Slant Six Forum
https://slantsix.org/forum/

New To Working On Old Cars? Get These Three Books!
https://slantsix.org/forum/viewtopic.php?t=15780		 Page 2 of 3
Author:  kmccabe56 [ Thu Feb 14, 2008 6:54 pm ]
Post subject: 
Very likely both of the aftermarket books as well as the service manuals, and possible even parts catalogues can be found through abebooks.com
Author:  75plyduster [ Fri Mar 07, 2008 5:49 pm ]
Post subject: 
Do these books contain distributor info? Like recurve and advance.
Author:  slantvaliant [ Fri Mar 07, 2008 6:42 pm ]
Post subject: 
Quote:
Do these books contain distributor info? Like recurve and advance.
They'll have some information on distributors and tuning. Recurve instructions can be found in this forum.
Author:  infinite15 [ Wed Sep 03, 2008 4:19 pm ]
Post subject:  which year manuals?
I have a 74 swinger special edition, but I believe the engine is from a 79 aspen. But it is the super six setup. Would I be fine with just getting all the manuals from 74 or should I get the service manual from 79 for the engine, and the chassis and electrical from 74?
Author:  SlantSixDan [ Wed Sep 03, 2008 4:56 pm ]
Post subject: 
Get the '74 books. There are some differences in the '79 vs. '74 engine (cast crank instead of forged, peanut taper-seat spark plugs) but you'll get the most useful info out of '74 books. If you need info on the '79 engine specifically, ask here on the board.
Author:  pharmboy [ Wed Sep 03, 2008 5:18 pm ]
Post subject: 
Another place to find automotive literature...flea markets...every one I go to, there's at least one or two guys who have what seems like stacks of old service manuals...and the prices are usually phenomenal. And I scored a flip-top gas cap, a little pitted for $10 last weekend.
Author:  Red [ Wed Sep 03, 2008 6:22 pm ]
Post subject: 
I actually stumbled across a copy of Stockel recently and bought it. Excellent recommendation, Dan. I have several "generic", basic mechanics books, but have to agree that that is among the very best. Thanks for bringing it to our attention!
Author:  armyofchuckness [ Wed Sep 03, 2008 9:00 pm ]
Post subject: 
Ooh. I'm bookmarking this topic. These definitely sound like what I'll need. Has anyone bought there manual on CD? I'm curious as to how that works. I'm assuming it's all PDF files.
Author:  pharmboy [ Wed Sep 03, 2008 9:25 pm ]
Post subject: 
What about the Mopar 6-Cylinder Performance Manual? I found it pretty informative...it even covers the V-6 engines
Author:  stephaniebrite77 [ Wed Sep 03, 2008 10:12 pm ]
Post subject: 
Quote:
Ooh. I'm bookmarking this topic. These definitely sound like what I'll need. Has anyone bought there manual on CD? I'm curious as to how that works. I'm assuming it's all PDF files.
Chuck, my manual is off a CD, and yes it's one large PDF file. Mine is setup so that I can click on each section to get there quickly, and I enjoy the search function so I can find what I need relatively quickly. I usually save the pages I print in case in need them again, unless they get destroyed, in which case the paper gets recycled and I can make nice shiny clean ones when I need them.
I do intend on getting a physical manual at some point for situations when a computer wouldn't be available.
As usual, each option has its own pros and cons.
Author:  infinite15 [ Wed Sep 03, 2008 10:24 pm ]
Post subject: 
Be sure to check around. As I have been looking for my manuals now, I'm finding that a lot of the CD's cost more or as much to get the book somewhere else. But like it was said, they both have their advantages.
Author:  D15083 [ Sat Mar 14, 2009 7:48 pm ]
Post subject:  question
hey dan got a question , in this sticky you say the manuals will tell you everything about the /6 and how every thing works and to repair it but you also say "ON YOUR CAR" can you tell me if this applies to 83 dodge d150 trucks also. thanks for your help so far. steve
Author:  SlantSixDan [ Sat Mar 14, 2009 8:28 pm ]
Post subject: 
Yes, by "car" I meant "vehicle". Passenger car, van, truck, whatever.
Author:  Reed [ Tue Feb 09, 2010 9:35 am ]
Post subject: 
Picked up a 1974 copy of the Stockel book. Hardbound ex-classroom textbook. Cost me $4, and $3.99 of that was shipping. Haven't gotten into it much, but just skimming it makes me excited to dig in.
Author:  kesteb [ Tue Feb 09, 2010 6:10 pm ]
Post subject: 
I picked up a FSM for my '65 Dart. It really hasn't been much help. The one time that I needed it, the picture was backwards and the description was lacking. I fine my vintage Chiltons to be more useful.
Page 2 of 3 All times are UTC-08:00
Powered by phpBB® Forum Software © phpBB Limited
https://www.phpbb.com/