Slant Six Forum
https://slantsix.org/forum/

8.8 Rearend Installed
https://slantsix.org/forum/viewtopic.php?t=11774		 Page 2 of 2
Author:  DakotaDon [ Tue Mar 01, 2005 7:57 pm ]
Post subject: 
ok thanks, what are the F to F width of an a body, sorry i didnt see the F to F posted above :)


thanks
Author:  349MagnumRT [ Wed Mar 02, 2005 11:59 am ]
Post subject: 
Looky here:

http://www.moparts.com/Tech/Archive/axle/17.html
Author:  DakotaDon [ Wed Mar 02, 2005 1:09 pm ]
Post subject: 
ok thanks, so if i need to use one in an A-Body it will have to be narrowed, but it might work just fine in A B-body or dakota then

good info
Author:  DakotaDon [ Wed Mar 02, 2005 1:11 pm ]
Post subject: 
ok thanks for the info, so if i need it for an A-bod it will have to be narrowed, But it may work just fine in a B-body or even a Dakota


thanks
Author:  mighty mouse 63 [ Wed Mar 02, 2005 6:10 pm ]
Post subject:  8.8 referance source
I got a new subscription called Muscle magazine (thanks honey) they have a three page spread on the 8.8 and interchangeably, decoding rear
ratios, suggested cost from a salvage yard, measurements/dimensions,
disc-drum variations, drivetrain capability and an application guide by year and model. Good info for anyone interested in such a conversion and not Ford inclined. (like me)!
Author:  DakotaDon [ Wed Mar 02, 2005 7:54 pm ]
Post subject: 
great is it the latest issue?
Author:  mighty mouse 63 [ Thu Mar 03, 2005 9:17 am ]
Post subject: 
The lastest issue it is, has a 340 Duster on the cover. Complete magazine name is Hemmings Muscle Motors.
Author:  kesteb [ Thu Mar 03, 2005 3:48 pm ]
Post subject: 
Quote:
ok thanks, what are the F to F width of an a body, sorry i didnt see the F to F posted above :)
The F to F on an A-body axle is 56.5".
Page 2 of 2 All times are UTC-07:00
Powered by phpBB® Forum Software © phpBB Limited
https://www.phpbb.com/