Something Is Wrong, Help w/ Deck Height

Unanswered topics | Active topics

Home » Board index » Racing » Racing Q & A

All times are UTC-08:00

Post new topic Reply to topic

Page 2 of 2

[ 17 posts ]

Go to page Previous 1 2

Print view

Previous topic | Next topic

Author

Message

Dart270

Post subject:

PostPosted: Wed Feb 27, 2008 5:40 am

Offline

Board Sponsor & Moderator

Joined: Mon Oct 21, 2002 11:08 am
Posts: 17309
Location: Blacksburg, VA
Car Model:

OK, I would shoot for 10:1 or so with stock pistons. You need to mill about 0.100" off the block and about 0.050" off the head (or some other combination) for that. You could also do an "angle mill" on the head. Ask for 0.080" off the manifolds side and 0.180" off the plug side and that will put you around 10:1.

With that, you can safely get a 0.500-0.550" cam and not have the valves hit the pistons.

Lou

_________________
Home of Slant6-powered fun machines since 1988

Top

Profile

Reply with quote

HAGR GAS RAIL

Post subject:

PostPosted: Thu Feb 28, 2008 2:46 pm

Offline

2 BBL ''SuperSix''

Joined: Mon Feb 25, 2008 6:56 pm
Posts: 13
Car Model:

thanks lou is there a benefit to angel milling thanks again bill