| Slant Six Forum https://slantsix.org/forum/ |
|
| Poly Engine Mounts for 62-66 cars, Group Buy? - please read https://slantsix.org/forum/viewtopic.php?t=36745 |
Page 8 of 9 |
| Author: | Polara1974 [ Thu Feb 04, 2010 9:18 am ] |
| Post subject: | |
As long I can check from this picture http://i77.photobucket.com/albums/j59/r ... 000314.jpg Looking at the motor mount on the left, they look like to have no offset between the upper and lower bolt, or maybe a very small offset. But sure not like this:  Check the one on the left of the picture. Although some additional pics of the poly mount from different angles for re-confirmation will help. |
|
| Author: | SlantSixDan [ Thu Feb 04, 2010 9:21 am ] |
| Post subject: | |
The question that may make it less important how much offset there is: How long are the slotted holes into which these studs go? |
|
| Author: | Fopar [ Thu Feb 04, 2010 9:44 am ] |
| Post subject: | |
Here are pictures of the mount in question; http://i77.photobucket.com/albums/j59/r ... 000316.jpg http://i77.photobucket.com/albums/j59/r ... 000317.jpg |
|
| Author: | Polara1974 [ Thu Feb 04, 2010 10:08 am ] |
| Post subject: | |
Fopar thanks for the good pictures!!! Now I can say that I got confused with the previous pics, this motor mounts WORKS for my car too!!! I have a motor mount in hand And looked at the picture and is the very same. So again: I'm IN FOR A SET!!!  Dan can you handle this purchase for on my behalf? |
|
| Author: | SlantSixDan [ Thu Feb 04, 2010 10:13 am ] |
| Post subject: | |
Yep...no problem! |
|
| Author: | HyperValiant [ Sat Feb 20, 2010 9:52 am ] |
| Post subject: | |
I know that Im late to the party but are these motor mounts still available?I would like to get a set for when I convert my 60 Valiant to 62-66 style K frame. Thanks HyperValiant |
|
| Author: | ceej [ Sat Feb 20, 2010 12:08 pm ] |
| Post subject: | |
Johnny is ready to ship mounts! From Johnny: Reminder, here is the web page to post... http://polybushings.com/pages/2303-4.html All that were in the pre-buy got them for $99 a pair. price is now $119 So there we go! They are available in regular hardness of 60 Durameter Poly and Racing application 70 Durameter Poly. Specify what you want when you order. |
|
| Author: | dakight [ Sat Feb 20, 2010 12:34 pm ] |
| Post subject: | |
Is he going to notify us how much we still owe, including shipping? |
|
| Author: | Old6rodder [ Sat Feb 20, 2010 1:45 pm ] |
| Post subject: | |
Yep. Got his email yesterday for mine, and verification of shipping today. |
|
| Author: | dakight [ Sat Feb 20, 2010 3:24 pm ] |
| Post subject: | |
OK, I got his email and everything should be good to go now. |
|
| Author: | Dart270 [ Sat Feb 20, 2010 6:56 pm ] |
| Post subject: | |
Yep, Johnny emailed me yesterday and said he has 12 sets ready with more on the way. Give him a call or email to get yours on the way. Lou |
|
| Author: | NewLancerMan [ Tue Feb 23, 2010 8:03 pm ] |
| Post subject: | Mounts are Ready |
Folks, Johnny has finished the mounts and you should have received an email from him asking for the balance on the mounts. If you did not hear from him, please email him directly at glhs289@hotmail.com Thanks! Menko |
|
| Author: | Matt Cramer [ Wed Feb 24, 2010 8:42 am ] |
| Post subject: | |
Mine just arrived. Now I just need some time to get them in... along with the rest of the project... |
|
| Author: | JLC 64 [ Sat Feb 27, 2010 11:03 pm ] |
| Post subject: | |
I got a paper invoice from him yesterday. It came in the regular USPS mail, so if you don't get an e-mail from him don't worry cause he's got it covered. 
|
|
| Author: | Exner Geek [ Fri Mar 05, 2010 8:03 am ] |
| Post subject: | |
What are the pros and cons of the 60 and 70 harness mounts? I presume the harder ones resist torquing over better, anything else? I am ready to send in my money but don't know what to ask him for. |
|
| Page 8 of 9 | All times are UTC-08:00 |
| Powered by phpBB® Forum Software © phpBB Limited https://www.phpbb.com/ |
|
