Slant Six Forum
https://slantsix.org/forum/

quick cam question 244 or 252?
https://slantsix.org/forum/viewtopic.php?t=15631		 Page 2 of 2
Author:  carrigan #3 [ Thu Jan 05, 2006 6:39 pm ]
Post subject: 
have any of you guys ever used a Clifford cam at all?
yes, Dan i know they oversell
but i'm curious as to performance effects
Author:  terryx [ Thu Jan 05, 2006 8:18 pm ]
Post subject:  comp can 264
what about this one?

I know it's evil comp cams again but how about its properties

would it make a good street car cam with the super six set up?

would like to keep smooth idel and not loose too much gas mileage?

many thanks for all info


TMna
Author:  sandy in BC [ Thu Jan 05, 2006 8:45 pm ]
Post subject: 
As stated earlier in this thread I run this cam in my car with a Super 6. It is fine. ....Not wonderful or even poor.....its just fine. It idles fine and gas mileage is unchanged.

I suggest you reread this thread and do a search on the site.

Comp Cams is not evil.....they are just not wonderful.
Author:  CStryker [ Thu Jan 05, 2006 11:09 pm ]
Post subject:  Clifford Cams
Quote:
have any of you guys ever used a Clifford cam at all?
yes, Dan i know they oversell
but i'm curious as to performance effects
My uncle taught automotive repair at a vo-tech school for many years, and during a project he put a clifford cam in a slant. He loved it and highly reccomended that I do the same in mine. That being said, his experience was many years ago (he's now retired), and after I told him of their lousy customer service, he understood my reservations. Also, he did not remember what grind the cam he installed was.
Author:  terryx [ Fri Jan 06, 2006 7:35 am ]
Post subject:  264 cam
How about the 264 comp cams?

appart from being made by comp, how do they perform?
Author:  sandy in BC [ Fri Jan 06, 2006 8:04 am ]
Post subject: 
Ok for the 3rd time....nah,,,,,no one can read my posts anyways....

Just posting into a vacuum..........

Oh well.....next he will ask if it will work with a Super 6....

Just posting into a vacuum...............................................~~~~
Author:  NewLancerMan [ Fri Jan 06, 2006 8:20 am ]
Post subject: 
Quote:
Ok for the 3rd time....nah,,,,,no one can read my posts anyways....

Just posting into a vacuum..........

Oh well.....next he will ask if it will work with a Super 6....

Just posting into a vacuum...............................................~~~~
I can see it!! :D I also recall that gearhead had his compcams 264 reground to make it work better. terry i'm sure you'll find something.
Author:  SlantSixDan [ Fri Jan 06, 2006 9:37 am ]
Post subject: 
Quote:
Ok for the 3rd time....nah,,,,,no one can read my posts anyways....

Just posting into a vacuum..........

Oh well.....next he will ask if it will work with a Super 6....

Just posting into a vacuum...............................................~~~~
Image
Author:  NewLancerMan [ Fri Jan 06, 2006 10:07 am ]
Post subject: 
ah I really shouldn't read this stuff while drinking my first cup of coffee...I think its more like this one for Sandy

Image
Author:  terryx [ Fri Jan 06, 2006 12:09 pm ]
Post subject:  cam
sorry for the cam madness, I've not been myself lately and my wife just does not unstand quest for the perfect 6 :oops:

thanks for the diagram of the new electric mopar powerhouse. It needs a good cam in it though :roll:
Author:  NewLancerMan [ Fri Jan 06, 2006 2:22 pm ]
Post subject: 
terry, perhaps the comp cams?

BTW where in Bay are you? I'm in RWC, we should get together

MJ
Author:  SlantSixDan [ Fri Jan 06, 2006 2:34 pm ]
Post subject: 
Quote:
terry, perhaps the comp cams?
H'mmm...which slant do you have a Comp cam in? Which one?

(As Sandy said: Read the whole thread!)

Image
Author:  sick6 [ Fri Jan 06, 2006 5:09 pm ]
Post subject: 
Quote:
have any of you guys ever used a Clifford cam at all?
yes, Dan i know they oversell
but i'm curious as to performance effects
I have a clifford cam in my slant:

http://www.slantsix.org/forum/viewtopic.php?t=13881

but, bummer is she hasn't been on the road yet to play with her. I do plan on posting a comparison since I have some videos detailing what I have done from each upgrade. its awhile in the future though.......

by the way, it took 2 months to get my cam from clifford, but mine was a custom grind.
Author:  NewLancerMan [ Fri Jan 06, 2006 5:39 pm ]
Post subject: 
Quote:
H'mmm...which slant do you have a Comp cam in? Which one?

(As Sandy said: Read the whole thread!)

Image
I was refering to his question as to which cam he should run in the vacuum cleaner ;)
Page 2 of 2 All times are UTC-08:00
Powered by phpBB® Forum Software © phpBB Limited
https://www.phpbb.com/