frames) are different, and the other groups are '67-'72 and '73-'76.

_________________
一期一会
Too many people who were born on third base actually believe they've hit a triple.

Image


Top
   
PostPosted: Thu Oct 19, 2023 4:26 pm 
Offline
SL6 Racer & Moderator
User avatar

Joined: Sat Oct 19, 2002 12:06 pm
Posts: 8716
Location: Silver Springs, Fl.
Car Model:
Thanks, Dan. I haven't done much with the 60-62 "A" bodies, and nothing in the last 30+ years and my memory is not what it used to be.

_________________
Charrlie_S
65 Valiant 100 2dr post 170 turbo
66 Valiant Signet 170 nitrous
64 Valiant Signet
64 Valiant 4dr 170
64 Valiant 4dr 225


Top
   
PostPosted: Thu Oct 19, 2023 8:43 pm 
Offline
1 BBL (New)

Joined: Thu Sep 28, 2023 2:45 pm
Posts: 9
Location: Near LAX airport
Car Model: 1964 Dodge Dart GT Convertible
Quote:
Pretty sure I have a spare set, if you don't find something locally or easily...
Thanks! I’ll let ya know…


Top
   
Display posts from previous:  Sort by  
Post new topic  Reply to topic  [ 13 posts ] 

All times are UTC-08:00


Who is online

Users browsing this forum: No registered users and 0 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
Powered by phpBB® Forum Software © phpBB Limited