Just keep on dancing . Dancing and a prancing. BAD Dart. Thanks Ron Parker
Bagel Is Going To Juice His Car . We Doint Need No Stinking Juice
We Are Going To Blow His Door Right Off. Pressure Is On Bagel.
| Slant Six Forum https://slantsix.org/forum/ |
|
| How to build a turbo header for any slant six and make it go https://slantsix.org/forum/viewtopic.php?t=21189 |
Page 2 of 2 |
| Author: | Ron Parker [ Wed Jan 17, 2007 7:44 pm ] |
| Post subject: | |
Just keep on dancing . Dancing and a prancing. BAD Dart. Thanks Ron Parker Bagel Is Going To Juice His Car . We Doint Need No Stinking Juice We Are Going To Blow His Door Right Off. Pressure Is On Bagel. |
|
| Author: | james jaggers [ Thu Jan 18, 2007 2:23 pm ] |
| Post subject: | Flanges |
I made a mistake, the flanges for the t- 4 is 3/8 inch not one half. |
|
| Author: | Ron Parker [ Thu Jan 18, 2007 5:22 pm ] |
| Post subject: | |
Whoa that had me skered 1/2 header flange. OK keep us posted . Thanks Ron Parker Im Going To Blow Bagels Yankee Doors Off |
|
| Author: | james jaggers [ Thu Jan 18, 2007 7:18 pm ] |
| Post subject: | ceramic coating |
I have already found someone to ceramic coat all the headers I am making. I am taking him some tomorrow. It is a header for a 360 magnum engine that is pushing air. I want to see the work that he does. Hopefully all the slant six turbo headers will look like polished aluminum that can withstand 2000 degrees of heat. |
|
| Author: | james jaggers [ Tue Jan 23, 2007 8:10 pm ] |
| Post subject: | t-3 and t-4 |
I have some t3 and t4 flanges, I will be able to make the headers fit either type of turbo. |
|
| Author: | james jaggers [ Thu Jan 25, 2007 9:49 pm ] |
| Post subject: | flanges |
Some more of my flanges came in today. It will not be long now! |
|
| Page 2 of 2 | All times are UTC-08:00 |
| Powered by phpBB® Forum Software © phpBB Limited https://www.phpbb.com/ |
|