| Slant Six Forum https://slantsix.org/forum/ |
|
| Bolts instead of Studs https://slantsix.org/forum/viewtopic.php?t=12217 |
Page 2 of 2 |
| Author: | Dennis Weaver [ Tue Mar 15, 2005 4:50 pm ] |
| Post subject: | |
Quote: Cool, gum wrappers work for fuses? Cool! That'd be good to know in a pinch. LOL, usually I just buy fuses but now I get to save some money!
...and burn up your wiring harness.D/W |
|
| Author: | ne_plus_ultra_1 [ Tue Mar 15, 2005 5:17 pm ] |
| Post subject: | |
Yeah, I was just joking really, it's kinda cool that they could work in an emergency though although I suppose you don't really want to start a fire when already in an emergency. Excellent, funny post anyway! |
|
| Author: | argentina-slantsixer [ Tue Mar 15, 2005 8:06 pm ] |
| Post subject: | |
if you wanna get thisgs worst, you can use a wuarter or even better a screw on your fusebox now THAT'S a real emergency. |
|
| Author: | Pyper6970 [ Tue Mar 15, 2005 9:50 pm ] |
| Post subject: | |
Use a bullet in your fusebox, make sure the fusebox is pointed away from your body. When it the shell gets hot, you'll wonder why I say this. |
|
| Author: | sixty4dartgt [ Tue Mar 15, 2005 10:23 pm ] |
| Post subject: | |
I replaced my studs with the ones in the "stainless kit" I bought on e-bay. I only used some anti-seize compound. Anyone see any problem with leaks or the stainless studs? |
|
| Author: | slantvaliant [ Wed Mar 16, 2005 6:16 am ] |
| Post subject: | |
There are occasional galling problems when the studs and nuts are made of the same grade of stainless steel (304, 316, etc). I suspect most of the suppliers have accounted for this in their kits, and vary the grades accordingly but I haven't checked it out yet. |
|
| Page 2 of 2 | All times are UTC-08:00 |
| Powered by phpBB® Forum Software © phpBB Limited https://www.phpbb.com/ |
|