Slant Six Forum
https://slantsix.org/forum/

Higher amp alternator?
https://slantsix.org/forum/viewtopic.php?t=25109		 Page 2 of 2
Author:  Pierre [ Fri Sep 28, 2007 7:06 pm ]
Post subject: 
I started out with one of andyf (arengineering) kits - he isn't making them anymore, I snagged one from parts forum here. I beefed the brackets up a bit because the brackets shook a little. They were meant for the smaller gm alternators not the cs144 monstrosity.

I think theres still a pic on his website. I'll get some pix in a few days.
Author:  Sam Powell [ Sat Sep 29, 2007 7:13 am ]
Post subject: 
SlantSixDan gave me a link to an available adapter that I have bookmarked. I don;t have time now, but I will post it here tonight.

Sam
Author:  SlantSixDan [ Sat Sep 29, 2007 7:41 am ]
Post subject: 
Too late, I already posted it! :lol: (scroll up the thread)
Author:  ceej [ Sat Sep 29, 2007 2:52 pm ]
Post subject: 
Just got back from Peoria Electric.

New bearings, brushes, Turned the contact surfaces. Made 50 Amps on his machine.

$33.50

It's super quiet now.

Jim pointed out that sometimes the pulley doesn't want to come off of the shaft. No problem with mine, so not an issue.

I asked him about cleaning the alternator in my tank. He said Stoddard Solvent wouldn't hurt it.

CJ
Author:  Sam Powell [ Sat Sep 29, 2007 7:17 pm ]
Post subject: 
Oops! I keep thinking I can see without my glasses. :cry: It's either optimism or just delusional thinking. When I try to read in the morning without my glasses, and I am in hurry to get off to work, then we are all really in trouble. :lol:

Sam
Author:  Mister Twister [ Sun Sep 30, 2007 4:27 am ]
Post subject: 
Hello all for all mopar alternators 110amp rotor and stater kit, available at any alternator shop. Get a smaller pulley also, as it needs to spin up higher to produce the amps for night time driving @ idle. dodgegirl runs 3 of these in radio competition for many years without fail. Hope this helps Don
Author:  SlantSixDan [ Sun Sep 30, 2007 6:33 am ]
Post subject: 
:roll:
Author:  Mister Twister [ Mon Oct 01, 2007 3:29 am ]
Post subject: 
Hay Dan are you trying to run me off or what? Your problem goes alot farther then this board I see. Just helping people when I can. Not putting them down cause they might not know something. We are starting our own freindly Mopar Form see you there.
Author:  ceej [ Mon Oct 01, 2007 7:06 am ]
Post subject: 
Does she do DX'ing or some other radio fun? :D
Three at once? :shock: Or three separate installations?

CJ
Author:  Pierre [ Mon Oct 01, 2007 10:14 am ]
Post subject: 
Do they even make smaller pulleys for the stock alternators?
Author:  SlantSixDan [ Mon Oct 01, 2007 10:22 am ]
Post subject: 
Smallest one made is 2½". Those "high amp conversion kits" greatly aggravate the poor low-RPM charging problem, and cause other problems as well.
Author:  Mister Twister [ Tue Oct 02, 2007 3:51 am ]
Post subject: 
Yes thay make small pullys for these. DX and radio comp Three at one time Look @ dodgegirls radio page. One to run the car and driver amp :) , and other two run the large amp on a 12 to 24 volt system :twisted: . 5 batteries she has not lost in her class yet!!! :D Have a good day Don
Page 2 of 2 All times are UTC-08:00
Powered by phpBB® Forum Software © phpBB Limited
https://www.phpbb.com/